Please wait a minute...
金属学报  2026, Vol. 62 Issue (5): 890-904    DOI: 10.11900/0412.1961.2025.00297
  综述 本期目录 | 过刊浏览 |
基于同步辐射原位表征技术的镁合金研究进展
郭恩宇1,2(), 杜泽龙1, 李炳志1, 王同敏1,2()
1 大连理工大学 材料科学与工程学院 辽宁省凝固控制与数字化制备技术重点实验室 大连 116024
2 大连理工大学宁波研究院 宁波 315032
Research Progress on Magnesium Alloys Based on Synchrotron Radiation In Situ Characterization Techniques
GUO Enyu1,2(), DU Zelong1, LI Bingzhi1, WANG Tongmin1,2()
1 Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
2 Ningbo Research Institute of Dalian University of Technology, Ningbo 315032, China
引用本文:

郭恩宇, 杜泽龙, 李炳志, 王同敏. 基于同步辐射原位表征技术的镁合金研究进展[J]. 金属学报, 2026, 62(5): 890-904.
Enyu GUO, Zelong DU, Bingzhi LI, Tongmin WANG. Research Progress on Magnesium Alloys Based on Synchrotron Radiation In Situ Characterization Techniques[J]. Acta Metall Sin, 2026, 62(5): 890-904.

全文: PDF(4750 KB)   HTML
摘要: 

镁合金具有低密度、高比强度、生物相容性好等特点,被广泛应用于航空航天、交通运输和生物医疗等领域。阐明制备过程和服役过程中材料微观结构的动态演变规律,是材料成分设计与加工工艺优化,以及服役性能提升的重要基础。同步辐射光源可产生高通量、高分辨率及高相干性的X射线光束,能够实现合金在制备加工全流程及模拟服役环境中微观结构演化的原位动态表征。本文简要介绍了国内外基于同步辐射光源的原位样品环境装置建设现状,系统总结了近年来利用同步辐射先进表征技术研究镁合金微观组织演化机制的相关工作,内容涵盖凝固、变形与损伤、腐蚀与防护等。最后对同步辐射技术在镁合金研究领域的未来发展方向进行了展望。

关键词 : 同步辐射,  镁合金,  原位表征,  微观组织演化    
Abstract:

Magnesium alloys are widely employed in lightweight applications such as aerospace, transportation, and biomedical devices due to their low density, high specific strength, and good biocompatibility. Elucidating the dynamic evolution of microstructures during preparation and service is essential for alloy compositional design, processing optimization, and performance enhancement. Synchrotron radiation sources, which generate X-ray beams with high flux, high resolution, and high coherence, enable in situ dynamic characterization of microstructural evolution in magnesium alloys throughout the entire processing chain and under simulated service conditions. This paper briefly overviews the development of in situ sample environment devices at synchrotron facilities worldwide. It also systematically outlines recent research on the microstructural evolution mechanisms of magnesium alloys investigated using this advanced technology, covering solidification, deformation and damage, as well as corrosion and protection. Finally, future directions for the application of synchrotron radiation technology in magnesium alloy research are discussed.

Key words: synchrotron radiation    magnesium alloy    in situ characterization    microstructural evolution
收稿日期: 2025-09-28     
ZTFLH:  TG115.22  
基金资助:国家自然科学基金项目(52371005);国家自然科学基金项目(52531001);国家自然科学基金项目(52534009)
通讯作者: 郭恩宇,eyguo@dlut.edu.cn,主要从事高性能镁铝合金及其复合材料研究; 王同敏,tmwang@dlut.edu.cn,主要从事金属凝固理论和凝固组织控制技术相关研究
Corresponding author: GUO Enyu, professor, Tel: (0411)84709500, E-mail: eyguo@dlut.edu.cn; WANG Tongmin, professor, Tel: (0411)84706790, E-mail: tmwang@dlut.edu.cn
作者简介: 郭恩宇,男,1985年生,教授,博士
图1  基于同步辐射X射线的原位凝固与力学加载装置[12,13,15,16]
图2  电磁场作用下基于同步辐射光源的凝固行为实时成像装置示意图[17,18]和照片及多功能/多环境服役原位加载装置
图3  同步辐射原位四维成像技术揭示镁合金中的晶体生长与粗化机制[30,36]
图4  同步辐射X射线原位衍射技术在镁合金变形过程中的典型应用[53,55]
图5  同步辐射X射线原位成像技术在镁合金损伤断裂过程中的典型应用[67,70,71]
图6  同步辐射成像技术在镁合金腐蚀防护领域的应用[81,82,85,86]
[1] Zhu Q C, Li Y X, Cao F Y, et al. Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film [J]. Nat. Commun., 2022, 13: 5838
doi: 10.1038/s41467-022-33480-w pmid: 36192418
[2] Yu M D, Li Y F, Guo H, et al. Anomalous strain hardening via manipulating basal/pyramidal dislocation interactions in the Mg-Y-Ca alloy [J]. Acta Mater., 2025, 296: 121309
doi: 10.1016/j.actamat.2025.121309
[3] Guru M K, Bohlen J, Aydin R C, et al. Machine learning pipeline for structure-property modeling in Mg-alloys using microstructure and texture descriptors [J]. Acta Mater., 2025, 295: 121132
doi: 10.1016/j.actamat.2025.121132
[4] Ma C, Yu W, Zhang Z, et al. The effect of slow shot speed and casting pressure on the 3D microstructure of high pressure die casting AE44 magnesium alloy [J]. J. Magnes. Alloy., 2023, 11: 753
doi: 10.1016/j.jma.2021.09.011
[5] Paliwal M, Jung I H. The evolution of the growth morphology in Mg-Al alloys depending on the cooling rate during solidification [J]. Acta Mater., 2013, 61: 4848
doi: 10.1016/j.actamat.2013.04.063
[6] Ni R, Boehlert C J, Chen B, et al. Temperature-dependent interplay of intra- and inter-granular deformation mechanisms in Mg-10Y: Statistical analysis from an HRDIC perspective [J]. Acta Mater., 2025, 296: 121256
doi: 10.1016/j.actamat.2025.121256
[7] Jeong J, Alfreider M, Konetschnik R, et al. In-situ TEM observation of 10 1 ¯ 2 twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency [J]. Acta Mater., 2018, 158: 407
doi: 10.1016/j.actamat.2018.07.027
[8] Fan X Q, Fleming T G, Clark S J, et al. Magnetic modulation of keyhole instability during laser welding and additive manufacturing [J]. Science, 2025, 387: 864
doi: 10.1126/science.ado8554 pmid: 39977505
[9] Ajayi T M, Shirato N, Rojas T, et al. Characterization of just one atom using synchrotron X-rays [J]. Nature, 2023, 618: 69
doi: 10.1038/s41586-023-06011-w
[10] Guo E Y, Du Z L, Chen X B, et al. Development of magnesium alloys: Advanced characterization using synchrotron radiation techniques [J]. J. Mater. Sci. Technol., 2024, 195: 93
doi: 10.1016/j.jmst.2024.01.029
[11] Mathiesen R H, Arnberg L, Mo F, et al. Time resolved X-ray imaging of dendritic growth in binary alloys [J]. Phys. Rev. Lett., 1999, 83: 5062
doi: 10.1103/PhysRevLett.83.5062
[12] Abou-Khalil L, Da Cruz K S, Reinhart G, et al. Influence of growth velocity on fragmentation during directional solidification of Al-14 wt.% Sn alloy studied by in-situ synchrotron X-radiography [J]. Acta Mater., 2022, 241: 118370
doi: 10.1016/j.actamat.2022.118370
[13] Azeem M A, Lee P D, Phillion A B, et al. Revealing dendritic pattern formation in Ni, Fe and Co alloys using synchrotron tomography [J]. Acta Mater., 2017, 128: 241
doi: 10.1016/j.actamat.2017.02.022
[14] Buffiere J Y, Maire E, Adrien J, et al. In situ experiments with X ray tomography: An attractive tool for experimental mechanics [J]. Exp. Mech., 2010, 50: 289
doi: 10.1007/s11340-010-9333-7
[15] Bale H A, Haboub A, MacDowell A A, et al. Real-time quantitative imaging of failure events in materials under load at temperatures above 1, 600  oC [J]. Nat. Mater., 2013, 12: 40
doi: 10.1038/nmat3497
[16] Zhang K, Wigger T, Pineda R, et al. Unravelling dynamic recrystallisation in a microalloyed steel during rapid high temperature deformation using synchrotron X-rays [J]. Acta Mater., 2024, 278: 120265
doi: 10.1016/j.actamat.2024.120265
[17] Wang T M, Cao F, Zhou P, et al. Study on diffusion behavior and microstructural evolution of Al/Cu bimetal interface by synchrotron X-ray radiography [J]. J. Alloys Compd., 2014, 616: 550
doi: 10.1016/j.jallcom.2014.07.172
[18] Wang T M, Xu J J, Xiao T Q, et al. Evolution of dendrite morphology of a binary alloy under an applied electric current: An in situ observation [J]. Phys. Rev., 2010, 81E: 042601
[19] Zhang W, Simpson C A, Leitner T, et al. The effect of anisotropic microstructure on the crack growth and fatigue overload behaviour of ultrafine-grained nickel [J]. Acta Mater., 2020, 184: 225
doi: 10.1016/j.actamat.2019.11.024
[20] Wu Z K, Wu S C, Kruzic J J, et al. Critical damage events of 3D printed AlSi10Mg alloy via in situ synchrotron X-ray tomography [J]. Acta Mater., 2025, 282: 120464
doi: 10.1016/j.actamat.2024.120464
[21] Lin Y, Qian W J, Lei L M, et al. Structural integrity issues of composite materials and structures in future transportation equipment [J]. Compos. Struct., 2025, 358: 118943
doi: 10.1016/j.compstruct.2025.118943
[22] Casari D, Mirihanage W U, Falch K V, et al. α-Mg primary phase formation and dendritic morphology transition in solidification of a Mg-Nd-Gd-Zn-Zr casting alloy [J]. Acta Mater., 2016, 116: 177
doi: 10.1016/j.actamat.2016.06.035
[23] Du J, Zhang A, Guo Z, et al. Effect of additional solute elements (X = Al, Ca, Y, Ba, Sn, Gd and Zn) oncrystallographic anisotropy during the dendritic growth of magnesium alloys [J]. J. Alloys Compd., 2019, 775: 322
doi: 10.1016/j.jallcom.2018.10.145
[24] Tang Y, Wu Y, Zhang Y, et al. Intermittent nucleation and periodic growth of grains under thermo-solutal convection during directional solidification of Al-Cu alloy [J]. Acta Mater., 2021, 212: 116861
doi: 10.1016/j.actamat.2021.116861
[25] Wang M Y, Jing T, Liu B C. Phase-field simulations of dendrite morphologies and selected evolution of primary α-Mg phases during the solidification of Mg-rich Mg-Al-based alloys [J]. Scr. Mater., 2009, 61: 777
doi: 10.1016/j.scriptamat.2009.06.028
[26] Yang M, Xiong S M, Guo Z. Characterisation of the 3-D dendrite morphology of magnesium alloys using synchrotron X-ray tomography and 3-D phase-field modelling [J]. Acta Mater., 2015, 92: 8
doi: 10.1016/j.actamat.2015.03.044
[27] Yang M, Xiong S M, Guo Z. Effect of different solute additions on dendrite morphology and orientation selection in cast binary magnesium alloys [J]. Acta Mater., 2016, 112: 261
doi: 10.1016/j.actamat.2016.04.014
[28] Shuai S S, Guo E Y, Wang J, et al. Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys [J]. Acta Mater., 2018, 156: 287
doi: 10.1016/j.actamat.2018.06.026
[29] Shuai S S, Guo E Y, Phillion A B, et al. Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys [J]. Acta Mater., 2016, 118: 260
doi: 10.1016/j.actamat.2016.07.047
[30] Guo E Y, Phillion A B, Cai B, et al. Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography [J]. Acta Mater., 2017, 123: 373
doi: 10.1016/j.actamat.2016.10.022
[31] Aagesen L K, Johnson A E, Fife J L, et al. Universality and self-similarity in pinch-off of rods by bulk diffusion [J]. Nat. Phys., 2010, 6: 796
[32] Gu L D, Shang X Q, Wang J, et al. The influence of SiC-Al2O3 reinforcements on the deformation and fracture mechanism of thixomolded Mg-based composite [J]. J. Mater. Sci., 2024, 59: 9892
doi: 10.1007/s10853-024-09386-x
[33] Huang S J, Subramani M, Ali A N, et al. The effect of micro-SiCp content on the tensile and fatigue behavior of AZ61 magnesium alloy matrix composites [J]. Int. J. Metalcast., 2021, 15: 780
doi: 10.1007/s40962-020-00508-0
[34] Wang P B, Shen J, Chen T J, et al. Simultaneously improving the strength and ductility of AZ91/GNPs composites through decorating graphene nanoplatelets with MgO [J]. J. Mater. Sci. Technol., 2024, 183: 133
doi: 10.1016/j.jmst.2023.10.020
[35] Pu Z P, Wang S F, Yan Q, et al. Grain refinement mechanism of SiC nanoparticles/Mg-9 wt.% Al composite investigated by sharp interface model at microscale and nanoscale [J]. J. Alloys Compd., 2022, 922: 166269
doi: 10.1016/j.jallcom.2022.166269
[36] Guo E Y, Shuai S S, Kazantsev D, et al. The influence of nanoparticles on dendritic grain growth in Mg alloys [J]. Acta Mater., 2018, 152: 127
doi: 10.1016/j.actamat.2018.04.023
[37] Du Z L, Wang C, Liu F Y, et al. Unraveling the individual and synergistic effects of copper and gadolinium on the microstructure and mechanical properties of Mg-6Zn-0.5Ca alloy [J]. J. Alloys Compd., 2025, 1036: 181421
doi: 10.1016/j.jallcom.2025.181421
[38] Du Z L, Yang X Q, Wang Q, et al. A synergetic approach to enhancing mechanical properties of trace TiB2 particles reinforced AZ91D composites through α-Mg grain refinement and β-Mg17Al12 manipulation [J]. Composites, 2025, 198: 109114
[39] Yang X Q, Du Z L, Guo E Y, et al. Achieving simultaneous refinement of α-Mg grains and β-Mg17Al12 phases via trace multi-scale TiB2 for strength-ductility synergy in AZ91D composites [J]. J. Alloys Compd., 2025, 1048: 185116
doi: 10.1016/j.jallcom.2025.185116
[40] Wu H Z, Du Z L, An Y K, et al. Grain refinement and mechanical property enhancement of AM60B magnesium alloy via TiB2 particle regulation [J]. Mater. Today Commun., 2025, 47: 112999
[41] Ma C S, Yu W B, Zhang T T, et al. The effect of slow shot speed and casting pressure on the 3D microstructure of high pressure die casting AE44 magnesium alloy [J]. J. Magnes. Alloy., 2023, 11: 753
doi: 10.1016/j.jma.2021.09.011
[42] Walmsley I A. Quantum optics: Science and technology in a new light [J]. Science, 2015, 348: 525
doi: 10.1126/science.aab0097 pmid: 25931550
[43] Trang T T T, Zhang J H, Kim J H, et al. Designing a magnesium alloy with high strength and high formability [J]. Nat. Commun., 2018, 9: 2522
doi: 10.1038/s41467-018-04981-4 pmid: 29955065
[44] Offerman S E, van Dijk N H, Sietsma J, et al. Grain nucleation and growth during phase transformations [J]. Science, 2002, 298: 1003
pmid: 12411699
[45] Zhou X L, Feng Z Q, Zhu L L, et al. High-pressure strengthening in ultrafine-grained metals [J]. Nature, 2020, 579: 67
doi: 10.1038/s41586-020-2036-z
[46] Zhang D S, Liu W, Li Y X, et al. In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process [J]. Nat. Commun., 2023, 14: 2961
doi: 10.1038/s41467-023-38727-8 pmid: 37221206
[47] Schmidt S, Nielsen S F, Gundlach C, et al. Watching the growth of bulk grains during recrystallization of deformed metals [J]. Science, 2004, 305: 229
pmid: 15247474
[48] Oddershede J, Camin B, Schmidt S, et al. Measuring the stress field around an evolving crack in tensile deformed Mg AZ31 using three-dimensional X-ray diffraction [J]. Acta Mater., 2012, 60: 3570
doi: 10.1016/j.actamat.2012.02.054
[49] Huang Z H, Wang L Y, Zhou B J, et al. Observation of non-basal slip in Mg-Y by in situ three-dimensional X-ray diffraction [J]. Scr. Mater., 2018, 143: 44
doi: 10.1016/j.scriptamat.2017.09.011
[50] Zhang N B, Zhang Y Y, Chen S, et al. Onset of detwinning in Mg-3Al-1Zn alloy: A synchrotron-based X-ray diffraction study [J]. Scr. Mater., 2021, 190: 113
doi: 10.1016/j.scriptamat.2020.08.044
[51] Yi S B, Davies C H J, Brokmeier H G, et al. Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading [J]. Acta Mater., 2006, 54: 549
doi: 10.1016/j.actamat.2005.09.024
[52] Wang W Y, Tang B, Shang S L, et al. Local lattice distortion mediated formation of stacking faults in Mg alloys [J]. Acta Mater., 2019, 170: 231
doi: 10.1016/j.actamat.2019.03.030
[53] Garces G, Morris D G, Muñoz-Morris M A, et al. Plasticity analysis by synchrotron radiation in a Mg97Y2Zn1 alloy with bimodal grain structure and containing LPSO phase [J]. Acta Mater., 2015, 94: 78
doi: 10.1016/j.actamat.2015.04.048
[54] Garces G, Medina J, Perez P, et al. The effect of temperature on load partitioning evolution in magnesium metal matrix composite reinforced with Ti particles using in-situ synchrotron radiation diffraction experiments [J]. J. Magnes. Alloy., 2023, 11: 706
doi: 10.1016/j.jma.2022.09.022
[55] Arul Kumar M, Clausen B, Capolungo L, et al. Deformation twinning and grain partitioning in a hexagonal close-packed magnesium alloy [J]. Nat. Commun., 2018, 9: 4761
doi: 10.1038/s41467-018-07028-w pmid: 30420672
[56] Bong H J, Hu X H, Sun X, et al. Mechanism-based constitutive modeling of ZEK100 magnesium alloy with crystal plasticity and in-situ HEXRD experiment [J]. Int. J. Plast., 2019, 113: 35
doi: 10.1016/j.ijplas.2018.09.005
[57] Zhang H J, Jérusalem A, Salvati E, et al. Multi-scale mechanisms of twinning-detwinning in magnesium alloy AZ31B simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD [J]. Int. J. Plast., 2019, 119: 43
doi: 10.1016/j.ijplas.2019.02.018
[58] Wang H, Clausen B, Tomé C N, et al. Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension [J]. Acta Mater., 2013, 61: 1179
doi: 10.1016/j.actamat.2012.10.027
[59] Hu X H, Sun X, Hector L G, et al. Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach [J]. Acta Mater., 2017, 132: 230
doi: 10.1016/j.actamat.2017.04.028
[60] Jia N, Cong Z H, Sun X, et al. An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels [J]. Acta Mater., 2009, 57: 3965
doi: 10.1016/j.actamat.2009.05.002
[61] Abdolvand H, Daymond M R, Mareau C. Incorporation of twinning into a crystal plasticity finite element model: Evolution of lattice strains and texture in Zircaloy-2 [J]. Int. J. Plast., 2011, 27: 1721
doi: 10.1016/j.ijplas.2011.04.005
[62] Agnew S R, Singh A, Calhoun C A, et al. In-situ neutron diffraction of a quasicrystal-containing Mg alloy interpreted using a new polycrystal plasticity model of hardening due to {10.2} tensile twinning [J]. Int. J. Plast., 2018, 100: 34
doi: 10.1016/j.ijplas.2017.09.005
[63] Agnew S R, Mulay R P, Polesak F J, et al. In situ neutron diffraction and polycrystal plasticity modeling of a Mg-Y-Nd-Zr alloy: Effects of precipitation on individual deformation mechanisms [J]. Acta Mater., 2013, 61: 3769
doi: 10.1016/j.actamat.2013.03.010
[64] Neil C J, Wollmershauser J A, Clausen B, et al. Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction [J]. Int. J. Plast., 2010, 26: 1772
doi: 10.1016/j.ijplas.2010.03.005
[65] Wang H M, Wu P D, Kurukuri S, et al. Strain rate sensitivities of deformation mechanisms in magnesium alloys [J]. Int. J. Plast., 2018, 107: 207
doi: 10.1016/j.ijplas.2018.04.005
[66] Lee S, Pilipchuk M, Yildirim C, et al. Three-dimensional nucleation and growth of deformation twins in magnesium [J]. Science, 2025, 389: 632
doi: 10.1126/science.adv3460 pmid: 40773550
[67] Wang C, Du Z L, Guo E Y, et al. Mechanical behavior of SiC reinforced ZA63 Mg matrix composites: Experiments and 3D finite element modelling [J]. J. Magnes. Alloy., 2025, 13: 1294
doi: 10.1016/j.jma.2024.03.027
[68] Hu Y N, Wu S C, Guo Y, et al. Inhibiting weld cracking in high-strength aluminium alloys [J]. Nat. Commun., 2022, 13: 5816
doi: 10.1038/s41467-022-33188-x pmid: 36192380
[69] An Y K, Guo E Y, Xia D Y, et al. A new strategy for fabricating Mg-Al alloys with excellent strength-ductility synergy via pulse-coupled wire-arc directed energy deposition [J]. Int. J. Plast., 2026, 196: 104550
doi: 10.1016/j.ijplas.2025.104550
[70] Kondori B, Morgeneyer T F, Helfen L, et al. Void growth and coalescence in a magnesium alloy studied by synchrotron radiation laminography [J]. Acta Mater., 2018, 155: 80
doi: 10.1016/j.actamat.2018.05.026
[71] Wang Z Y, Wu S C, Kang G Z, et al. In-situ synchrotron X-ray tomography investigation of damage mechanism of an extruded magnesium alloy in uniaxial low-cycle fatigue with ratchetting [J]. Acta Mater., 2021, 211: 116881
doi: 10.1016/j.actamat.2021.116881
[72] Karagadde S, Lee P D, Cai B, et al. Transgranular liquation cracking of grains in the semi-solid state [J]. Nat. Commun., 2015, 6: 8300
doi: 10.1038/ncomms9300 pmid: 26353994
[73] Azghandi S H M, Weiss M, Arhatari B D, et al. A rationale for the influence of grain size on failure of magnesium alloy AZ31: An in situ X-ray microtomography study [J]. Acta Mater., 2020, 200: 619
doi: 10.1016/j.actamat.2020.09.016
[74] Kumar R, Lhuissier P, Villanova J, et al. Elementary growth mechanisms of creep cavities in AZ31 alloy revealed by in situ X-ray nano-tomography [J]. Acta Mater., 2022, 228: 117760
doi: 10.1016/j.actamat.2022.117760
[75] Zeller-Plumhoff B, Robisch A L, Pelliccia D, et al. Nanotomographic evaluation of precipitate structure evolution in a Mg-Zn-Zr alloy during plastic deformation [J]. Sci. Rep., 2020, 10: 16101
doi: 10.1038/s41598-020-72964-x pmid: 32999352
[76] Pollock T M. Weight loss with magnesium alloys [J]. Science, 2010, 328: 986
doi: 10.1126/science.1182848 pmid: 20489013
[77] Yang G F, Kim Y C, Han H S, et al. In vitro dynamic degradation behavior of new magnesium alloy for orthopedic applications [J]. J. Biomed. Mater. Res., 2015, 103B: 807
[78] Esmaily M, Svensson J E, Fajardo S, et al. Fundamentals and advances in magnesium alloy corrosion [J]. Prog. Mater. Sci., 2017, 89: 92
doi: 10.1016/j.pmatsci.2017.04.011
[79] Ročňáková I, Montufar E B, Horynová M, et al. Assessment of localized corrosion under simulated physiological conditions of magnesium samples with heterogeneous microstructure: Value of X-ray computed micro-tomography platform [J]. Corros. Sci., 2016, 104: 187
doi: 10.1016/j.corsci.2015.12.009
[80] Zhang C, Liu C, Li X, et al. Quantifying the influence of secondary phases on corrosion in multicomponent Mg alloys using X-ray computed microtomography [J]. Corros. Sci., 2022, 195: 110010
doi: 10.1016/j.corsci.2021.110010
[81] Tian G Y, Wang J S, Zhang C, et al. Quantifying the influence of microstructure on the corrosion of Mg-Li alloys by using X-ray CT [J]. Corros. Sci., 2024, 229: 111848
doi: 10.1016/j.corsci.2024.111848
[82] Wang X J, Chen Z N, Guo E Y, et al. Corrosion process of Mg-Sn alloys revealed via in situ synchrotron X-ray radiography [J]. Mater. Lett., 2022, 308: 131139
doi: 10.1016/j.matlet.2021.131139
[83] Liu X Q, Wang X J, Guo E Y, et al. Influence of deformation on the corrosion behavior of LZ91 Mg-Li alloy [J]. Int. J. Miner. Metall. Mater., 2023, 30: 72
doi: 10.1007/s12613-022-2466-8
[84] Chen Z N, Ji H T, Geng X Q, et al. 3-D distribution characteristics of the micro-defects in the PEO coating on ZM6 Mg-alloy during corrosion [J]. Corros. Sci., 2020, 174: 108821
doi: 10.1016/j.corsci.2020.108821
[85] Li B Z, Ouyang Y B, Guo E Y, et al. Mao-based solid-like slippery composite coating with superior corrosion resistance and robust machinery performance upon magnesium-lithium alloy LA81 [J]. Chem. Eng. J., 2024, 497: 154801
doi: 10.1016/j.cej.2024.154801
[86] Fischerauer S F, Kraus T, Wu X, et al. In vivo degradation performance of micro-arc-oxidized magnesium implants: A micro-CT study in rats [J]. Acta Biomater., 2013, 9: 5411
doi: 10.1016/j.actbio.2012.09.017 pmid: 23022544
[87] Hou X R, Li B Z, Zhou Z H, et al. Superhydrophobic and corrosion-resistant coating on magnesium-lithium alloys [J]. J. Taiwan Inst. Chem. Eng., 2025, 176: 106319
doi: 10.1016/j.jtice.2025.106319
[88] Ouyang Y B, Zhou Z H, Guo E Y, et al. Boosting corrosion resistance of Mg-Li alloy: Implanting bioinspired superhydrophobic surfaces into MAO matrix for enhanced protection [J]. Ceram. Int., 2024, 50: 48425
doi: 10.1016/j.ceramint.2024.09.192
[89] Li B Z, Liu B C, Guo E Y, et al. MAO-based self-healing phase-change solid-like slippery composite coating with superior corrosion resistance and robust machinery performance [J]. J. Mater. Sci. Technol., 2026, 253: 298
doi: 10.1016/j.jmst.2025.05.081
[1] 阴嘉琳, 石磊, 武传松. 超声振动对镁/铝异质合金搅拌摩擦搭接焊接头界面组织演变的影响[J]. 金属学报, 2026, 62(1): 133-147.
[2] 吴泽威, 颜俊雄, 胡励, 韩修柱. 双峰分离非基面织构AZ31镁合金板材反常中温轧制变形行为及机理[J]. 金属学报, 2025, 61(8): 1165-1173.
[3] 王飞翔, 陈忠奉, 尹晓宇, 熊良华, 谢红兰, 邓彪, 肖体乔. 基于X射线体视成像实现高温合金熔体凝固三维显微结构的原位观测[J]. 金属学报, 2025, 61(7): 1109-1118.
[4] 游云翔, 谭力, 高静静, 周涛, 周志明. 利用热轧制-剪切-弯曲工艺及退火调控Mg-Al-Zn-Mn-Ca 镁合金的织构[J]. 金属学报, 2025, 61(6): 866-874.
[5] 曾小勤, 于铭迪, 王静雅. 镁合金的多系滑移与塑性调控[J]. 金属学报, 2025, 61(3): 361-371.
[6] 王慧远, 孟昭元, 贾海龙, 徐新宇, 花珍铭. 新型低合金含量烘烤硬化镁合金研究进展及展望[J]. 金属学报, 2025, 61(3): 372-382.
[7] 蒋斌, 张昂, 宋江凤, 黎田, 游国强, 郑江, 潘复生. 镁合金一体化压铸缺陷控制[J]. 金属学报, 2025, 61(3): 383-396.
[8] 黄科, 李新志, 方学伟, 卢秉恒. 镁合金电弧熔丝增材制造技术研究现状与展望[J]. 金属学报, 2025, 61(3): 397-419.
[9] 付辉, 孙勇, 邹国栋, 张帆, 杨许生, 张涛, 彭秋明. 高性能超高压镁合金研究进展[J]. 金属学报, 2025, 61(3): 475-487.
[10] 周雯慧, 熊锦涛, 黄思程, 王鹏昊, 刘勇. AZ31镁合金双峰组织形成机制及其变形行为[J]. 金属学报, 2025, 61(3): 488-498.
[11] 王升, 朱彦丞, 潘虎成, 李景仁, 曾志浩, 秦高梧. Yb含量对Mg-Gd-Y-Zn-Zr合金微观组织与力学性能的影响[J]. 金属学报, 2025, 61(3): 499-508.
[12] 余东, 马威龙, 王亚莉, 王锦程. Au-Pt合金凝固-固态相变微观组织演化相场法模拟[J]. 金属学报, 2025, 61(1): 109-116.
[13] 王彬杉, 徐光, 任睿, 张强, 单召辉, 樊建锋. 脉冲电流对AZ91镁合金温挤压过程中动态析出和微观组织的影响[J]. 金属学报, 2025, 61(1): 129-142.
[14] 朱桂杰, 王思清, 查敏, 李眉娟, 孙凯, 陈东风. 稀土元素Ce对挤压态Mg-0.3Al-0.2Ca-0.5Mn合金板材体织构及力学各向异性的影响[J]. 金属学报, 2024, 60(8): 1079-1090.
[15] 张星星, LUTZ Andreas, 甘为民, MAAWAD Emad, KRIELE Armin. 退火热处理对增材制造AlSi10Mg合金宏观和微观变形行为的影响[J]. 金属学报, 2024, 60(8): 1091-1099.