Please wait a minute...
金属学报  2008, Vol. 44 Issue (3): 371-374     
  论文 本期目录 | 过刊浏览 |
LaFe11.9-xCoxSi1.1B0.2( x=0.7, 0.8, 0.9)的磁热效应
李福安 松林 包黎红 哈斯朝鲁 特古斯 黄焦宏
内蒙古师范大学功能材料物理与化学自治区重点实验室
Magnetocaloric effect of LaFe11.9-xCoxSi1.1B0.2( x=0.7, 0.8, 0.9)
引用本文:

李福安; 松林; 包黎红; 哈斯朝鲁 ; 特古斯; 黄焦宏 . LaFe11.9-xCoxSi1.1B0.2( x=0.7, 0.8, 0.9)的磁热效应[J]. 金属学报, 2008, 44(3): 371-374 .

全文: PDF(629 KB)  
摘要: 使用电弧熔炼法制备了LaFe11.9-xCoxSi1.1B0.2( x=0.7, 0.8, 0.9)系列化合物。室温下XRD分析表明该系列化合物所成的相基本上都是NaZn13型立方结构单相,除了含有极少量的α-Fe杂相,空间群为Fm-3c。晶格常数(a/Å)随着Co含量的增加而增大,分别为11.487、11.496、11.498 Å;磁性测量发现该系列化合物的居里温度在室温附近,并且也随着Co含量的增加而增加,分别为270,290,300 K。在外场变化ΔB=1.5 T 时,该系列化合物的最大磁熵变达到金属Gd的两倍,相对制冷能力与金属Gd的相对制冷能力基本相同。
关键词 磁熵变金属间化合物相对制冷能力    
Abstract:The LaFe11.9-xCoxSi1.1B0.2 (x=0.7, 0.8, 0.9) compounds were prepared by arc melting. X-ray diffraction analysis shows that the phases of LaFe11.9-xCoxSi1.1B0.2 (x=0.7, 0.8, 0.9) compounds mainly consist of the NaZn13-type cubic structure phase and a small amount of the a-Fe phase. The space group is Fm-3c. It is found that the lattice parameters and the lattice volumes have slightly increase with increasing x. the lattice parameters are found to be 11.487,11.496 and 11.498 Å and the lattice volume is found to be 1515.9,1519.4 and 1519.9 Å3 for x=0.7, 0.8 and 0.9. The magnetic measurement shows that the Curie temperature of the compounds have slightly increased with increasing Co and near the room temperature, 270, 290 and 300 K for x=0.7, 0.8 and 0.9. The maximum values of the magnetic entropy change of LaFe11.9-xCoxSi1.1B0.2 compounds are 7.47, 5.93 and 5.90 Jkg-1K-1 for x=0.7, 0.8 and 0.9 for a field change from 0 to 1.5 T. It markedly exceeds that of pure Gd at the corresponding applied field. The relative cooling power (RCP) based on the magnetic entropy change is as large as that of pure Gd at the corresponding applied field.
Key wordsMagnetic entropy change    Intermetallic compound    Relative cooling power
收稿日期: 2007-07-03     
ZTFLH:  TM271.4  
[1]Zimm C B,Jastrab A,Pecharsky V K,Gschneidner K A Jr,Osborne M,Anderson I.Adv Cryog Eng,1998;43: 1759
[2]Fujita A,Fujieda S,Fukamiehi K.Phys Rev,2001;65 B: 014410
[3]Hu F X,Shen B G,Sun J R,Cheng Z H,Rao G H,Zhang X X.Appl Phys Lett,2001;78:3675
[4]Tegus O,Brück E,Buschow K H J,de Boer F R.Nature, 2002;415:150
[5]Pecharsky V K,Gschneidner K A.Appl Phys Lett,1997; 70:3299
[6]Fujita A,Fujieda S,Hasegawa Y,Fukamichi K.Phys Rev, 2003;67B:104416
[7]Hu F X,Shen B G,Sun J R,Wang G J,Cheng Z H.Appl Phys Lett,2002;80:826
[8]Huang J H,Song L,Jin P Y,Wang G F,Liu J R,Yan H W,Zhang J X.Funct Mater,2006;37:1888 (黄焦宏,松林,金培育,王高峰,刘金荣,闫宏伟,张久兴功能材料,2006;37:1888)
[9]Xie S H,Li J Q,Zhuang Y H.J Magn Magn Mater,2007; 311:589
[10]Entel P,Shr(?)ter M.Physics,1989;161B:160
[11]Sinnema S,Franse J J M,Radwanski R J,Menovsky A, de Boer F R.J Phys F:Met Phys,1987;17:233
[12]Fujita A,Akamatsu Y,Fukamichi K.J Appl Phys,1999; 85:4756
[13]Gschneidner Jr K A,Pecharsky V K.Annu Rev Mater Sci,2000;30:387
[1] 丁宗业, 胡侨丹, 卢温泉, 李建国. 基于同步辐射X射线成像液/固复层界面氢气泡的形核、生长演变与运动行为的原位研究[J]. 金属学报, 2022, 58(4): 567-580.
[2] 周丽君, 位松, 郭敬东, 孙方远, 王新伟, 唐大伟. 基于飞秒激光时域热反射法的微尺度Cu-Sn金属间化合物热导率研究[J]. 金属学报, 2022, 58(12): 1645-1654.
[3] 宫声凯, 尚勇, 张继, 郭喜平, 林均品, 赵希宏. 我国典型金属间化合物基高温结构材料的研究进展与应用[J]. 金属学报, 2019, 55(9): 1067-1076.
[4] 吉华,邓运来,徐红勇,郭伟强,邓建峰,范世通. 焊接线能量对5182-O/HC260YD+Z异种材料CMT搭接接头组织与性能的影响[J]. 金属学报, 2019, 55(3): 376-388.
[5] 陈丽群, 邱正琛, 于涛. Ru对NiAl[100](010)刃型位错电子结构的影响[J]. 金属学报, 2019, 55(2): 223-228.
[6] 曹丽华, 陈胤伯, 史起源, 远杰, 刘志权. 合金元素对中温Sn-Ag-Cu焊料互连组织及剪切强度的影响[J]. 金属学报, 2019, 55(12): 1606-1614.
[7] 何贤美, 童六牛, 高成, 王毅超. Nd含量对磁控溅射Si(111)/Cr/Nd-Co/Cr薄膜结构与磁性的影响[J]. 金属学报, 2019, 55(10): 1349-1358.
[8] 张敏, 慕二龙, 王晓伟, 韩挺, 罗海龙. TA1/Cu/X65复合板焊接接头微观组织及力学性能[J]. 金属学报, 2018, 54(7): 1068-1076.
[9] 康慧君, 李金玲, 王同敏, 郭景杰. 定向凝固Al-Mn-Be合金初生金属间化合物相生长行为及力学性能[J]. 金属学报, 2018, 54(5): 809-823.
[10] 耿林, 吴昊, 崔喜平, 范国华. 基于箔材反应退火合成的TiAl基复合材料板材研究进展[J]. 金属学报, 2018, 54(11): 1625-1636.
[11] 于宣, 张志豪, 谢建新. 不同Ce含量Fe-6.5%Si合金的组织、有序结构和中温拉伸塑性[J]. 金属学报, 2017, 53(8): 927-936.
[12] 赵宁,邓建峰,钟毅,殷录桥. 热迁移下Ni/Sn-xCu/Ni微焊点钎焊界面金属间化合物的演变[J]. 金属学报, 2017, 53(7): 861-868.
[13] 张志杰,黄明亮. Cu/Sn-52In/Cu微焊点液-固电迁移行为研究[J]. 金属学报, 2017, 53(5): 592-600.
[14] 王大伟,修世超. 焊接温度对碳钢/奥氏体不锈钢扩散焊接头界面组织及性能的影响[J]. 金属学报, 2017, 53(5): 567-574.
[15] 周丽,崔超,贾清,马英石. γ-TiAl金属间化合物铣削加工实验与有限元模拟[J]. 金属学报, 2017, 53(4): 505-512.