Please wait a minute...
金属学报  2004, Vol. 40 Issue (6): 613-    
  论文 本期目录 | 过刊浏览 |
磷对Ni3Al凝固组织的影响
孟晓娜 孙文儒 郭守仁 卢德忠 李 娜
中国科学院金属研究所; 沈阳 110016
Effect Of Phosphorus On Cast Microstructure Of Ni3Al
MENG Xiaona; SUN Wenru; GUO Shouren; LU Dezhong; LI Na
Institute of Metal Research; The Chinese Academy of Sciences; Shenyang 110016
引用本文:

孟晓娜; 孙文儒; 郭守仁; 卢德忠; 李娜 . 磷对Ni3Al凝固组织的影响[J]. 金属学报, 2004, 40(6): 613-.
, , , , . Effect Of Phosphorus On Cast Microstructure Of Ni3Al[J]. Acta Metall Sin, 2004, 40(6): 613-.

全文: PDF(12485 KB)  
摘要: 磷(P)在Ni3Al中的溶解度很低, 凝固过程中向剩余液体中偏聚, 最终在晶界上析出富P相. 凝固后期, P在剩余液体中的偏聚程度升高, 降低形核率, 抑制试样心部等轴晶的形成, 促使试样外缘晶粒向心部延伸生长,增加柱状晶长度. P降低合金终凝温度, 增加糊状区长度, 阻碍液相补缩,增加形成疏松的倾向. P产生上述作用的根本原因是其降低固、液两相体积自由能差和原子跃迁穿过液/固界面的激活能.
关键词 Ni3Al凝固偏聚    
Abstract:Phosphorus is hardly dissolved in the solidified Ni3Al solids,and tends to be segregated in the residual liquids of Ni3Al. The phosphorus--bearing phase is precipitated at the end of solidification. The segregation of phosphorus in the residual liquids inhibits the nucleation of Ni3Al grains and the formation of the equiaxed grains at the central part of the sample, and favors the growth of the columnar grains towards the central part of the sample. The reason for phosphorus to decrease the nucleation rate of Ni3Al is that it lowers the difference of free energy between solids and liquids, and increases the activation energy for the atoms to transit through the liquid/solid interface. Phosphorus lowers the final solidification temperature of Ni3Al, increases the length of mushy zone, inhibits the feeding of casting, and hence increases the tendency of micropores formation.
Key wordsphosphorus    solidification    segregation
收稿日期: 2003-05-27     
ZTFLH:  TG113.1  
[1] Khitouni M, Kolsi A W, Njah N. Ann Chim-Sci Mat,2003; 28(5) : 17
[2] Khitouni M, Njah N, Gilbon D. Scr Mater, 2004; 50 (1) :77
[3] Li Y F, Guo J T, Zhou L Z, Ye H Q. Acta Metall Sin,2003; 39: 821(李玉芳, 郭建亭, 周兰章, 叶恒强.金属学报,2003;39:821)
[4] Hu Z Q, Sun W R, Guo S R. Acta Metall Sin (Eng Lett),1996; 9: 443
[5] Hu Z Q, Sun W R, Guo S R, Lu D Z. Chin J Nonferrous Met, 2001; 11: 947(胡壮麒,孙文儒,郭守仁,卢德忠. 中国有色金属学报,2001;11: 947)
[6] Turnbull D. J Appl Phys, 1950; 21: 1022
[7] Cao W D, Kennedy R L. In: Loria E A ed, Superalloys 718, 625, 706 and Various Derivatives. Warrendale,Pennsylvania: TMS, 2001; 455E
[1] 张健, 王莉, 谢光, 王栋, 申健, 卢玉章, 黄亚奇, 李亚微. 镍基单晶高温合金的研发进展[J]. 金属学报, 2023, 59(9): 1109-1124.
[2] 马德新, 赵运兴, 徐维台, 王富. 重力对高温合金定向凝固组织的影响[J]. 金属学报, 2023, 59(9): 1279-1290.
[3] 侯娟, 代斌斌, 闵师领, 刘慧, 蒋梦蕾, 杨帆. 尺寸设计对选区激光熔化304L不锈钢显微组织与性能的影响[J]. 金属学报, 2023, 59(5): 623-635.
[4] 刘继浩, 周健, 武会宾, 马党参, 徐辉霞, 马志俊. 喷射成形M3高速钢偏析成因及凝固机理[J]. 金属学报, 2023, 59(5): 599-610.
[5] 苏震奇, 张丛江, 袁笑坦, 胡兴金, 芦可可, 任维丽, 丁彪, 郑天祥, 沈喆, 钟云波, 王晖, 王秋良. 纵向静磁场下单晶高温合金定向凝固籽晶回熔界面杂晶的形成与演化[J]. 金属学报, 2023, 59(12): 1568-1580.
[6] 段慧超, 王春阳, 叶恒强, 杜奎. 纳米多孔金属表面结构与成分的三维电子层析表征[J]. 金属学报, 2023, 59(10): 1291-1298.
[7] 梁琛, 王小娟, 王海鹏. 快速凝固Ti-Al-Nb合金B2相形成机制与显微力学性能[J]. 金属学报, 2022, 58(9): 1169-1178.
[8] 李闪闪, 陈云, 巩桐兆, 陈星秋, 傅排先, 李殿中. 冷速对高碳铬轴承钢液析碳化物凝固析出机制的影响[J]. 金属学报, 2022, 58(8): 1024-1034.
[9] 刘仁慈, 王鹏, 曹如心, 倪明杰, 刘冬, 崔玉友, 杨锐. 700℃热暴露对 β 凝固 γ-TiAl合金表面组织及形貌的影响[J]. 金属学报, 2022, 58(8): 1003-1012.
[10] 李彦强, 赵九洲, 江鸿翔, 何杰. Pb-Al合金定向凝固组织形成过程[J]. 金属学报, 2022, 58(8): 1072-1082.
[11] 郭东伟, 郭坤辉, 张福利, 张飞, 曹江海, 侯自兵. 基于二次枝晶间距变化特征的连铸方坯CET位置判断新方法[J]. 金属学报, 2022, 58(6): 827-836.
[12] 吴国华, 童鑫, 蒋锐, 丁文江. 铸造Mg-RE合金晶粒细化行为研究现状与展望[J]. 金属学报, 2022, 58(4): 385-399.
[13] 丁宗业, 胡侨丹, 卢温泉, 李建国. 基于同步辐射X射线成像液/固复层界面氢气泡的形核、生长演变与运动行为的原位研究[J]. 金属学报, 2022, 58(4): 567-580.
[14] 张雷, 施韬, 黄火根, 张培, 张鹏国, 吴敏, 法涛. 铀基非晶复合材料的相分离与凝固序列研究[J]. 金属学报, 2022, 58(2): 225-230.
[15] 陈瑞润, 陈德志, 王琪, 王墅, 周哲丞, 丁宏升, 傅恒志. Nb-Si基超高温合金及其定向凝固工艺的研究进展[J]. 金属学报, 2021, 57(9): 1141-1154.