Please wait a minute...
金属学报  1997, Vol. 33 Issue (4): 345-351    
  论文 本期目录 | 过刊浏览 |
多晶纯镍中氢致缺陷及其回复行为
赵法如;王宝义;童志琛;王天民
兰州大学;兰州;730000;兰州大学;兰州;730000;上海机械工程学院;上海;200040;兰州大学;兰州;730000;中国科学院兰州化学物理研究所;兰州;730000
HYDROGEN INDUCED-IN DEFECT AND RECOVERY BEHAVIOUR IN POLYCRYSTALLINE NICKEL
ZHAO Faru; WANG Baoyi (Lanzhou University; Lanzhou 730000); TONG Zhichen (Shanghai Mechanical Engineering Collnge; Shanghai 200040); WANG Tianmin (Lanzhou University; Lanzhou 730000;Lanzhou Institute of Chemistry-Physics;Chinese Academy of Sciences; Lanzhou 730000)(Manuscript received 1996-05-10; in revised form 1996-1 1-27)
引用本文:

赵法如;王宝义;童志琛;王天民. 多晶纯镍中氢致缺陷及其回复行为[J]. 金属学报, 1997, 33(4): 345-351.
, , , . HYDROGEN INDUCED-IN DEFECT AND RECOVERY BEHAVIOUR IN POLYCRYSTALLINE NICKEL[J]. Acta Metall Sin, 1997, 33(4): 345-351.

全文: PDF(643 KB)  
摘要: 采用正电子湮没方法研究了充分退火与塑性变形多晶纯镍中阴极充氢产生的微观缺陷及其回复行为。实验结果表明,空位的迁移激活能Em=0.96±0.05eV、电解充氢后充分退火和塑性变形纯镍的线性参数S和平均寿命均有显著上升。氢致缺陷的种类与充氢前样品的状态有关,充分退火态试样除产生一定数量的空位和位错外,还产生了相当数量在923K以上仍不能回复的微空洞甚至微裂纹等大尺寸缺陷,而形变试样充氢后主要是位错和空位以及空位团。未发现微空洞等亚微观缺陷的存在。
关键词 正电子湮没技术多品纯镍微观缺陷    
Abstract:Specimens made of fully annealed or plastically deformed polycrystalline nickel are hydrogen charged. The properties and recovery behaviour of the hydrogen induced defects are studied by means of positron annihilation. The measured activation energy for migration of a vacancy is 0.96±0.05 eV. The results showed that both for the fully annealed and plastically deformed polycrystalline nickel, the parameter S and the average lifetime will increase sharply when the specimens were hydrogen charged. The type of the hydrogen charged defects depends on the state of the specimen before charging, in a fully annealed specimen, except some of vacancies and dislocations, the main hydrogen charged defects are the micro voids or the micro cracks, which can not be recovered at above 650℃. Compared with the annealed samples, the hydrogen induced defects are mainly vacancies, dislocations and vacancy clusters, and the microvoids was not found in the deformed nickel specimen.
Key wordshydrogen charging    positron annihilation    polycrystalline nickel    micro defect
收稿日期: 1997-04-18     
基金资助:国家自然科学基金
1Wert C A.In:Alfeld G,Volkl J eds,Hydrogen in Metals.Heidelberg:Springer-Verlag,1978:305
2藤田英一.金属中水素,日本金属学会会报,1979;18(9):613
3Lee S M,Lee J Y.Metall Trans,1986;17A:181
4Szdes C,Lang G,Kajcsos Z.Mater Sci Forum,1992;105-110:1261
5Lee J L,Lee J Y.Ser Metall,1985;19:341
6吴奕初,田中卓.常香荣,肖纪美。物理学报,1991;40(11):1883
7Khanna S K,Sonnenberg K.Radiat Eff, 1981;59:91
8Dlubek G,Brummer O,Hensel E.Phys Status Solidi,1976;34A:737
9Siegel R W,In:Takamura J I,Doyama M,Kiritani M eds,Point Defects and Defect Interactions inMetals.Tokyo:University of Tokyo Press,1982:533
10王天民.核技术,1987;4:7
11Pajak J,Rozenfeld B.In:Jain P C,Singru R M,Gopinathan K P eds.,Positron Annihilation,Singapore:World Scientific Publ Co,1985:558
12Segers D,Humbeeck J V,Delaey L, Dorikens M.In:Jain P C,Singru R M,Gopinathan K P eds.,Positron Annihilation,Singapore:World Scientific Publ Co,1985:880
13高飞,赖文生,王天民。兰州大学学报(自然科学版),1993;29(1):54
14Wang B Y,Gu Q,Wang Y X,Wang T M. J Phys. F,to be published
15冯端。金属物理学(第一卷:结构与缺陷)北京:科学出版社,1987:308
16Trumpy G,Bentzon M. Mater Sci Forum,1992;105-110:1293
[1] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[2] 杜宗罡, 徐涛, 李宁, 李文生, 邢钢, 巨璐, 赵利华, 吴华, 田育成. Ni-Ir/Al2O3 负载型催化剂的制备及其用于水合肼分解制氢性能[J]. 金属学报, 2023, 59(10): 1335-1345.
[3] 丁宗业, 胡侨丹, 卢温泉, 李建国. 基于同步辐射X射线成像液/固复层界面氢气泡的形核、生长演变与运动行为的原位研究[J]. 金属学报, 2022, 58(4): 567-580.
[4] 肖娜, 惠卫军, 张永健, 赵晓丽. 真空渗碳处理齿轮钢的氢脆敏感性[J]. 金属学报, 2021, 57(8): 977-988.
[5] 安旭东, 朱特, 王茜茜, 宋亚敏, 刘进洋, 张鹏, 张钊宽, 万明攀, 曹兴忠. 奥氏体316不锈钢中位错与氢的相互作用机理[J]. 金属学报, 2021, 57(7): 913-920.
[6] 兰亮云, 孔祥伟, 邱春林, 杜林秀. 基于多尺度力学实验的氢脆现象的最新研究进展[J]. 金属学报, 2021, 57(7): 845-859.
[7] 朱敏, 欧阳柳章. 镁基储氢合金动力学调控及电化学性能[J]. 金属学报, 2021, 57(11): 1416-1428.
[8] 盛鹰, 贾彬, 王汝恒, 陈国平. 一种原子尺度应变定义方法及其在识别微观缺陷演化中的应用[J]. 金属学报, 2020, 56(8): 1144-1154.
[9] 李金许,王伟,周耀,刘神光,付豪,王正,阚博. 汽车用先进高强钢的氢脆研究进展[J]. 金属学报, 2020, 56(4): 444-458.
[10] 刘振宝,梁剑雄,苏杰,王晓辉,孙永庆,王长军,杨志勇. 高强度不锈钢的研究及发展现状[J]. 金属学报, 2020, 56(4): 549-557.
[11] 杨柯,史显波,严伟,曾云鹏,单以银,任毅. 新型含Cu管线钢——提高管线耐微生物腐蚀性能的新途径[J]. 金属学报, 2020, 56(4): 385-399.
[12] 董福涛,薛飞,田亚强,陈连生,杜林秀,刘相华. 退火温度对TWIP钢组织性能和氢致脆性的影响[J]. 金属学报, 2019, 55(6): 792-800.
[13] 张体明, 赵卫民, 蒋伟, 王永霖, 杨敏. X80钢焊接残余应力耦合接头组织不均匀下氢扩散的数值模拟[J]. 金属学报, 2019, 55(2): 258-266.
[14] 丘玉萍, 戴豪, 戴洪斌, 王平. 适于水合肼分解制氢的Ni-Pt/CeO2催化剂的表面组分调控[J]. 金属学报, 2018, 54(9): 1289-1296.
[15] 王帅鹏, 罗文华, 李赣, 李海波, 张广丰. La含量对Ce-La合金氢化动力学的影响[J]. 金属学报, 2018, 54(8): 1187-1192.