Please wait a minute...
金属学报  1996, Vol. 32 Issue (8): 785-790    
  论文 本期目录 | 过刊浏览 |
共析转变过程中内耗与复模量行为的对比
刘军民;张进修
中山大学
BHAVIOUR OF COMPLEX ELASTIC MODULUS AND INTERNAL FRICTION DURING EUTECTOID DECOMPOSITION
LIU Junmin; ZHANG Jinxiu (Zhongshan University; Guangzhou 510275)(Manuscript received 1995-08-09; in revised form 1996-04-11)
引用本文:

刘军民;张进修. 共析转变过程中内耗与复模量行为的对比[J]. 金属学报, 1996, 32(8): 785-790.
, . BHAVIOUR OF COMPLEX ELASTIC MODULUS AND INTERNAL FRICTION DURING EUTECTOID DECOMPOSITION[J]. Acta Metall Sin, 1996, 32(8): 785-790.

全文: PDF(457 KB)  
摘要: 通过系统地改变振动频率和变温速率,用低频强迫振动模式,测量了Zn-22%Al合金的动态力学性能(实模量、虚模量和内耗),观测到共析转变时具有典型一级相变特征的内耗峰;结合实验结果,从复模量的实部(M_1)和虚部(M_2)随振动频率和变温速率的变化关系出发,讨论了界面的稳定性和低频相变内耗的特征.
关键词 内耗复模量共析转变力学性质界面Zn-Al合金    
Abstract:The dynamically mechanical properties of Zn-22%Al alloys were measured with the low-frequency forced vibration mode by systematically changing the temperature varing rate and vibration frequency during eutectoid decomposition process. The experimental results indicated that the loss elastic modulus had different temperature varying rate and vibration frequency dependent behaviour from the storage elastic modulus, and the dependence of internal friction on temperature varying rate and vibration frequency has been discussed in the viewpoint of the complex elastic modulus. To analyse the complex elastic modulus may be more helpful to study the first-order phase transition than to only analyse internal friction.
Key words internal friction    complex elastic modulus    eutectoid decomposition    mechanical property    interface    Zn-Al alloy Correspondent LIU Junmin    (Department of Physics    Zhongshan University    Guangzhou 510275)
收稿日期: 1996-08-18     
基金资助:中国科学院固体物理研究所固体缺陷与内耗开放实验室资助项目
1ZhangJX,PungPCW,ZengWG.PhysRev,1995;B52:268ZhangJX,YangZY,FungPCW.PhysRev,1995;B52:2782DelormeJF,SchidR,RobinR,GobinP.JPhysColloq,1971;32(C2):1013DejongheW,BatistDR,DeleayL.ScrMetall,1976;10:11254王业宁,杨正举,祝和,马进超.南京大学学报(自然科学版),1963;2:15马应良,葛庭燧.物理学报,1963;20:7216张进修,罗来忠.物理学报,1988;37:353,3637WangYN,ChenXiaohua,ShenHuimin.In:KeTSed.,ProcIntConfonInternalFrictionandUltrasonicAttenuationinSolids,Beijing:AcademicPublishers,1989:3058BidauxJE,SchalierR,BenoitW.ActaMetall,1989;37:8039LiuHY,JonesH.ActaMetallMater,1992;40:200310NuttalK.JInstMet,1971;99:26611TorisakaY,KojimaS.ActaMetallMater,1991;39:94712刘军民,张进修.物理学报,待发表13NowickAS,BerryBS.AnelasticRelaxationinCrystallineSolids.NewYork:AcademicPress,1972:24714HermidaEB.PhysStatusSolidi,1993;B178:371
[1] 宫声凯, 刘原, 耿粒伦, 茹毅, 赵文月, 裴延玲, 李树索. 涂层/高温合金界面行为及调控研究进展[J]. 金属学报, 2023, 59(9): 1097-1108.
[2] 王宗谱, 王卫国, Rohrer Gregory S, 陈松, 洪丽华, 林燕, 冯小铮, 任帅, 周邦新. 不同温度轧制Al-Zn-Mg-Cu合金再结晶后的{111}/{111}近奇异晶界[J]. 金属学报, 2023, 59(7): 947-960.
[3] 王福容, 张永梅, 柏国宁, 郭庆伟, 赵宇宏. Al掺杂Mg/Mg2Sn合金界面的第一性原理计算[J]. 金属学报, 2023, 59(6): 812-820.
[4] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[5] 夏大海, 计元元, 毛英畅, 邓成满, 祝钰, 胡文彬. 2024铝合金在模拟动态海水/大气界面环境中的局部腐蚀机制[J]. 金属学报, 2023, 59(2): 297-308.
[6] 周小宾, 赵占山, 汪万行, 徐建国, 岳强. 渣-金界面气泡夹带行为数值物理模拟[J]. 金属学报, 2023, 59(11): 1523-1532.
[7] 沈莹莹, 张国兴, 贾清, 王玉敏, 崔玉友, 杨锐. SiCf/TiAl复合材料界面反应及热稳定性[J]. 金属学报, 2022, 58(9): 1150-1158.
[8] 宋庆忠, 潜坤, 舒磊, 陈波, 马颖澈, 刘奎. 镍基高温合金K417G与氧化物耐火材料的界面反应[J]. 金属学报, 2022, 58(7): 868-882.
[9] 郑士建, 闫哲, 孔祥飞, 张瑞丰. 纳米金属层状材料强塑性的界面调控[J]. 金属学报, 2022, 58(6): 709-725.
[10] 丁宗业, 胡侨丹, 卢温泉, 李建国. 基于同步辐射X射线成像液/固复层界面氢气泡的形核、生长演变与运动行为的原位研究[J]. 金属学报, 2022, 58(4): 567-580.
[11] 卢磊, 赵怀智. 异质纳米结构金属强化韧化机理研究进展[J]. 金属学报, 2022, 58(11): 1360-1370.
[12] 王硕, 王俊升. Al-Li合金中 δ′/θ′/δ复合沉淀相结构演化及稳定性的第一性原理探究[J]. 金属学报, 2022, 58(10): 1325-1333.
[13] 赵宇宏, 景舰辉, 陈利文, 徐芳泓, 侯华. 装甲防护陶瓷-金属叠层复合材料界面研究进展[J]. 金属学报, 2021, 57(9): 1107-1125.
[14] 胡标, 张华清, 张金, 杨明军, 杜勇, 赵冬冬. 界面热力学与晶界相图的研究进展[J]. 金属学报, 2021, 57(9): 1199-1214.
[15] 邱龙时, 赵婧, 潘晓龙, 田丰. 高速钢表面TiN薄膜的界面疲劳剥落行为[J]. 金属学报, 2021, 57(8): 1039-1047.