Acta Metall Sin  1998, Vol. 34 Issue (2): 159-163    DOI:

Current Issue | Archive | Adv Search |

THE OXIDATION OF A TWO-PHASE Cu-50Cr ALLOY IN AIR AT 70O ─900℃

FU Guannyan;NIU Yan;WU Weitao (State Key Laboratory for Corrosion and Protection; Institute of Corrosion and Protection of Metals; The Chinese Academy of Sciences; Weucui Road 62; Shengyang 110015)(Department of Chemical Engineering and mechinery; Shenyang Institute of Chemical Technology; Shenyang110021)

FU Guannyan;NIU Yan;WU Weitao (State Key Laboratory for Corrosion and Protection; Institute of Corrosion and Protection of Metals; The Chinese Academy of Sciences; Weucui Road 62; Shengyang 110015)(Department of Chemical Engineering and mechinery; Shenyang Institute of Chemical Technology; Shenyang110021). THE OXIDATION OF A TWO-PHASE Cu-50Cr ALLOY IN AIR AT 70O ─900℃. Acta Metall Sin, 1998, 34(2): 159-163.

Abstract References Related Articles Recommended Metrics Download:  PDF(2444KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The two-phase Cu-50Cr alloy in air at 70─900℃ was corroded nearly parabolically, except at 900℃ when the instataneous parabolic rate constat decreased with time. The scales were consisted of an outer layer of copper oxide and an inner layer of a copper oxide or double oxide Cu2Cr2O4, in which the particles of chromiumare surrounded by chromia and the double Oxide Cu2Cr2O4. A nearly continuous Cr2O3 layer only appears at interface between the scale and matrix at 900℃. The formation of a continuous outer layer of chromia was more difficult on two-phase M-Cr alloy than single-phase M-Cr alloy. Key words:  Copper-Chromium two-phase alloy      oxidation      Received:  18 February 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I2/159 1Gesmundo F, Viani F, Niu Y. Oxid Met 1994; 42: 409 2 Gesmundo F, Viani F, Niu Y, Donglass D L. Oxid Met, 1993; 40: 373 3Gesmundo F, Viani F, Niu Y, Donglass D L.Oxid Met, 1994; 42: 465 4Gesmundo F, Vianid F, Niu Y. Oxid Met, 1996; 45: 51 5Kofastad R High Temperature Corrosion ,London and New York: Elsevier Applied Science, 1988: 389 6Chakrabarti D J,Laughlin D E. Bull Alloy Phase Diagrams,1984;5:59 7Gesmundo F, Viani F, Niu Y, Donglass D L. Oxid Met 1993; 39: 197 [1] HUANG Ding, QIAO Yanxin, YANG Lanlan, WANG Jinlong, CHEN Minghui, ZHU Shenglong, WANG Fuhui. Effect of Shot Peening of Substrate Surface on Cyclic Oxidation Behavior of Sputtered Nanocrystalline Coating[J]. 金属学报, 2023, 59(5): 668-678. [2] SHEN Zhao, WANG Zhipeng, HU Bo, LI Dejiang, ZENG Xiaoqin, DING Wenjiang. Research Progress on the Mechanisms Controlling High-Temperature Oxidation Resistance of Mg Alloys[J]. 金属学报, 2023, 59(3): 371-386. [3] LIU Laidi, DING Biao, REN Weili, ZHONG Yunbo, WANG Hui, WANG Qiuliang. Multilayer Structure of DZ445 Ni-Based Superalloy Formed by Long Time Oxidation at High Temperature[J]. 金属学报, 2023, 59(3): 387-398. [4] LI Xin, JIANG He, YAO Zhihao, DONG Jianxin. Theoretical Calculation and Analysis of the Effect of Oxygen Atom on the Grain Boundary of Superalloy Matrices Ni, Co and NiCr[J]. 金属学报, 2023, 59(2): 309-318. [5] XU Wenguo, HAO Wenjiang, LI Yingju, ZHAO Qingbin, LU Bingyu, GUO Heyi, LIU Tianyu, FENG Xiaohui, YANG Yuansheng. Effects of Trace Aluminum and Titanium on High Temper-ature Oxidation Behavior of Inconel 690 Alloy[J]. 金属学报, 2023, 59(12): 1547-1558. [6] JIN Xinyan, CHU Shuangjie, PENG Jun, HU Guangkui. Effect of Dew Point on Selective Oxidation and Decarburization of 0.2%C-1.5%Si-2.5%Mn High Strength Steel Sheet During Continuous Annealing[J]. 金属学报, 2023, 59(10): 1324-1334. [7] HU Min, ZHOU Shengyu, GUO Jingyuan, HU Minghao, LI Chong, LI Huijun, WANG Zumin, LIU Yongchang. Oxidation Behavior of Micro-Regions in Multiphase Ni3Al-Based Superalloys[J]. 金属学报, 2023, 59(10): 1346-1354. [8] CONG Hongda, WANG Jinlong, WANG Cheng, NING Shen, GAO Ruoheng, DU Yao, CHEN Minghui, ZHU Shenglong, WANG Fuhui. A New Design Inorganic Silicate Composite Coating and Its Oxidation Behavior at High Temperature in Steam Atmosphere[J]. 金属学报, 2022, 58(8): 1083-1092. [9] XIE Leipeng, SUN Wenyao, CHEN Minghui, WANG Jinlong, WANG Fuhui. Effects of Processing on Microstructures and Properties of FGH4097 Superalloy[J]. 金属学报, 2022, 58(8): 992-1002. [10] ZHAO Xiaofeng, LI Ling, ZHANG Han, LU Jie. Research Progress in High-Entropy Alloy Bond Coat Material for Thermal Barrier Coatings[J]. 金属学报, 2022, 58(4): 503-512. [11] SU Kaixin, ZHANG Jiwang, ZHANG Yanbin, YAN Tao, LI Hang, JI Dongdong. High-Cycle Fatigue Properties and Residual Stress Relaxation Mechanism of Micro-Arc Oxidation 6082-T6 Aluminum Alloy[J]. 金属学报, 2022, 58(3): 334-344. [12] PENG Jun, JIN Xinyan, ZHONG Yong, WANG Li. Influence of Substrate Surface Structure on the Galvanizability of Fe-16Mn-0.7C-1.5Al TWIP Steel Sheet[J]. 金属学报, 2022, 58(12): 1600-1610. [13] CAO Chao, JIANG Chengyang, LU Jintao, CHEN Minghui, GENG Shujiang, WANG Fuhui. Corrosion Behavior of Austenitic Stainless Steel with Different Cr Contents in 700oC Coal Ash/High Sulfur Flue-Gas Environment[J]. 金属学报, 2022, 58(1): 67-74. [14] CHEN Shenghu, RONG Lijian. Oxide Scale Formation on Ultrafine-Grained Ferritic-Martensitic Steel During Pre-Oxidation and Its Effect on the Corrosion Performance in Stagnant Liquid Pb-Bi Eutectic[J]. 金属学报, 2021, 57(8): 989-999. [15] PI Huilong, SHI Xiaolei, XU Xingxiang. Effect of SiC-ZrC Coating Prepared by SiZr Liquid Phase Sintering on the Oxidation Resistance of C/SiC Composites[J]. 金属学报, 2021, 57(6): 791-796. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed