Acta Metall Sin  2008, Vol. 44 Issue (9): 1116-1124     DOI:

Research Articles Current Issue | Archive | Adv Search |

CORROSION BEHAVIOR AND VARIATION OF APPARENT MECHANICAL PROPERTY OF ONE NEWLY-DEVELOPED LOW CARBON BAINITIC STEEL IN ENVIRONMENT CONTAINING CHLORIDE ION

Shu-Tao WANG;;Kewei GAO;;

北京科技大学

Shu-Tao WANG; Kewei GAO. CORROSION BEHAVIOR AND VARIATION OF APPARENT MECHANICAL PROPERTY OF ONE NEWLY-DEVELOPED LOW CARBON BAINITIC STEEL IN ENVIRONMENT CONTAINING CHLORIDE ION. Acta Metall Sin, 2008, 44(9): 1116-1124 .

Abstract References Related Articles Recommended Metrics Download:  PDF(2740KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The corrosion resistance of one newly-developed low carbon bainitic steel, ultra-low carbon ferritic steel and 09CuPCrNi steel was researched in environment containing chloride ions through alternate wet-dry accelerated corrosion test. The bainitic steel possesses both excellent mechanical property and excellent corrosion resistance. The corrosion rate of the bainitic steel was obviously lower than that of the other two steels and the gap increased with corrosion time. The phase constituents of the rust layers of the three kinds of steel were similar, while corrosion products of the bainitic steel were finest and most compact. The enrichment of Cr and Cu in the rust layer near the matrix of the bainitic steel was most obvious, while the content of chloride was lowest in the same location. The ability of rust layer in the bainitic steel to block permeation of chloride ion was higher than that of the two other steel. Key words:  newly-developed low carbon bainitic steel      environment containing chloride ion      corrosion resistance       Received:  17 December 2007      ZTFLH:  TG172.3   Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors Shu-Tao WANG Kewei GAO URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2008/V44/I9/1116 [1]Yang D J,Shen Z S.Metal Corrosion.2nd Ed.,Beijing: Metallurgical Industry Press,1999:216 (杨德钧，沈卓身．金属腐蚀学．第2版，北京：冶金工业出版社，1999：216) [2]General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China.GB/T 4171 2000,Beijing:Standards Press of China,2000 (国家技术监督局．GB/T4171-2000，北京：中国标准出版社，2000) [3]Wang X M,Shang C J,Yang S W,He X L.Acta Metall Sin,2002;38:661 (王学敏，尚成嘉，杨善武，贺信莱．金属学报，2002：38：661) [4]Shang C J,Wang X M,Yang S W,He X L,Wu H B.Acta Metall Sin,2003;39:1019 (尚成嘉，王学敏．杨善武，贺信莱，武会宾．金属学报，2003；39：1019) [5]Weng Y Q.The Ultra-Fine Crystal Steel.Beijing:Metal- lurgical Industry Press,2003:279 (翁宇庆．超细晶钢．北京：冶金工业出版社，2003：279) [6]Zhao Z Y.The Design of Alloy Steel.Beijing:National Defence Industry Press,1999:106 (赵振业．合金钢设计．北京：国防工业出版社，1999：106) [7]The American Society for Testing and Materials.ASTM G 44-99,1999 [8]The American Society for Testing and Materials.ASTM E 8M-03,2003 [9]Chen Y Y,Tzeng H J,Wei L I,Wang L H,Oung J C, Shih H C.Corros Sci,2005;47:1001 [10]Kamimura T,Hara S,Miyuki H,Yamashita M,Uchida H. Corros Sci,2006;48:2799 [11]Nishimura T,Katayama H,Noda K,Kodama T.Corro- sion,2000;56:935 [12]Bousselmi L,Fiaud C,Tribollet B,Triki E.Corros Sci, 1997;39:1711 [13]Bousselmi L,Fiaud C,Tribollet B,Trim E.Electrochim Acta,1999;44:4357 [14]Santana Rodrfguez J J,Santana Hernández F J,González J E.Corros Sci,2002;44:2597 [15]The General Edit Committee of the Steel Material Hand- book.The Steel Material Handbook,Vol.2:Low Alloy High Strength Steel.Beijing:Standards Press of China, 2003:32 (《钢铁材料手册》总编辑委员会．钢铁材料手册，第2卷：低合金高强度钢．北京：中国标准出版社，2003：32) [16]Huang J Z,Zuo Y.Material Corrosion Resistance and Corrosion Data.Beijing:Chemical Industry Press,2003: 84 (黄建中，左禹．材料耐蚀性和腐蚀数据．北京：化学工业出版社，2003：84) [17]Chen X H,Dong J H,Han E H,Ke W.Mater Lett,2007; 61:4050 [18]Xu N X,Zhao L Y,Ding C H,Zhang C D,Li R S,Zhong Q D.Corros Sci,2002;44:163 [19]Li B,Weng Y J,Li X Y.Electrochern Commun,2005;7: 1033 [20]ZhangQC,WuJS,WangJ J,Zheng W L,Chen J G,Li A B.Mater Chern Phys,2002;77:603 [21]Yamashita M,Miyuki H,Mastsuda Y,Nagano H,Misawa T.Corros Sci,1994;36:283 [22]Mizoguchi T,Ishii Y,Okada T,Kimura M,Kihira H.Cot- ros Sci,2005;47:2477 [23]Yang D J,Shen Z S.Metal Corrosion.2nd Ed.,Beijing: Metallurgical Industry Press,1999:293 (杨德钧，沈卓身金属腐蚀学．第2版，北京：冶金工业出版社，1999：293) [24]Yu F Z.Corrosion Resistance of Metal Materials.Beijing: Science Press,1982:21 (于福洲．金属材料的耐腐蚀性．北京：科学出版社，1982：21) [1] SI Yongli, XUE Jintao, WANG Xingfu, LIANG Juhua, SHI Zimu, HAN Fusheng. Effect of Cr Addition on the Corrosion Behavior of Twinning-Induced Plasticity Steel[J]. 金属学报, 2023, 59(7): 905-914. [2] XU Linjie, LIU Hui, REN Ling, YANG Ke. Effect of Cu on In-Stent Restenosis and Corrosion Resistance of Ni-Ti Alloy[J]. 金属学报, 2023, 59(4): 577-584. [3] ZHAO Xiaofeng, LI Ling, ZHANG Han, LU Jie. Research Progress in High-Entropy Alloy Bond Coat Material for Thermal Barrier Coatings[J]. 金属学报, 2022, 58(4): 503-512. [4] HUANG Yichuan, WANG Qing, ZHANG Shuang, DONG Chuang, WU Aimin, LIN Guoqiang. Optimization of Stainless Steel Composition for Fuel Cell Bipolar Plates[J]. 金属学报, 2021, 57(5): 651-664. [5] ZHU Wenting, CUI Junjun, CHEN Zhenye, FENG Yang, ZHAO Yang, CHEN Liqing. Design and Performance of 690 MPa Grade Low-Carbon Microalloyed Construction Structural Steel with High Strength and Toughness[J]. 金属学报, 2021, 57(3): 340-352. [6] WANG Xuemei, YIN Zhengzheng, YU Xiaotong, ZOU Yuhong, ZENG Rongchang. Comparison of Corrosion Resistance of Phenylalanine, Methionine, and Asparagine-Induced Ca-P Coatings on AZ31 Magnesium Alloys[J]. 金属学报, 2021, 57(10): 1258-1271. [7] CHEN Yongjun, BAI Yan, DONG Chuang, XIE Zhiwen, YAN Feng, WU Di. Passivation Behavior on the Surface of Stainless Steel Reinforced by Quasicrystal-Abrasive via Finite Element Simulation[J]. 金属学报, 2020, 56(6): 909-918. [8] Lin WEI,Zhijun WANG,Qingfeng WU,Xuliang SHANG,Junjie LI,Jincheng WANG. Effect of Mo Element and Heat Treatment on Corrosion Resistance of Ni2CrFeMox High-Entropy Alloyin NaCl Solution[J]. 金属学报, 2019, 55(7): 840-848. [9] Xiubing LIANG, Jianwen FAN, Zhibin ZHANG, Yongxiong CHEN. Microstructure and Corrosion Properties of Aluminum Base Amorphous and Nanocrystalline Composite Coating[J]. 金属学报, 2018, 54(8): 1193-1203. [10] Li FAN, Haiyan CHEN, Yaohua DONG, Xueying LI, Lihua DONG, Yansheng YIN. Corrosion Behavior of Fe-Based Laser Cladding Coating in Hydrochloric Acid Solutions[J]. 金属学报, 2018, 54(7): 1019-1030. [11] Haiou YANG, Xuliang SHANG, Lilin WANG, Zhijun WANG, Jincheng WANG, Xin LIN. Effect of Constituent Elements on the Corrosion Resistance of Single-Phase CoCrFeNi High-Entropy Alloys in NaCl Solution[J]. 金属学报, 2018, 54(6): 905-910. [12] Ke YANG, Mengchao U, Jialong AN, Wei NG. Research and Development of Maraging Stainless Steel Used for New Generation Landing Gear[J]. 金属学报, 2018, 54(11): 1567-1585. [13] Erlin ZHANG, Xiaoyan WANG, Yong HAN. Research Status of Biomedical Porous Ti and Its Alloy in China[J]. 金属学报, 2017, 53(12): 1555-1567. [14] Muqin LI, Haitao YAO, Fanghong WEI, Mingda LIU, Zan WANG, Shuhao PENG. The Microstructure and in Vivo and in Vitro Property of Multi-Component Composite Films on the Biomedical Pure Magnesium Surface[J]. 金属学报, 2017, 53(10): 1337-1346. [15] Chao XIA, Shi QIAN, Donghui WANG, Xuanyong LIU. Properties of Carbon Ion Implanted Biomedical Titanium[J]. 金属学报, 2017, 53(10): 1393-1401. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed