MICROSCOPIC CHARACTERIZATION AND HRTEM IMAGES OF BORON NITRIDE NANOTUBES

Acta Metall Sin

2005, Vol. 41

Issue (9): 905-909 DOI:

Research Articles

Current Issue | Archive | Adv Search

MICROSCOPIC CHARACTERIZATION AND HRTEM IMAGES OF BORON NITRIDE NANOTUBES

TANG Bei; LIU Yongli; ZHENG Hong; LI Feng; CONG Hongtao; CHENG Huiming

Shenyang National Laboratory for Materials Science; Institute of Metal Research; The Chinese Academy of Sciences; Shenyang 110016

Cite this article:

TANG Bei; LIU Yongli; ZHENG Hong; LI Feng; CONG Hongtao; CHENG Huiming. MICROSCOPIC CHARACTERIZATION AND HRTEM IMAGES OF BORON NITRIDE NANOTUBES. Acta Metall Sin, 2005, 41(9): 905-909 .

Download:

PDF(353KB)
Export: BibTeX | EndNote (RIS)

Abstract Multi-walled boron nitride nanotubes (BNNTs) synthesized by chemical vapor deposition were revealed to possess a definite stacking order (dominant r-BN stacking) and preferential zigzag chirality. Based on the microscopic characters of BNNTs, structure models were built and computer simulations of HRTEM images were carried out. It was found that HRTEM images of BNNTs with r-BN stacking are sensitive to the wall number, tubes diameter and angle of observations. Appearance of moire fringe on the HRTEM image of tube body was proposed to judge the existance of r-BN stacking.

Key words: boron nitride nanotube (BNNT) microstructure simulation

Received: 01 April 2005

ZTFLH:

TG111.2

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	TANG Bei
	LIU Yongli
	ZHENG Hong
	LI Feng
	CONG Hongtao
	CHENG Huiming

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2005/V41/I9/905

[1] Rubio A, Corkill J L, Cohen M L. Phya Rev, 1994; 49B: 5081
[2] Blase X, Rubio A, Louie S G, Cohen M L. Europhys Lett, 1994; 28: 335
[3] Kuno M, Oku T, Suganuma K. Scr Mater, 2001; 44: 1583
[4] Chopra N G, Zettl A. Solid State Commun, 1998; 105: 297
[5] Hernandez E, Goze C, Bernier P, Rubio A. Phys Rev Lett, 1998; 80: 4502
[6] Chopra N G, Luyren R J, Cherry K, Crespi V H, Cohen M L, Louie S G, Zettl A. Science, 1995; 269: 966
[7] Loiseau A, Willaime F, Demoncy N, Hug G, Pascard H. Phys Rev Lett, 1996; 76: 4737
[8] Golberg D, Bando Y, Bourgeois L, Kurashima K, Sato T. Appl Phys Lett, 2000; 77: 1979
[9] Golberg D, Han W, Bando Y, Bourgeois L, Kurashima K, Sato T. J Appl Phys, 1999; 86: 2364
[10] Golberg D, Bando Y, Kurashima K, Sato T. Chem Phys Lett, 2000; 323: 185
[11] Demczyk B G, Cumings J, Zettl A, Ritchie R O. Appl Phys Lett, 2001; 78: 2772

[1]	WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[2]	CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[3]	GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[4]	ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800^oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[5]	LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[6]	BI Zhongnan, QIN Hailong, LIU Pei, SHI Songyi, XIE Jinli, ZHANG Ji. Research Progress Regarding Quantitative Characterization and Control Technology of Residual Stress in Superalloy Forgings[J]. 金属学报, 2023, 59(9): 1144-1158.
[7]	LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096.
[8]	ZHANG Haifeng, YAN Haile, FANG Feng, JIA Nan. Molecular Dynamic Simulations of Deformation Mechanisms for FeMnCoCrNi High-Entropy Alloy Bicrystal Micropillars[J]. 金属学报, 2023, 59(8): 1051-1064.
[9]	CHEN Liqing, LI Xing, ZHAO Yang, WANG Shuai, FENG Yang. Overview of Research and Development of High-Manganese Damping Steel with Integrated Structure and Function[J]. 金属学报, 2023, 59(8): 1015-1026.
[10]	LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[11]	SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[12]	ZHANG Lu, YU Zhiwei, ZHANG Leicheng, JIANG Rong, SONG Yingdong. Thermo-Mechanical Fatigue Cycle Damage Mechanism and Numerical Simulation of GH4169 Superalloy[J]. 金属学报, 2023, 59(7): 871-883.
[13]	FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti₂AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[14]	GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756.
[15]	ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y₂O₃ Content on Properties of Fe-Y₂O₃ Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed