Acta Metall Sin  1996, Vol. 32 Issue (1): 101-104    DOI:

Current Issue | Archive | Adv Search |

IN SITU PREPARATION OF AlN AND TiC PARTICULATES REINFORCED Al MATRIX COMPOSITE

CUI Chunxiang; WU Renjie (Shanghai Jiaotong University; Shanghai 200030)(Manuscript received 1995-04-11; in revised form 1995-09-05)

CUI Chunxiang; WU Renjie (Shanghai Jiaotong University; Shanghai 200030)(Manuscript received 1995-04-11; in revised form 1995-09-05). IN SITU PREPARATION OF AlN AND TiC PARTICULATES REINFORCED Al MATRIX COMPOSITE. Acta Metall Sin, 1996, 32(1): 101-104.

Abstract References Related Articles Recommended Metrics Download:  PDF(275KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The better aluminum alloy composite reinforced with AIN-TiC particulates,by in situ reaction, was prepared as follows: an aluminum alloy, containing Ti and others,was melted at temperature ranged from 900 to 1200℃ , and the gaseous atomic nitrogen and carbon flow was injected by proper manner into the melting Al so that AIN (0. 2-1 .2μm) and TiC (2-5μm) formed by in situ reaction dispersed in aluminum matrix homogeneously.Correspondent: CUI Chunxiang,(Institute of Composite, Shanghai Jiaotong University, Shanghai 200030) Key words:  in situ reaction      particulate strengthening      cast aluminum alloy      metal matrix composite      Received:  18 January 1996      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I1/101 1BaeerB．USPat4710348,19872BurkeJT,AghajanianMK,RocazellaMA．Tomorrow′sMaterialsToday,IntSAMPESympSer34,1989:24403LinY．MetallTrans,1991;22A:8594程兰征,韩世纲．物理化学．上海:上海科学技术出版社,1980:1875RoyM．MetallTrans,1992:23A:28346MurrayJL．BinaryAlloyPhaseDiagrams,Ohio:ASM,MetalsPark,1986:173f [1] MA Guonan, ZHU Shize, WANG Dong, XIAO Bolv, MA Zongyi. Aging Behaviors and Mechanical Properties of SiC/Al-Zn-Mg-Cu Composites[J]. 金属学报, 2023, 59(12): 1655-1664. [2] FAN Genlian, GUO Zhiqi, TAN Zhanqiu, LI Zhiqiang. Architecture Design Strategies and Strengthening-Toughening Mechanisms of Metal Matrix Composites[J]. 金属学报, 2022, 58(11): 1416-1426. [3] ZHU Shize, WANG Dong, WANG Quanzhao, XIAO Bolv, MA Zongyi. Influence of Cu Content on the Negative Effect of Natural Aging in SiC/Al-Mg-Si-Cu Composites[J]. 金属学报, 2021, 57(7): 928-936. [4] Hulin DONG,Haiping BAO,Jianhong PENG. Effect of TiC Contents on Mechanical Properties and Wear Resistance of Iron-Based Composites[J]. 金属学报, 2019, 55(8): 1049-1057. [5] Huiyuan WANG,Chao LI,Zhigang LI,Jin XU,Hongjiang HAN,Zhiping GUAN,Jiawang SONG,Cheng WANG,Pinkui MA. Current Research and Future Prospect on the Preparation and Architecture Design of Nanomaterials Reinforced Light Metal Matrix Composites[J]. 金属学报, 2019, 55(6): 683-691. [6] MA Guonan, WANG Dong, LIU Zhenyu, BI Sheng, ZAN Yuning, XIAO Bolv, MA Zongyi. Effect of Hot Pressing Temperature on Microstructure and Tensile Properties of SiC/Al-Zn-Mg-Cu Composites[J]. 金属学报, 2019, 55(10): 1319-1328. [7] Jianqiang REN, Shuhua LIANG, Yihui JIANG, Xiang DU. Research on the Microstructure and Properties of In Situ (TiB2-TiB)/Cu Composites[J]. 金属学报, 2019, 55(1): 126-132. [8] Xuexi ZHANG, Zhong ZHENG, Ying GAO, Lin GENG. Progress in High Throughput Fabrication and Characterization of Metal Matrix Composites[J]. 金属学报, 2019, 55(1): 109-125. [9] Bolü XIAO, Zhiye HUANG, Kai MA, Xingxing ZHANG, Zongyi MA. Research on Hot Deformation Behaviors of Discontinuously Reinforced Aluminum Composites[J]. 金属学报, 2019, 55(1): 59-72. [10] Gaohui WU, Jing QIAO, Longtao JIANG. Research Progress on Principle of Dimensional Stability and Stabilization Design of Al and Its Composites[J]. 金属学报, 2019, 55(1): 33-44. [11] Tongxiang FAN, Yue LIU, Kunming YANG, Jian SONG, Di ZHANG. Recent Progress on Interfacial Structure Optimization and Their Influencing Mechanism of Carbon Reinforced Metal Matrix Composites[J]. 金属学报, 2019, 55(1): 16-32. [12] Yanqiu WANG,Kun WU,Fuhui WANG. EFFECTS OF SECOND PHASES ON MICROARC OXIDATION PROCESS OF MAGNESIUM BASE MATERIALS[J]. 金属学报, 2016, 52(6): 689-697. [13] XU Shijiao XIAO Bolu LIU Zhenyu WANG Wenguang MA Zongyi. MICROSTRUCTURES AND MECHANICAL PROPERTIES OF CNT/Al COMPOSITES FABRICATED BY HIGH ENERGY BALL-MILLING METHOD[J]. 金属学报, 2012, 48(7): 882-888. [14] ZHUO Haiou TANG Jiancheng YE Nan. Cu–Y2O3 COMPOSITES PREPARED BY LIQUID PHASE IN SITU REACTION[J]. 金属学报, 2012, 48(12): 1474-1478. [15] MO Defeng HE Guoqiu HU Zhengfei LIU Xiaoshan ZHANG Weihua. EFFECT OF MICROSTRUCTURES ON STRAIN HARDENING EXPONENT PREDICTION OF CAST ALUMINUM ALLOY[J]. 金属学报, 2010, 46(2): 184-188. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed