|
|
SURFACE MODIFICATION OF 316L STAINLESS STEEL BY HIGH CURRENT PULSED ELECTRON BEAM Part II Corrosion behaviors in the simulated body fluid |
;;; |
大连理工大学材料学院 |
|
Cite this article:
;. SURFACE MODIFICATION OF 316L STAINLESS STEEL BY HIGH CURRENT PULSED ELECTRON BEAM Part II Corrosion behaviors in the simulated body fluid. Acta Metall Sin, 2007, 42(1): 71-76 .
|
Abstract Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization procedures were used to investigate the pitting corrosion behaviors in the simulated body fluid of AISI 316L stainless steel treated by high current pulsed electron beam (HCPEB). The results showed that the corrosion resistance of 316L samples was significantly improved after HCPEB treatment, which was demonstrated by the increased polarization resistance (Rp) and decreased interface capacitance. The samples after 5 pulses are prone to pitting due to the existence of remnant MnS inclusions or holes in the crater centers. Comparatively, the sample after 20 pulses of HCPEB treatment shows the best corrosion resistance. Its corrosion current density has been decreased to 1/15 of the initial samples, which can be attributed to the selective surface purification effect and removal of physical damages with increasing number of pulses.
|
Received: 04 April 2006
|
|
[1] Wranglen G.Corros Sci,1974;14:331 [2] Eklund G S.J Electrochem Soc,1974;121:467 [3] Ryan M P,Williams D E,Chater R J,Hutton B M, McPhail D S.Nature,2002;415:770 [4] Gurappa I.Mater Charact,2002;49:73 [5] Newman R C.Nature,2002;415:743 [6] Yue T M,Yu J K,Man H C.Surf Coat Technol,2001; 137:65 [7] Lo K H,Cheng F T,Kwok C T,Man H C.Surf Coat Technol,2003;165:258 [8] Meinert K,wolf G K.Surf Coat Technol,1998;98:l148 [9] Liu C L,Lin G Q,Yang D Z,Qi M.Surf Coat Technol, 2006;200:4011 [10] Proskurovsky D I,Rotshtein V P,Ozur G E,Markov A B,Nazarov D S.J Vac Sci Technol,1998;16A:2480 [11] Dong C,Wu A M,Hao S Z,Zou J X,Liu Z M,Zhong P, Zhang A M,Xu T,Chen J M,Xu J,Liu Q,Zhou Z R.Surf Coat Technol,2003;163—164:620 [12] Zhang K M,Yang D Z,Zou J X,Dong C.Acta Metall Sin,2007;43:64 (张可敏,杨大智,邹建新,董闯.金属学报,2007;43:64) [13] Norlin A,Pan J,Leygraf C.Biomol Eng,2002;19:67 [14] Li M C,Luo S Z,Zeng C L,Shen J N,Lin H C,Cao C N.Corros Sci,2004;46:1369 [15] Williams D E,Mohiuddin T F,Zhu Y Y.J Electrochem Soc,1998;145:2664 [16] Cao C N.The Principle of Corrosion Electrochemistry.2nd Edition,Beijing:Chemical Industry Press,2004:262 (曹楚南.腐蚀电化学原理.第2版,北京:化学工业出版社, 2004:262) [17] Liu C,Leyland A,Lyon S,Matthews A.Surf Coat Tech—nol, 1995;76—77:615 [18] Cao C N,Zhang J Q.An Introduction to Electrochemical Impedance Spectroscopy.Beijing:Science Press,2002:86 (曹楚南,张鉴清.电化学阻抗谱导论.北京:科学出版社,2002: 86)Y |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|