Acta Metall Sin  1997, Vol. 33 Issue (6): 638-642    DOI:

Current Issue | Archive | Adv Search |

IN SITU SYNTHESIS OF HIGHLY DENSIFIED TiC_p / Ni_3Al COMPOSITES

LIU Haozhe; WANG Aimin; WANG Luhong;DING Bingzhe; HU Zhuangqi (StateKey Lab of RSA; Institute of Metal Research; Chinese Academy of Sciences;Shenyand 110015)

LIU Haozhe; WANG Aimin; WANG Luhong;DING Bingzhe; HU Zhuangqi (StateKey Lab of RSA; Institute of Metal Research; Chinese Academy of Sciences;Shenyand 110015). IN SITU SYNTHESIS OF HIGHLY DENSIFIED TiC_p / Ni_3Al COMPOSITES. Acta Metall Sin, 1997, 33(6): 638-642.

Abstract References Related Articles Recommended Metrics Download:  PDF(899KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The TiC particles reinforced Ni3Al intermetallic compound matrix compositeswere in situ synthesized under high temperature (1073-1473 K) and high pressure (1.5-6.5GPa) conditions. The densities of these composites exceed 98% of theoretical value. Themean grain size of TiC particles is nanometer scale. The influence of high pressure on thegrain size, and therefore the effect on the microhardness were discussed. Key words:  TiC      nanometer particle      Ni_3Al      composite. high pressure      Received:  18 June 1997      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1997/V33/I6/638 1Liu C T, White C L. Horton J A. Acta Met, 1985; 33: 213 2 Dunmead S D,Munir Z A,Holt J B,Kingman D D.JMater Sci.1991;26:2410 3 Mei B,Yuan R,Duan X.J Mater Res,1993;8:2830 4梅炳初,袁润章.硅酸盐学报,1994,22:168 5 Yamada O,Miyamoto Y,Doizumi M.J Am Ceram Soc,1987;70:C206 6Bradley C C.High pressure methods in solid state researdch London:Butterworth & Co.Ltd,1969;6:128 7Wang L, Beck N. Arsenault R J. Mater Sci Eng, 1994; 177: 83 8 Lees J, Williamson B H J. Nature, 1965; 208: 278 9仝兴存,沈宁福,柳百成.金属学报,1994;30:A155 10Li D,Ding B.Yao B,Hu Z,Wang A,Li S,Wei W.Nanostructure Mater,1994.4:323 11 Liu H, Yao B, Wand L. Wang A, Ding B, Hu Z Mater Lett, 1996; 27: 183 [1] ZHENG Liang, ZHANG Qiang, LI Zhou, ZHANG Guoqing. Effects of Oxygen Increasing/Decreasing Processes on Surface Characteristics of Superalloy Powders and Properties of Their Bulk Alloy Counterparts: Powders Storage and Degassing[J]. 金属学报, 2023, 59(9): 1265-1278. [2] LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985. [3] XU Yongsheng, ZHANG Weigang, XU Lingchao, DAN Wenjiao. Simulation of Deformation Coordination and Hardening Behavior in Ferrite-Ferrite Grain Boundary[J]. 金属学报, 2023, 59(8): 1042-1050. [4] ZHANG Haifeng, YAN Haile, FANG Feng, JIA Nan. Molecular Dynamic Simulations of Deformation Mechanisms for FeMnCoCrNi High-Entropy Alloy Bicrystal Micropillars[J]. 金属学报, 2023, 59(8): 1051-1064. [5] ZHAO Pingping, SONG Yingwei, DONG Kaihui, HAN En-Hou. Synergistic Effect Mechanism of Different Ions on the Electrochemical Corrosion Behavior of TC4 Titanium Alloy[J]. 金属学报, 2023, 59(7): 939-946. [6] LU Yuhua, WANG Haizhou, LI Dongling, FU Rui, LI Fulin, SHI Hui. A Quantitative and Statistical Method of γ' Precipitates in Superalloy Based on the High-Throughput Field Emission Scanning Eelectron Microscope[J]. 金属学报, 2023, 59(7): 841-854. [7] ZHANG Lu, YU Zhiwei, ZHANG Leicheng, JIANG Rong, SONG Yingdong. Thermo-Mechanical Fatigue Cycle Damage Mechanism and Numerical Simulation of GH4169 Superalloy[J]. 金属学报, 2023, 59(7): 871-883. [8] ZHANG Qiliang, WANG Yuchao, LI Guangda, LI Xianjun, HUANG Yi, XU Yunze. Erosion-Corrosion Performance of EH36 Steel Under Sand Impacts of Different Particle Sizes[J]. 金属学报, 2023, 59(7): 893-904. [9] LI Qian, LIU Kai, ZHAO Tianliang. Rust Formation Behavior and Mechanism of Q235 Carbon Steel in 5%NaCl Salt Spray Under Elastic Tensile Stress[J]. 金属学报, 2023, 59(6): 829-840. [10] ZHANG Deyin, HAO Xu, JIA Baorui, WU Haoyang, QIN Mingli, QU Xuanhui. Effects of Y2O3 Content on Properties of Fe-Y2O3 Nanocomposite Powders Synthesized by a Combustion-Based Route[J]. 金属学报, 2023, 59(6): 757-766. [11] WANG Changsheng, FU Huadong, ZHANG Hongtao, XIE Jianxin. Effect of Cold-Rolling Deformation on Microstructure, Properties, and Precipitation Behavior of High-Performance Cu-Ni-Si Alloys[J]. 金属学报, 2023, 59(5): 585-598. [12] XU Lei, TIAN Xiaosheng, WU Jie, LU Zhengguan, YANG Rui. Microstructure and Mechanical Properties of Inconel 718 Powder Alloy Prepared by Hot Isostatic Pressing[J]. 金属学报, 2023, 59(5): 693-702. [13] LIU Jihao, ZHOU Jian, WU Huibin, MA Dangshen, XU Huixia, MA Zhijun. Segregation and Solidification Mechanism in Spray-Formed M3 High-Speed Steel[J]. 金属学报, 2023, 59(5): 599-610. [14] WAN Tao, CHENG Zhao, LU Lei. Effect of Component Proportion on Mechanical Behaviors of Laminated Nanotwinned Cu[J]. 金属学报, 2023, 59(4): 567-576. [15] MA Zongyi, XIAO Bolv, ZHANG Junfan, ZHU Shize, WANG Dong. Overview of Research and Development for Aluminum Matrix Composites Driven by Aerospace Equipment Demand[J]. 金属学报, 2023, 59(4): 457-466. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed