Please wait a minute...
金属学报  2026, Vol. 62 Issue (10): 1773-1786    DOI: 10.11900/0412.1961.2024.00301
  研究论文 本期目录 | 过刊浏览 |
Cr对低碳含Ti微合金钢奥氏体等温分解行为的影响
熊杰, 蓝慧芳, 李林鲜, 唐帅(), 刘振宇, 王国栋
东北大学 数字钢铁全国重点实验室 沈阳 110819
Effect of Cr on the Isothermal Decomposition Behavior of Austenite in Low-Carbon Ti-Bearing Microalloyed Steel
XIONG Jie, LAN Huifang, LI Linxian, TANG Shuai(), LIU Zhenyu, WANG Guodong
State Key Laboratory of Digital Steel, Northeastern University, Shenyang 110819, China
引用本文:

熊杰, 蓝慧芳, 李林鲜, 唐帅, 刘振宇, 王国栋. Cr对低碳含Ti微合金钢奥氏体等温分解行为的影响[J]. 金属学报, 2026, 62(10): 1773-1786.
Jie XIONG, Huifang LAN, Linxian LI, Shuai TANG, Zhenyu LIU, Guodong WANG. Effect of Cr on the Isothermal Decomposition Behavior of Austenite in Low-Carbon Ti-Bearing Microalloyed Steel[J]. Acta Metall Sin, 2026, 62(10): 1773-1786.

全文: PDF(2726 KB)   HTML
摘要: 

为研究析出强化型铁素体钢中Cr对铁素体相变动力学的影响,本工作通过实验和数值模拟研究了Cr对低碳含Ti微合金钢奥氏体等温分解行为的影响,利用Thermo-Calc热动力学软件计算了铁素体与珠光体转变驱动力和铁素体生长动力学,并结合第一性原理计算阐述了Cr促进珠光体形成的机理。结果表明,Cr元素能够抑制铁素体形核和长大,促进奥氏体分解为珠光体。热动力学计算结果表明,Cr降低了γ→α相变驱动力,导致临界形核半径(r*)和临界形核功(ΔG*)增加。此外,Cr显著降低了C在奥氏体中的扩散系数,增加了扩散激活能(QC),二者综合作用导致铁素体形核速率降低。铁素体生长期间,在可忽略配分的局域平衡(NPLE)模式下,相变由C扩散控制,Cr通过降低奥氏体中C扩散系数,降低铁素体生长速率;在配分局域平衡(PLE)模式下,相变由合金元素扩散控制,由于扩散系数DCr < DMn < DSi,导致铁素体生长速率更慢。Cr元素可以大幅降低渗碳体的Gibbs自由能,增加珠光体转变驱动力。结合第一性原理计算结果可知,Cr原子倾向于置换(Fe, Mn)3C渗碳体中的Fe和Mn原子,尤其是Fe原子,从而显著降低渗碳体形成能,促进渗碳体析出,进而促进珠光体转变。

关键词 : Ti-Cr合金化,  奥氏体等温分解,  铁素体相变动力学,  珠光体转变,  渗碳体形成    
Abstract:

Ferrite precipitation-strengthened steel characterized by a large amount of nano-carbide precipitates has been widely used in the automotive industry to meet its growing energy-reduction requirements. Because of its high strength and excellent tensile flange properties, it has always been of great interest to researchers. Among the topics of interest, the composition of nanoscale carbides and their precipitation behavior have always been a popular subject area of research. In recent years, studies have confirmed that the addition of Cr is beneficial to the formation of nanoscale complex carbide in ferrite and can refine the size and increase the number density of precipitates, thereby enhancing the strength of the ferrite. The precipitation behavior of carbides is closely related to the phase transformation of ferrite. However, there is controversy about how Cr affects the kinetics of the ferrite phase transition. This study investigated the effect of Cr on the isothermal decomposition behavior of austenite in low-carbon Ti-bearing microalloyed steel using experimental and numerical simulation methods. The driving forces behind the transformation of ferrite and pearlite, as well as the growth kinetics of ferrite, were calculated using Thermo-Calc software for thermodynamics. The reasons for Cr promoting the formation of pearlite were elucidated through first-principles calculations. The isothermal experimental results indicate that Cr element inhibits the nucleation and growth of ferrite and promotes the decomposition of austenite into pearlite. Thermodynamic calculations show that Cr reduces the driving force behind the γ-α phase transition, which results in an increase in the critical nucleation radius (r*) and critical nucleation work (ΔG*). Moreover, Cr significantly reduces the diffusion coefficient of C in austenite and increases austenite's diffusion activation energy (QC). The combined effect of both factors leads to the slow nucleation of ferrite. During the growth of ferrite, its phase transformation under negligible-partitioned local equilibrium (NPLE) mode is controlled by C diffusion. Cr reduces the diffusion coefficient of C in austenite, thereby decreasing the growth rate of ferrite. Under partitioned local equilibrium (PLE) mode, the phase transformation is controlled by the diffusion of the alloying elements. Because the diffusion coefficients (Di ) of element i follow the order DCr < DMn < DSi, the growth rate of ferrite is slow. Furthermore, Cr element can significantly reduce the Gibbs free energy of the cementite, thereby increasing the driving force of the transformation of pearlite. According to first-principles calculations, Cr atoms tend to substitute for Fe and Mn atoms in (Fe, Mn)3C cementite. Particularly for the Fe atoms, they can markedly decrease the formation energy and promote the precipitation of cementite, thereby facilitating the transformation to pearlite.

Key words: Ti-Cr alloying    austenite isothermal decomposition    ferrite phase transition kinetics    pearlite transformation    cementite formation
收稿日期: 2024-08-28     
ZTFLH:  TG142.1  
基金资助:国家自然科学基金项目(52175293);国家自然科学基金项目(51774083)
通讯作者: 唐帅,tangshuai@ral.neu.edu.cn,主要从事先进金属材料制备研究
Corresponding author: TANG Shuai, professor, Tel: (024)83687224, E-mail: tangshuai@ral.neu.edu.cn
作者简介: 熊 杰,男,1993年生,博士生
图1  实验用钢的热处理工艺示意图
SteelMass fraction / %

Ae1

oC

Ae3

oC

CMnSiTiCrNOFe
0Cr0.0931.710.1070.072–0.00460.0013Bal.668822
1Cr0.1121.750.0850.0710.980.00380.0012Bal.684805
表1  实验用钢的化学成分及奥氏体转变结束温度(Ae1)和开始温度(Ae3)
图2  DICTRA模块模拟铁素体生长过程的初始条件设置
图3  650 ℃等温处理不同时间后实验用钢的OM像
图4  650 ℃等温处理10000 s后实验用钢显微组织的SEM像及M(γ)/α界面附近C和Mn元素的EPMA线扫描结果(M(γ)表示马氏体)
图5  不同温度和Cr含量下实验用钢的Gibbs自由能(G)和两相Gibbs自由能差(ΔGγ→α)
图6  不同温度下C和Mn元素在奥氏体和铁素体中的示踪扩散系数的变化曲线
SteelPhaseDCDMnDSiDTiDCr
0Crγ1.1117 × 10-134.1738 × 10-201.2467 × 10-199.4212 × 10-20–
α2.9234 × 10-113.4681 × 10-181.9886 × 10-181.1891 × 10-18–
1Crγ0.9776 × 10-134.1793 × 10-201.2467 × 10-199.4212 × 10-201.0616 × 10-20
α2.8178 × 10-113.5914 × 10-182.0735 × 10-181.2390 × 10-187.0803 × 10-19
表2  650 ℃下各元素在奥氏体和铁素体中的示踪扩散系数 (m2·s-1)
图7  650 ℃等温过程中实验用钢中铁素体相变动力学的计算和实验结果
图8  铁素体生长过程中γ/α界面移动距离和移动速率的DICTRA模拟结果
图9  不同等温时间下0Cr钢和1Cr钢中γ/α界面元素分布的DICTRA模拟结果
图10  实验钢的Fe-C相图、不同Cr含量下共析点的温度和C含量、各物相的G以及珠光体转变的相对过冷度(ΔTr)和驱动力(ΔGP)
SteelVm / (m3⋅mol-1)ΔGv / (J⋅m-3)r* / mΔG* / JQC / J
0Cr7.2958 × 10-6-5.0906 × 1071.9644 × 10-88.0821 × 10-162.4410 × 10-19
1Cr7.2963 × 10-6-4.5379 × 1072.2037 × 10-810.1707 × 10-162.4842 × 10-19
表3  相关参数计算结果
图11  650 ℃下铁素体生长的局域平衡模型示意图
图12  渗碳体和渗碳体中各元素的摩尔分数随着Cr含量的变化曲线
图13  Mn和Cr元素掺杂的渗碳体晶体构型和相应的形成能
[1] Funakawa Y, Shiozaki T, Tomita K, et al. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides[J]. ISIJ Int., 2004, 44: 1945
doi: 10.2355/isijinternational.44.1945
[2] Funakawa Y, Fujita T, Yamada K. Metallurgical features of NANOHITENTM and application to warm stamping[J]. JFE Tech. Rep., 2013, (18): 74
[3] Chen C Y, Chen S F, Chen C C, et al. Control of precipitation morphology in the novel HSLA steel[J]. Mater. Sci. Eng., 2015, A634: 123
[4] Singh N, Casillas G, Wexler D, et al. Application of advanced experimental techniques to elucidate the strengthening mechanisms operating in microalloyed ferritic steels with interphase precipitation[J]. Acta Mater., 2020, 201: 386
doi: 10.1016/j.actamat.2020.10.014
[5] Tsai S P, Jen C H, Yen H W, et al. Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel[J]. Mater. Charact., 2017, 123: 153
doi: 10.1016/j.matchar.2016.11.023
[6] Li C N, Li X L, Yuan G, et al. Precipitation behavior and mechanical properties of a hot rolled Ti-bearing dual phase steel[J]. Mater. Sci. Eng., 2016, A673: 213
[7] Tsai S P, Su T C, Yang J R, et al. Effect of Cr and Al additions on the development of interphase-precipitated carbides strengthened dual-phase Ti-bearing steels[J]. Mater. Des., 2017, 119: 319
doi: 10.1016/j.matdes.2017.01.071
[8] Kostryzhev A, Killmore C, Pereloma E. Effect of processing parameters on interphase precipitation and mechanical properties in novel CrVNb microalloyed steel[J]. Metals, 2021, 11: 107
doi: 10.3390/met11010107
[9] Xu S, Cao R, Gao J H, et al. Effect of Cr on the phase transformation and interphase nanoprecipitation behaviours of high-strength microalloyed steels[J]. Mater. Charact., 2024, 207: 113504
doi: 10.1016/j.matchar.2023.113504
[10] Rodriguez-Galeano K F, Nutter J, Azakli Y, et al. Influence of Cr and Cr + Nb on the interphase precipitation and mechanical properties of V-Mo microalloyed steels[J]. Mater. Sci. Eng., 2024, A893: 146140
[11] Suh D W, Park S J, Kim S J. Influence of Cr and Ni on microstructural evolution during heat treatment of low-carbon transformation induced plasticity steels[J]. Metall. Mater. Trans., 2008, 39A: 2015
[12] Ali M, Nyo T, Kaijalainen A, et al. Influence of chromium content on the microstructure and mechanical properties of thermomechanically hot-rolled low-carbon bainitic steels containing niobium[J]. Appl. Sci., 2020, 10: 344
doi: 10.3390/app10010344
[13] Huang B, Guo Z B, Shuai L T, et al. Control of ferrite content in 1Cr17Ni2 and its effect on mechanical properties[J]. Failure Anal. Prev., 2021, 16: 398
[13] 黄 蓓, 郭占兵, 帅林涛 等. 1Cr17Ni2铁素体含量的控制及其对性能的影响[J]. 失效分析与预防, 2021, 16: 398
[14] Oñoro J. Martensite microstructure of 9-12% Cr steels weld metals[J]. J. Mater. Process. Technol., 2006, 180: 137
doi: 10.1016/j.jmatprotec.2006.05.014
[15] Gouné M, Danoix F, Ågren J, et al. Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels[J]. Mater. Sci. Eng., 2015, R92: 1
[16] Purdy G, Ågren J, Borgenstam A, et al. ALEMI: A ten-year history of discussions of alloying-element interactions with migrating interfaces[J]. Metall. Mater. Trans., 2011, 42A: 3703
[17] Van der Ven A, Delaey L. Models for precipitate growth during the γ → α + γ transformation in Fe-C and Fe-C-M alloys[J]. Prog. Mater. Sci., 1996, 40: 181
doi: 10.1016/0079-6425(96)00002-3
[18] Militzer M, Hutchinson C, Zurob H, et al. Modelling of the diffusional austenite-ferrite transformation[J]. Int. Mater. Rev., 2023, 68: 725
doi: 10.1080/09506608.2022.2126257
[19] Gamsjäger E, Svoboda J, Fischer F D. Austenite-to-ferrite phase transformation in low-alloyed steels[J]. Comput. Mater. Sci., 2005, 32: 360
doi: 10.1016/j.commatsci.2004.09.031
[20] Lv S J, Wu H H, Wang K Y, et al. The austenite to polygonal ferrite transformation in low-alloy steel: Multi-phase-field simulation[J]. J. Mater. Res. Technol., 2023, 24: 9630
doi: 10.1016/j.jmrt.2023.05.192
[21] Chen H, Zhang C Y, Zhu J N, et al. Austenite/ferrite interface migration and alloying elements partitioning: An overview[J]. Acta Metall. Sin., 2018, 54: 217
doi: 10.11900/0412.1961.2017.00465
[21] 陈 浩, 张璁雨, 朱加宁 等. 奥氏体/铁素体界面迁移与元素配分的研究进展[J]. 金属学报, 2018, 54: 217
[22] Crusius S, Höglund L, Knoop U, et al. On the growth of ferrite allotriomorphs in Fe-C alloys/das wachstum von allotriomorphem ferrit in Fe-C-legierungen: Dedicated to professor Dr. rer. nat. Wolfgang pitsch on the occasion of his 65th birthday[J]. Int. J. Mater. Res., 1992, 83: 729
doi: 10.1515/ijmr-1992-831004
[23] Krielaart G P, Sietsma J, van der Zwaag S. Ferrite formation in Fe-C alloys during austenite decomposition under non-equilibrium interface conditions[J]. Mater. Sci. Eng., 1997, A237: 216
[24] Xia Y. Effects of Mn, Mo and other alloying elements on the formation and decomposition of austenite in steels[D]. Beijing: Tsinghua University, 2015
[24] 夏 苑. Mn、Mo等合金元素对钢中奥氏体形成及分解动力学的影响[D]. 北京: 清华大学, 2015
[25] Hillert M. Paraequilibrium and other Restricted Equilibria[J]. MRS Online Proc. Libr., 1982, 19: 295
doi: 10.1557/PROC-19-295
[26] Coates D E. Diffusion-controlled precipitate growth in ternary systems I[J]. Metall. Trans., 1972, 3: 1203
[27] Coates D E. Diffusion controlled precipitate growth in ternary systems: II[J]. Metall. Trans., 1973, 4: 1077
[28] Enomoto M, Aaronson H I. Derivation of general conditions for paraequilibrium in multi-component systems[J]. Scr. Metall., 1985, 19: 1
doi: 10.1016/0036-9748(85)90254-6
[29] Liu Z Q, Miyamoto G, Yang Z G, et al. Direct measurement of carbon enrichment during austenite to ferrite transformation in hypoeutectoid Fe-2Mn-C alloys[J]. Acta Mater., 2013, 61: 3120
doi: 10.1016/j.actamat.2013.02.003
[30] Xia Y, Miyamoto G, Yang Z G, et al. Effects of Mo on carbon enrichment during proeutectoid ferrite transformation in hypoeutectoid Fe-C-Mn alloys[J]. Metall. Mater. Trans., 2015, 46A: 2347
[31] Zhang C Y, Yang Z G, Enomoto M, et al. Prediction of Ar3 during very slow cooling in low alloy steels[J]. ISIJ Int., 2016, 56: 678
doi: 10.2355/isijinternational.ISIJINT-2015-602
[32] Liu Z Y, Yang Z G, Li Z D, et al. PLE/NPLE transition temperature of γ→α transformation in Fe-C-X alloy steel under hot deformation condition[J]. Acta Metall. Sin., 2008, 44: 703
[32] 刘志远, 杨志刚, 李昭东 等. 热变形条件下Fe-C-X合金钢γ→α相变的PLE/NPLE转变温度[J]. 金属学报, 2008, 44: 703
[33] Van Landeghem H P, Langelier B, Gault B, et al. Investigation of solute/interphase interaction during ferrite growth[J]. Acta Mater., 2017, 124: 536
doi: 10.1016/j.actamat.2016.11.035
[34] Béché A, Zurob H S, Hutchinson C R. Quantifying the solute drag effect of Cr on ferrite growth using controlled decarburization experiments[J]. Metall. Mater. Trans., 2007, 38A: 2950
[35] Wang M M, Zhang F C, Yang Z N. Effects of alloying elements and cooling rates on the high-strength pearlite steels[J]. Mater. Sci. Technol., 2017, 33: 1673
doi: 10.1080/02670836.2017.1312209
[36] Honjo M, Kimura T, Hase K. Effect of Cr on lamellar spacing and high-temperature stability in eutectoid steels[J]. Tetsu-To-Hagańe, 2015, 101: 221
[37] Chen C Y, Liao M H. Synergistic effects of carbon content and Ti/Mo ratio on precipitation behavior of HSLA steel: Insights from experiment and critical patent analysis[J]. Mater. Des., 2020, 186: 108361
doi: 10.1016/j.matdes.2019.108361
[38] Dong Y, Xiang L Y, Zhu C J, et al. Analysis of phase transformation thermodynamics and kinetics and its relationship to structure-mechanical properties in a medium-Mn high strength steel[J]. J. Mater. Res. Technol., 2023, 27: 5411
doi: 10.1016/j.jmrt.2023.10.231
[39] Nakada N, Mizutani K, Tsuchiyama T, et al. Difference in transformation behavior between ferrite and austenite formations in medium manganese steel[J]. Acta Mater., 2014, 65: 251
doi: 10.1016/j.actamat.2013.10.067
[40] Dong H K, Chen H, Wang W, et al. Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy[J]. Acta Mater., 2018, 158: 167
doi: 10.1016/j.actamat.2018.07.052
[41] Dong H K, Zhang Y J, Miyamoto G, et al. Unraveling the effects of Nb interface segregation on ferrite transformation kinetics in low carbon steels[J]. Acta Mater., 2021, 215: 117081
doi: 10.1016/j.actamat.2021.117081
[42] Lin G Q, Lan H F, Du L X. Modelling and experimental validation of austenite growth from as-quenched martensite during intercritical annealing of a medium-Mn steel[J]. J. Mater. Sci., 2021, 56: 19165
doi: 10.1007/s10853-021-06482-0
[43] Kresse G, Furthmüller J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set[J]. Comput. Mater. Sci., 1996, 6: 15
doi: 10.1016/0927-0256(96)00008-0
[44] Enkovaara J, Rostgaard C, Mortensen J J, et al. Electronic structure calculations with GPAW: A real-space implementation of the projector augmented-wave method[J]. J. Phys.: Condens. Matter, 2010, 22: 253202
doi: 10.1088/0953-8984/22/25/253202
[45] Perdew J P, Chevary J A, Vosko S H, et al. Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation[J]. Phys. Rev., 1992, 46B: 6671
[46] Perdew J P, Burke K, Ernzerhof M. Generalized gradient approximation made simple[J]. Phys. Rev. Lett., 1996, 77: 3865
doi: 10.1103/PhysRevLett.77.3865 pmid: 10062328
[47] Chadi D J. Special points for Brillouin-zone integrations[J]. Phys. Rev., 1977, 16: 1746
doi: 10.1103/PhysRevB.16.1746
[48] Herbstein F H, Smuts J. Comparison of X-ray and neutron-diffraction refinements of the structure of cementite Fe3C[J]. Acta Crystallogr., 1964, 17: 1331
doi: 10.1107/S0365110X64003346
[49] He B L, Ping D H, Geng W T. First-principles study of helium trapping in cementite Fe3C[J]. J. Nucl. Mater., 2014, 444: 368
doi: 10.1016/j.jnucmat.2013.10.023
[50] Wu K M. Growth kinetics of the ferrites formed in grains and at boundaries in a low carbon microalloyed steel[J]. Acta Metall. Sin., 2006, 42: 572
[50] 吴开明. 低碳微合金钢中晶内和晶界铁素体长大动力学[J]. 金属学报, 2006, 42: 572
[51] Yong Q L. Secondary Phases in Steels[M]. Beijing: Metallurgical Industry Press, 2006: 280
[51] 雍岐龙. 钢铁材料中的第二相[M]. 北京: 冶金工业出版社, 2006: 280
[52] Sheng G, Yang Z G. A calculation of partitional local equilibrium/negligible partitional local equilibrium boundaries in Fe-C-X systems[J]. Mater. Lett., 2008, 62: 1933
doi: 10.1016/j.matlet.2007.10.060
[53] Dai Z B, Chen H, Ding R, et al. Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite[J]. Mater. Sci. Eng., 2021, R143: 100590
[54] Wei R, Enomoto M, Hadian R, et al. Growth of austenite from as-quenched martensite during intercritical annealing in an Fe-0.1C-3Mn-1.5Si alloy[J]. Acta Mater., 2013, 61: 697
doi: 10.1016/j.actamat.2012.10.019
[1] 刘蓉, 高古辉, 桂晓露, 白秉哲. 贝氏体钢轨的低温疲劳裂纹扩展行为[J]. 金属学报, 2026, 62(9): 1541-1552.
[2] 杨坤, 郭庆伟, 李超, 张高龙, 赵宇宏, 侯华. 冲击加载下60钢的动态力学响应及层裂行为[J]. 金属学报, 2026, 62(8): 1405-1416.
[3] 杨何, 侯自勇, 胡兴益, 程金骏, 王亚茹, 范国华, 黄晓旭. 超高强不锈钢微丝表征技术:进展与展望[J]. 金属学报, 2026, 62(7): 1189-1206.
[4] 张朝磊, 潘晓坤, 高军恒, 吴宏辉, 毛新平. 超高强度钢析出相调控与强化机理研究现状及发展趋势[J]. 金属学报, 2026, 62(7): 1207-1227.
[5] 胡富昇, 成林, 侯廷平, 程石, 宋峰雨, 吴开明. 低碳低合金钢焊缝熔覆金属针状铁素体的回火稳定性[J]. 金属学报, 2026, 62(4): 599-610.
[6] 曹艳飞, 张潇, 刘宏伟, 王磊涛, 柯于斌, 何伦华, 谢振华, 王培, 李殿中. 深冷处理M50航发轴承钢中纳米碳化物析出与残余应力演化的中子研究[J]. 金属学报, 2026, 62(3): 467-476.
[7] 韩婧, 邵琛玮, 邱子浩, 张振军, 张哲峰. 晶粒尺寸对Fe-Mn-Al-C系第三代TWIP钢低周疲劳性能的影响[J]. 金属学报, 2025, 61(12): 1873-1883.
[8] 吴文伟, 向超, 张涛, 邹志航, 孙勇飞, 刘金鹏, 张涛, 韩恩厚. 热处理工艺对选区激光熔化成型18Ni300马氏体时效钢微观组织及力学性能的影响[J]. 金属学报, 2025, 61(10): 1515-1530.
[9] 傅万堂, 王薇, 任利国, 白兴红, 吕知清, 李荣斌, 刘浩楠, 齐建军. V分布特性对新型980 MPa级海工特厚板用钢淬透性的影响[J]. 金属学报, 2025, 61(9): 1344-1352.
[10] 刘忠翰 陈东泽 冯伟 侯纪新 于云鹤 顾春刚 高健飞 夏志新. 累积变形对F316奥氏体不锈钢再结晶机制的影响[J]. 金属学报, 0, (): 0-0.
[11] 谢昂, 陈胜虎, 姜海昌, 戎利建. Nb含量和均质化处理对奥氏体不锈钢铸态组织和力学性能的影响[J]. 金属学报, 2025, 61(7): 1035-1048.
[12] 蔡星周, 刘胜杰, 张禹森, 李小龙, 张宇鹤, 张文彬, 陈雷, 金淼. Mn偏析对0.3C-11Mn-2.7Al-1.8Si-Fe中锰钢力学性能的影响及作用机制[J]. 金属学报, 2025, 61(7): 1024-1034.
[13] 宋逸思, 廖瑜, 李传维, 陈益华, 顾剑锋. 逆转变奥氏体对0Cr16Ni5Mo1超级马氏体不锈钢低温冲击韧性的影响[J]. 金属学报, 2025, 61(5): 687-698.
[14] 张文彬, 李小龙, 郝硕, 刘胜杰, 蔡星周, 陈雷, 金淼. TRIP型双相不锈钢Fe-19.6Cr-2Ni-2.9Mn-1.6Si的微裂纹形核及扩展[J]. 金属学报, 2025, 61(4): 608-618.
[15] 王旗涛, 李艳芬, 张家榕, 李尧志, 付海阳, 李新乐, 严伟, 单以银. 聚变增殖包层用低活化9Cr-ODS钢的室温低周疲劳行为[J]. 金属学报, 2025, 61(2): 323-335.