|
|
高钛耐磨钢中TiC析出行为及其对耐磨粒磨损性能的影响 |
孙新军(),刘罗锦,梁小凯,许帅,雍岐龙 |
钢铁研究总院工程用钢研究所 北京 100081 |
|
TiC Precipitation Behavior and Its Effect on Abrasion Resistance of High Titanium Wear-Resistant Steel |
SUN Xinjun(),LIU Luojin,LIANG Xiaokai,XU Shuai,YONG Qilong |
Department of Structrual Steels, Central Iron & Steel Research Institute, Beijing 100081, China |
引用本文:
孙新军,刘罗锦,梁小凯,许帅,雍岐龙. 高钛耐磨钢中TiC析出行为及其对耐磨粒磨损性能的影响[J]. 金属学报, 2020, 56(4): 661-672.
Xinjun SUN,
Luojin LIU,
Xiaokai LIANG,
Shuai XU,
Qilong YONG.
TiC Precipitation Behavior and Its Effect on Abrasion Resistance of High Titanium Wear-Resistant Steel[J]. Acta Metall Sin, 2020, 56(4): 661-672.
[1] | Pagounis E, Lindroos V K. Development and performance of new hard and wear-resistant engineering materials [J]. J. Mater. Eng. Perform., 1997, 6: 749 | [2] | Xie Y B, Zhang S W. The Application Status and Development Strategy Research of Tribology Science and Engineering [M]. Beijing: Higher Education Press, 2009: 1135 | [2] | 谢友柏, 张嗣伟. 摩擦学科学及工程应用现状与发展战略研究 [M]. 北京: 高等教育出版社, 2009: 1135 | [3] | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration. GB/T 24186-2009 High strength abrasion resistant steel plates for construction machine [S]. Beijing: China Standards Press, 2010 | [3] | (中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. GB/T 24186-2009 工程机械用高强度耐磨钢板 [S]. 北京: 中国标准出版社, 2010 | [4] | Liang X K, Sun X J, Yong Q L, et al. Study on performance of TiC particle reinforced martensite wear-resistant steel [J]. Iron Steel Vanad. Titan., 2017, 38(1): 48 | [4] | 梁小凯, 孙新军, 雍岐龙等. TiC颗粒强化型马氏体耐磨钢的性能研究 [J]. 钢铁钒钛, 2017, 38(1): 48 | [5] | Liu L J. TiC precipitation behavior and its effect on properties in high titanium and high wear-resistant steels [D]. Beijing: Central Iron and Steel Research Institute, 2019 | [5] | 刘罗锦. 高钛高耐磨钢中TiC析出行为及对性能的影响 [D]. 北京: 钢铁研究总院, 2019 | [6] | Liang X K, Sun X J, Yong Q L, et al. Precipitation of TiC in high Ti steel [J]. J. Iron Steel Res., 2016, 28(9): 71 | [6] | 梁小凯, 孙新军, 雍岐龙等. 高钛钢中TiC析出机制 [J]. 钢铁研究学报, 2016, 28(9): 71 | [7] | Liu L J, Liang X K, Liu J, et al. Precipitation process of TiC in low alloy martensitic steel and its effect on wear resistance [J]. ISIJ Int., 2020, 60: 168 | [8] | Do?an ? N, Hawk J A, Tylczak J H. Wear of cast chromium steels with TiC reinforcement [J]. Wear, 2001, 250: 462 | [9] | Srivastava A K, Das K. Microstructure and abrasive wear study of (Ti, W)C-reinforced high-manganese austenitic steel matrix composite [J]. Mater. Lett., 2008, 62: 3947 | [10] | Pagounis E, Lindroos V K, Talvitie M. Influence of reinforcement volume fraction and size on the microstructure and abrasion wear resistance of hot isostatic pressed white iron matrix composites [J] Metall. Mater. Trans., 1996, 27A: 4171 | [11] | Ni Z F, Sun Y S, Xue F, et al. Evaluation of electroslag remelting in TiC particle reinforced 304 stainless steel [J]. Mater. Sci. Eng., 2011, A528: 5664 | [12] | Tong X, Li F H, Kuang M, et al. Effects of WC particle size on the wear resistance of laser surface alloyed medium carbon steel [J]. Appl. Surf. Sci., 2012, 258: 3214 | [13] | Kang N, Ma W Y, Li F H, et al. Microstructure and wear properties of selective laser melted WC reinforced 18Ni-300 steel matrix composite [J]. Vacuum, 2018, 154: 69 | [14] | Wei S Z, Zhu J H, Xu L J. Effects of vanadium and carbon on microstructures and abrasive wear resistance of high speed steel [J]. Tribol. Int., 2006, 39: 641 | [15] | Wei S Z, Zhu J H, Xu L J. Research on wear resistance of high speed steel with high vanadium content [J]. Mater. Sci. Eng., 2005, A404: 138 | [16] | Xu L J, Xing J D, Wei S Z, et al. Study on relative wear resistance and wear stability of high-speed steel with high vanadium content [J]. Wear, 2007, 262: 253 | [17] | Xu L J, Wei S Z, Xiao F N, et al. Effects of carbides on abrasive wear properties and failure behaviours of high speed steels with different alloy element content [J]. Wear, 2017, 376-377: 968 | [18] | Kan W H, Proust G, Bhatia V, et al. Slurry erosion, sliding wear and corrosion behavior of martensitic stainless steel composites reinforced in-situ with NbC particles [J]. Wear, 2019, 420-421: 149 | [19] | Zhang D W, Lei T C, Li F J. Laser cladding of stainless steel with Ni-Cr3C2 for improved wear performance [J]. Wear, 2001, 250: 1372 | [20] | Lu Q, He G Q, Yang Y, et al. The friction and wear properties of silicon carbide particle reinforced aluminum matrix composite [J]. Met. Funct. Mater., 2015, 22(2): 41 | [20] | 卢 棋, 何国球, 杨 洋等. SiC颗粒增强铝基复合材料的摩擦磨损性能研究 [J]. 金属功能材料, 2015, 22(2): 41 | [21] | Ma Y P, Li X L, Wang C H, et al. Microstructure and impact wear resistance of TiN reinforced high manganese steel matrix [J]. J. Iron Steel Res. Int., 2012, 19: 60 | [22] | Rong W, Tu J P, Guo S Y. Sliding wear behavior of TiB2 nanoparticle reinforced copper matrix in-situ composites under electric current [J]. Mater. Sci. Forum, 2003, 426-432: 2065 | [23] | Shanmugaselvam P, Sivaraj S, Subash P. Investigating the wear and hardness of aluminium LM25 alloy reinforced with nano Al2O3 and nano TiB2 [J]. Mater. Today, 2019, 16: 1130 | [24] | Vardavoulias M, Jeandin M, Velasco F, et al. Dry sliding wear mechanism for P/M austenitic stainless steels and their composites containing Al2O3 and Y2O3 particles [J]. Tribol. Int., 1996, 29: 499 | [25] | Ramachandra M, Abhishek A, Siddeshwar P, et al. Hardness and wear resistance of ZrO2 nano particle reinforced Al nanocomposites produced by powder metallurgy [J]. Proced. Mater. Sci., 2015, 10: 212 | [26] | Do?an ? N, Hawk J A, Tylczak J H, et al. Wear of titanium carbide reinforced metal matrix composites [J]. Wear, 1999, 225-229: 758 | [27] | Zhang X N, Lü W J, Zhang D, et al. In situ technique for synthesizing (TiB+TiC)/Ti composites [J]. Scr. Mater, 1999, 41: 39 | [28] | Mao X P. Titanium Microalloyed Steel [M]. Beijing: Metallurgical Industry Press, 2016: 1 | [28] | 毛新平. 钛微合金钢 [M]. 北京: 冶金工业出版社, 2016: 1 | [29] | Kang J Y. Precipitation and strengthening behaviors of titanium/vanadium carbides in tempered martensite [D]. Beijing: Central Iron and Steel Research Institute, 2015 | [29] | 康俊雨. Ti/V碳化物在回火马氏体中的沉淀析出及其强化行为研究 [D]. 北京: 钢铁研究总院, 2015 | [30] | Kang J Y, Sun X J, Li Z D, et al. Precipitation and coarsening of TiC and VC in tempering process of low carbon martensite steels [J]. Iron Steel, 2015, 50(10): 64 | [30] | 康俊雨, 孙新军, 李昭东等. TiC和VC在低碳马氏体钢回火中的析出和粗化 [J]. 钢铁, 2015, 50(10): 64 | [31] | Yong Q L. Secondary Phases in Steels [M]. Beijing: Metallurgical Industry Press, 2006: 1 | [31] | 雍岐龙. 钢铁材料中的第二相 [M]. 北京: 冶金工业出版社, 2006: 1 | [32] | Wang Z Q, Yong Q L, Sun X J, et al. An analytical model for the kinetics of strain-induced precipitation in titanium micro-alloyed steels [J]. ISIJ Int., 2012, 52: 1661 | [33] | Wang Z Q, Mao X P, Yang Z G, et al. Strain-induced precipitation in a Ti micro-alloyed HSLA steel [J]. Mater. Sci. Eng., 2011, A529: 459 | [34] | Wang Z Q, Zhang H, Guo C H, et al. Effect of molybdenum addition on the precipitation of carbides in the austenite matrix of titanium micro-alloyed steels [J]. J. Mater. Sci., 2016, 51: 4996 |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|