Please wait a minute...
金属学报  2026, Vol. 62 Issue (10): 1762-1772    DOI: 10.11900/0412.1961.2024.00447
  研究论文 本期目录 | 过刊浏览 |
高温钛合金中合金原子在 α2 相中占位选择的第一性原理研究
梁弼宁1,2, 曹烁1, 王慈3, 刘建荣1(), 杨锐1, 胡青苗1()
1 中国科学院金属研究所 师昌绪先进材料创新中心 沈阳 110016
2 中国科学技术大学 材料科学与工程学院 沈阳 110016
3 哈尔滨工程大学 物理与光电工程学院 哈尔滨 150001
Site Occupation of Alloying Elements in α2 Phase in High-Temperature Titanium Alloys: A First-Principles Study
LIANG Bining1,2, CAO Shuo1, WANG Ci3, LIU Jianrong1(), YANG Rui1, HU Qingmiao1()
1 Shi -changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
2 School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China
3 College of Physics and Optoelectronic Engineering, Harbin Engineering University, Harbin 150001, China
引用本文:

梁弼宁, 曹烁, 王慈, 刘建荣, 杨锐, 胡青苗. 高温钛合金中合金原子在 α2 相中占位选择的第一性原理研究[J]. 金属学报, 2026, 62(10): 1762-1772.
Bining LIANG, Shuo CAO, Ci WANG, Jianrong LIU, Rui YANG, Qingmiao HU. Site Occupation of Alloying Elements in α2 Phase in High-Temperature Titanium Alloys: A First-Principles Study[J]. Acta Metall Sin, 2026, 62(10): 1762-1772.

全文: PDF(2433 KB)   HTML
摘要: 

合金原子在金属间化合物中的占位选择直接影响金属间化合物的性质。α2 (Ti3Al)金属间化合物相是高温钛合金中重要的强化相。受限于高温钛合金复杂的成分构成以及α2相纳米级的尺寸,合金原子在α2相中的Ti亚点阵和Al亚点阵上的占位仍不确定。本工作充分考虑了高温钛合金中α-Ti基体与α2-Ti3Al析出相间的热力学平衡,计算了常用合金化元素在高温钛合金α2相中的优先占位能,明确了这些元素的占位倾向,进而计算了各元素在两种亚点阵上的分配系数。计算结果表明,Sc、V、Cr、Mn、Fe、Y、Zr、Nb、Mo、Tc、Ru、Hf、Ta、W、Re和Os完全占据Ti亚点阵;Si、Ni、Cu、Zn、Ga、Ge、Ag、Cd、In、Sn、Pt、Au、Hg、Tl和Pb完全占据Al亚点阵;Co、Rh、Pd和Ir分布在两个亚点阵上。

关键词 : 高温钛合金,  第一性原理计算,  化学势,  原子占位分配    
Abstract:

The site occupation of alloying elements on various sublattices of intermetallic compounds directly affects their properties. The precipitation of the α2 phase (Ti3Al intermetallic compound) serves as a key strengthening mechanism in high-temperature titanium alloys. However, due to the complex composition of these alloys and the nanoscale size of the α2-Ti3Al phase, the occupation behavior of alloying elements in α2-Ti3Al remains unclear. Theoretically, this behavior can be predicted by calculating the formation energies of alloying atoms on different sublattices, which requires knowledge of the chemical potentials of the matrix atoms (Ti and Al in Ti3Al) as reference energies. Conventionally, these chemical potentials are approximated by the energies of the elements in their standard states. However, this approach is inadequate for determining site occupations in α2-Ti3Al precipitated in high-temperature alloys, as it neglects the phase equilibrium between the precipitate and matrix, which governs the chemical potentials. In addition, the influence of temperature on site occupation in α2-Ti3Al has not yet been theoretically addressed. In this study, the chemical potentials of Ti and Al are evaluated based on the phase equilibrium between the α-Ti matrix and the α2-Ti3Al precipitate. The formation energies of alloying elements on Ti and Al sublattices are then computed using first-principles methods, and their site preference is assessed by comparing these formation energies. Furthermore, the temperature-dependent partitioning of alloying elements between the two sublattices is determined based on site preference energy. The results show that, at service temperatures of high-temperature titanium alloys, elements such as Sc, V, Cr, Mn, Fe, Y, Zr, Nb, Mo, Tc, Ru, Hf, Ta, W, Re, and Os preferentially occupy the Ti sublattice; Si, Ni, Cu, Zn, Ga, Ge, Ag, Cd, In, Sn, Pt, Au, Hg, Tl, and Pb preferentially occupy the Al sublattice; while Co, Rh, Pd, and Ir distribute over both sublattices.

Key words: high-temperature titanium alloy    first-principles calculation    chemical potential    atom occupation preference
收稿日期: 2024-12-30     
ZTFLH:  TG135  
基金资助:国家自然科学基金项目(52071315);国家自然科学基金项目(52001307);国家自然科学基金项目(52201008);国家科技重大专项项目(J2019-VI-0012-0126)
通讯作者: 刘建荣,jrliu@imr.ac.cn,主要从事高温钛合金方面的研究;
胡青苗,qmhu@imr.ac.cn,主要从事工程合金计算设计方面的研究
Corresponding author: LIU Jianrong, professor, Tel: (024)23971942, E-mail: jrliu@imr.ac.cn;
HU Qingmiao, professor, Tel: (024)23971813, E-mail: qmhu@imr.ac.cn
作者简介: 梁弼宁,男,1996年生,博士生
StateμTiμAl
Equilibrium-7.946-4.866
Elemental-7.946-3.745
表1  高温钛合金中α与α2相平衡时Ti和Al的化学势与二者单质状态的化学势(μTi和μAl) (eV)
图1  第三~第六周期合金原子在α2相中的优先占位能
图2  高温钛合金中α-Ti与α2两相平衡时第三~第六周期合金元素在α2相中Ti及Al亚点阵上的分配系数(k)随温度的变化
图3  923 K时第三~第六周期元素在高温钛合金α2相中Ti与Al亚点阵上的k
图4  合金原子M占据α2相中Ti位和Al位时最近邻原子环境示意图
图5  α2相-V体系的电子结构:V分别占据Ti位和Al位的分波态密度(PDOS)曲线;VTi—Ti键的晶体轨道Hamilton布居(-COHP)曲线及成键原子PDOS曲线;VTi—Al键的-COHP曲线及成键原子PDOS曲线;VAl—Ti键的-COHP曲线及成键原子PDOS曲线
图6  α2相-Mn体系的电子结构:Mn分别占据Ti位和Al位的PDOS曲线;MnTi—Ti键的-COHP曲线及成键原子PDOS曲线;MnTi—Al键的-COHP曲线及成键原子PDOS曲线;MnAl—Ti键的-COHP曲线及成键原子PDOS曲线
图7  α2相-Co体系的电子结构:Co分别占据Ti位和Al位的PDOS曲线;CoTi—Ti键的-COHP曲线及成键原子PDOS曲线;CoTi—Al键的-COHP曲线及成键原子PDOS曲线;CoAl—Ti键的-COHP曲线及成键原子PDOS曲线
图8  α2相-Ge体系的电子结构:Ge分别占据Ti位和Al位的PDOS曲线;GeTi—Ti键的-COHP曲线及成键原子PDOS曲线;GeTi—Al键的-COHP曲线及成键原子PDOS曲线;GeAl—Ti键的-COHP曲线及成键原子PDOS曲线
[1] Williams J C, Starke Jr E A. Progress in structural materials for aerospace systems[J]. Acta Mater., 2003, 51: 5775
doi: 10.1016/j.actamat.2003.08.023
[2] Eylon D, Fujishiro S, Postans P J, et al. High-temperature titanium alloys—A review[J]. JOM, 1984, 36(11): 55
[3] Wang Q J, Liu J R, Yang R. High temperature titanium alloys: Status and perspective[J]. J. Aeronaut. Mater., 2014, 34(4): 1
[3] 王清江, 刘建荣, 杨 锐. 高温钛合金的现状与前景[J]. 航空材料学报, 2014, 34(4): 1
doi: 10.11868/j.issn.1005-5053.2014.4.001
[4] Rosenberger A H, Madsen A, Ghonem H. Aging effects on the creep behavior of the near-alpha titanium alloy Ti-1100[J]. J. Mater. Eng. Perform., 1995, 4: 182
doi: 10.1007/BF02664112
[5] Neeraj T, Mills M J. Short-range order (SRO) and its effect on the primary creep behavior of a Ti-6wt.%Al alloy[J]. Mater. Sci. Eng., 2001, A319-321: 415
[6] Li D, Liu Y Y. On the thermal stability of Ti alloys Ⅱ. The behaviour of transition elements in Ti3 X-phase formation[J]. Acta Metall. Sin., 1984, 20: 384
[6] 李 东, 刘羽寅. 钛合金热稳定性研究Ⅱ.过渡族元素在Ti3X相形成中的行为 [J]. 金属学报, 1984, 20: 384
[7] Yue K, Liu J R, Zhang H J, et al. Precipitates and alloying elements distribution in near α titanium alloy Ti65[J]. J. Mater. Sci. Technol., 2020, 36: 91
doi: 10.1016/j.jmst.2019.03.018
[8] Wu Z W, Qiu C L, Venkatesh V, et al. The influence of precipitation of alpha2 on properties and microstructure in TIMETAL 6-4[J]. Metall. Mater. Trans., 2013, 44A: 1706
[9] Radecka A, Coakley J, Vorontsov V A, et al. Precipitation of the ordered α2 phase in a near-α titanium alloy[J]. Scr. Mater., 2016, 117: 81
doi: 10.1016/j.scriptamat.2016.02.015
[10] Radecka A, Bagot P A J, Martin T L, et al. The formation of ordered clusters in Ti-7Al and Ti-6Al-4V[J]. Acta Mater., 2016, 112: 141
doi: 10.1016/j.actamat.2016.03.080
[11] Dear F F, Kontis P, Gault B, et al. Mechanisms of Ti3Al precipitation in hcp α-Ti[J]. Acta Mater., 2021, 212: 116811
doi: 10.1016/j.actamat.2021.116811
[12] Zhang S Z, Xu H Z, Li G P, et al. Effect of carbon and aging treatment on precipitation of ordered α2 in Ti-5.6Al-4.8Sn-2Zr-1Mo-0.35Si-0.7Nd alloy[J]. Mater. Sci. Eng., 2005, A408: 290
[13] Xin S W, Zhao Y Q, Zeng W D. Inductions and discussions of solid state phase transformation of titanium alloy(Ⅱ)—Eutectoid and ordering transformation[J]. Titanium Ind. Prog., 2008, 25(1): 40
[13] 辛社伟, 赵永庆, 曾卫东. 钛合金固态相变的归纳与讨论(Ⅱ)—共析和有序化转变[J]. 钛工业进展, 2008, 25(1): 40
[14] Hao Y L, Xu D S, Cui Y Y, et al. The site occupancies of alloying elements in TiAl and Ti3Al alloys[J]. Acta Mater., 1999, 47: 1129
doi: 10.1016/S1359-6454(99)00006-3
[15] Xu D S, Song Y, Li D, et al. Site occupancy of alloying elements in Ti3Al compounds[J]. Mater. Sci. Eng., 1997, A234-236: 230
[16] Holec D, Reddy R K, Klein T, et al. Preferential site occupancy of alloying elements in TiAl-based phases[J]. J. Appl. Phys., 2016, 119: 205104
doi: 10.1063/1.4951009
[17] Wei Y, Zhang Y, Lu G H, et al. Effects of transition metals in a binary-phase TiAl-Ti3Al alloy: From site occupancy, interfacial energetics to mechanical properties[J]. Intermetallics, 2012, 31: 105
doi: 10.1016/j.intermet.2012.06.012
[18] Benedek R, van de Walle A, Gerstl S S A, et al. Partitioning of solutes in multiphase Ti-Al alloys[J]. Phys. Rev., 2005, 71B: 094201
[19] Chen L Q. Chemical potential and Gibbs free energy[J]. MRS Bull., 2019, 44: 520
doi: 10.1557/mrs.2019.162
[20] Guan H Q, Huang S S, Ding J H, et al. Chemical environment and magnetic moment effects on point defect formations in CoCrNi-based concentrated solid-solution alloys[J]. Acta Mater., 2020, 187: 122
doi: 10.1016/j.actamat.2020.01.044
[21] Tang C, Zhang L, Wijethunge D, et al. Controllable polarization and doping in ferroelectric In2Se3 monolayers and heterobilayers via intrinsic defect engineering[J]. J. Phys. Chem., 2021, 125C: 24648
[22] Kresse G, Furthmüller J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set[J]. Comput. Mater. Sci., 1996, 6: 15
doi: 10.1016/0927-0256(96)00008-0
[23] Kresse G, Joubert D. From ultrasoft pseudopotentials to the projector augmented-wave method[J]. Phys. Rev., 1999, 59B: 1758
[24] Perdew J P, Burke K, Ernzerhof M. Generalized gradient approximation made simple[J]. Phys. Rev. Lett., 1996, 77: 3865
doi: 10.1103/PhysRevLett.77.3865 pmid: 10062328
[25] Monkhorst H J, Pack J D. Special points for Brillouin-zone integrations[J]. Phys. Rev., 1976, 13B: 5188
[26] Maintz S, Deringer V L, Tchougréeff A L, et al. LOBSTER: A tool to extract chemical bonding from plane-wave based DFT[J]. J. Comput. Chem., 2016, 37: 1030
doi: 10.1002/jcc.24300 pmid: 26914535
[27] Kobayashi Y, Oda E, Nishiuchi T, et al. Cation distribution analysis of Sr-La-Co M-type ferrites by neutron diffraction, extended X-ray absorption fine structure and X-ray magnetic circular dichroism[J]. J. Ceram. Soc. Japan, 2011, 119: 285
doi: 10.2109/jcersj2.119.285
[28] Liu R S, Yu X, Sun Y, et al. Occupation distribution analysis of Co in La-Co substituted M-type hexaferrite and its significant effect on magnetic properties[J]. J. Alloys Compd., 2024, 1003: 175659
doi: 10.1016/j.jallcom.2024.175659
[29] Muto S, Ohtsuka M. High-precision quantitative atomic-site-analysis of functional dopants in crystalline materials by electron-channelling-enhanced microanalysis[J]. Prog. Cryst. Growth Charact. Mater., 2017, 63: 40
doi: 10.1016/j.pcrysgrow.2017.02.001
[30] Ohtsuka M, Muto S, Tatsumi K, et al. Quantitative determination of occupation sites of trace Co substituted for multiple Fe sites in M-type hexagonal ferrite using statistical beam-rocking TEM-EDXS analysis[J]. Microscopy, 2016, 65: 127
doi: 10.1093/jmicro/dfv356
[31] Singh A, Chaturvedi P. Error propagation[J]. Resonance, 2021, 26: 853
doi: 10.1007/s12045-021-1185-1
[32] Dronskowski R, Bloechl P E. Crystal orbital Hamilton populations (COHP): Energy-resolved visualization of chemical bonding in solids based on density-functional calculations[J]. J. Phys. Chem., 1993, 97: 8617
[33] Deringer V L, Tchougréeff A L, Dronskowski R. Crystal orbital Hamilton population (COHP) analysis as projected from plane-wave basis sets[J]. J. Phys. Chem., 2011, 115A: 5461
[34] Bolvardi H, Emmerlich J, Baben M T, et al. Systematic study on the electronic structure and mechanical properties of X2BC (X = Mo, Ti, V, Zr, Nb, Hf, Ta and W)[J]. J. Phys. Condens. Matter., 2013, 25: 045501
[35] Park N, Lee S C, Cha P R. Effects of alloying elements on the stability and mechanical properties of Fe3Al from first-principles calculations[J]. Comput. Mater. Sci., 2018, 146: 303
doi: 10.1016/j.commatsci.2018.01.042
[36] Zhang D, Ji S J, Cao Y, et al. Exploring the synergistic effect of alloying toward hydrogen evolution reaction: A case study of Ni3 M (M = Ti, Ge and Sn) series[J]. Dalton Trans., 2022, 51: 9728
doi: 10.1039/d2dt00956k pmid: 35700533
[37] Liu H L, Tong K, Feng X, et al. Temperature-dependent elastic and plastic properties of α2-Ti3Al[J]. Intermetallics, 2021, 139: 107368
doi: 10.1016/j.intermet.2021.107368
[38] Hu Q M, Yang R. Unconventional non-uniform local lattice distortion in dilute Ti-Mo solid solution[J]. Acta Mater., 2020, 197: 91
doi: 10.1016/j.actamat.2020.07.033
[39] Chen S M, Gao Y, Yu Z H, et al. Spontaneous symmetry breaking of substitutional solute atoms in dilute α-Ti solid solutions[J]. Phys. Rev. Mater., 2023, 7: 083605
[1] 刘丹, 白静, 章羽, 郭珂良, 刘新, 左良. Co、Si共掺杂调控Ni-Mn-Ti合金马氏体相变、磁性能和力学性能的第一性原理研究[J]. 金属学报, 2026, 62(7): 1310-1322.
[2] 宝尔根, 王建韬, 徐文静, 马会, 陈星秋. 合金元素对 α-Fe中H原子溶解及扩散影响的第一性原理研究[J]. 金属学报, 2026, 62(3): 489-496.
[3] 孟祥龙, 刘瑞良, Li D. Y.. 钽合金表面渗碳层中碳化物析出及其性能的第一性原理研究[J]. 金属学报, 2025, 61(5): 797-808.
[4] 罗列文, 王明洋, 高志明, 夏大海, 邓意达, 胡文彬. 高强铝合金晶界氢陷阱的原子尺度作用机制[J]. 金属学报, 2025, 61(11): 1747-1757.
[5] 王京京, 姚志浩, 张鹏, 赵杰, 张迈, 王蕾, 董建新, 陈迎. 镍基高温合金中S元素对基体与热障涂层界面稳定性的影响[J]. 金属学报, 2024, 60(9): 1250-1264.
[6] 周彦余, 李江旭, 刘晨, 赖俊文, 高强, 马会, 孙岩, 陈星秋. 金属间化合物Pt7Sb投影Berry相位与析氢催化关联的第一性原理计算[J]. 金属学报, 2024, 60(6): 837-847.
[7] 杨谨菡, 闫海乐, 刘昊轩, 赵莹, 杨一俏, 赵骧, 左良. A2BTi型磁性功能合金相稳定性、磁性与力学性能的第一性原理计算和实验研究[J]. 金属学报, 2024, 60(12): 1701-1709.
[8] 赵晋彬, 王建韬, 何东昌, 李俊林, 孙岩, 陈星秋, 刘培涛. 氢化物超导体临界转变温度的机器学习模型[J]. 金属学报, 2024, 60(10): 1418-1428.
[9] 王硕, 王俊升. Al-Li合金中 δ′/θ′/δ′复合沉淀相结构演化及稳定性的第一性原理探究[J]. 金属学报, 2022, 58(10): 1325-1333.
[10] 毛斐, 吕皓, 唐法威, 郭凯, 刘东, 宋晓艳. Mn和In添加对SmCo7结构稳定性及磁矩影响的第一性原理计算[J]. 金属学报, 2021, 57(7): 948-958.
[11] 张海军, 邱实, 孙志梅, 胡青苗, 杨锐. 无序β-Ti1-xNbx合金自由能及弹性性质的第一性原理计算:特殊准无序结构和相干势近似的比较[J]. 金属学报, 2020, 56(9): 1304-1312.
[12] 白静, 石少锋, 王锦龙, 王帅, 赵骧. Ni-Mn-Ga-Ti铁磁形状记忆合金的相稳定性和磁性能的第一性原理计算[J]. 金属学报, 2019, 55(3): 369-375.
[13] 董彩虹, 刘永利, 祁阳. 厚度对Bi薄膜表面特性和电学性质的影响[J]. 金属学报, 2018, 54(6): 935-942.
[14] 周刚, 叶荔华, 王皞, 徐东生, 孟长功, 杨锐. 六角结构金属中基面/柱面取向转变的孪晶路径及合金化效应的第一性原理研究[J]. 金属学报, 2018, 54(4): 603-612.
[15] 白静,李泽,万震,赵骧. Ni-Mn-Ga-Cu铁磁形状记忆合金的晶体结构、相稳定性和磁性能的第一性原理研究[J]. 金属学报, 2017, 53(1): 83-89.