Please wait a minute...
金属学报  2006, Vol. 42 Issue (2): 143-146     
  论文 本期目录 | 过刊浏览 |
氢对Ti-60钛合金显微组织和高温力学性能的影响
李芳;陈业新;万晓景;王青江;刘羽寅
上海大学材料研究所
Effects of Hydrogen on the Microstructure and High Temperature Mechanical Properties of Ti--60 Alloy
LI Fang
上海大学材料研究所
引用本文:

李芳; 陈业新; 万晓景; 王青江; 刘羽寅 . 氢对Ti-60钛合金显微组织和高温力学性能的影响[J]. 金属学报, 2006, 42(2): 143-146 .
, , , , . Effects of Hydrogen on the Microstructure and High Temperature Mechanical Properties of Ti--60 Alloy[J]. Acta Metall Sin, 2006, 42(2): 143-146 .

全文: PDF(502 KB)  
摘要: 随着氢浓度增加, Ti-60合金中的初生α相的体积分数、(α+β)→β相变点及高温屈服强度均连续降低.高温拉伸时合金的最低屈服点出现在相应氢浓度下的(α+β)→β相变点处, 进一步增加氢含量反而使合金的屈服强度升高, 其原因是氢强化了相. Ti-60合金中氢浓度w(H)与(α+β)→β相变点满足方程: t(α+β)→β(℃)=815+210exp(-3w(H)). 900℃拉伸时, 0.3%的氢使合金的屈服强度降幅达70%
关键词 Ti--60钛合金相变点屈服强度    
Abstract:The effect of hydrogen charging on the microstructure (α+β)/βtransformation and the mechanical properties of Ti-60 alloy at high temperature have been investigated. The results show that the volume fraction of primaryαand the (α+β)/βtransformation temperature is continuously decreased with increasing hydrogen contents. The result also indicate that the yield strength at high temperature is also continuously decreased with hydrogen concentration, and the minimum yield strength occurs at a concentration which corresponds to the (α+β)/βtransition and that further increase in yield strength is due to the hardening effect of hydrogen addition in the βphase.
Key wordshydrogen    Ti-60 alloy    yield strength    transformation point
收稿日期: 2005-05-27     
ZTFLH:  TG146.23  
[1] Han M C. Aerosp Mater Technol, 1999; (1): 23(韩明臣.宇航材料工艺,1999;(1):23)
[2] Ilyin A A, Polkin I S, Moamonov A M, Nosov V K. In: Blenkinsop P A, Evans W J, Flower H M, eds., Titanium'95: Science and Technology, London: Institute of Materials, 1996: 2462
[3] Costa J E, Williams T C, Thompson A W. Metall Trans, 1987; 18A: 1421
[4] Hou H L, Li Z Q, Wang Y J, Guan Q. Chin J Nonferrous Met, 2003; 13: 533 (侯红亮,李志强,王亚军,关桥.中国有色金属学报,2003;13:533)
[5] Senkov O N, Froes F H. Int J Energy, 1999; 24: 565
[6] Murzinova M A, Salishchev G A, Afonichev D D. Int J Energy, 2002; 27: 775
[7] Kerr W R, Smith P R, Rosenblum M E, Gurney F J, Mahajan Y R, Bidwell L R. In: Kimura H, Izumi O, eds., Titanium 80: Science and Technology. Warrendale: TMSAIME, 1980: 2477
[8] Lai Z H. In: Sun W C, Cui Z P, eds., Proc 7th National Conf on Titanium and Titanium Alloys, Changsha: Central South University of Technology Press, 1991: 266 (赖祖涵.见:孙文川,崔祝屏主编,第七届全国钛及钛合金学术交流会文集,长沙:中南工业大学出版社,1991:266)
[9] Fang T Y, Wang W H. Mater Chem Phys, 1998; 56: 35
[10] Yang K, Edmonds D V. Scr Metall Mater, 1993; 28: 71
[11] Senkov O N, Jonas J J. Metall Mater Trans, 1996; 27A: 1869G
[1] 李谦, 孙璇, 罗群, 刘斌, 吴成章, 潘复生. 镁基材料中储氢相及其界面与储氢性能的调控[J]. 金属学报, 2023, 59(3): 349-370.
[2] 杜宗罡, 徐涛, 李宁, 李文生, 邢钢, 巨璐, 赵利华, 吴华, 田育成. Ni-Ir/Al2O3 负载型催化剂的制备及其用于水合肼分解制氢性能[J]. 金属学报, 2023, 59(10): 1335-1345.
[3] 丁宗业, 胡侨丹, 卢温泉, 李建国. 基于同步辐射X射线成像液/固复层界面氢气泡的形核、生长演变与运动行为的原位研究[J]. 金属学报, 2022, 58(4): 567-580.
[4] 沈国慧, 胡斌, 杨占兵, 罗海文. 回火温度对含 δ 铁素体高铝中锰钢力学性能和显微组织的影响[J]. 金属学报, 2022, 58(2): 165-174.
[5] 肖娜, 惠卫军, 张永健, 赵晓丽. 真空渗碳处理齿轮钢的氢脆敏感性[J]. 金属学报, 2021, 57(8): 977-988.
[6] 兰亮云, 孔祥伟, 邱春林, 杜林秀. 基于多尺度力学实验的氢脆现象的最新研究进展[J]. 金属学报, 2021, 57(7): 845-859.
[7] 安旭东, 朱特, 王茜茜, 宋亚敏, 刘进洋, 张鹏, 张钊宽, 万明攀, 曹兴忠. 奥氏体316不锈钢中位错与氢的相互作用机理[J]. 金属学报, 2021, 57(7): 913-920.
[8] 朱敏, 欧阳柳章. 镁基储氢合金动力学调控及电化学性能[J]. 金属学报, 2021, 57(11): 1416-1428.
[9] 杨柯,史显波,严伟,曾云鹏,单以银,任毅. 新型含Cu管线钢——提高管线耐微生物腐蚀性能的新途径[J]. 金属学报, 2020, 56(4): 385-399.
[10] 李金许,王伟,周耀,刘神光,付豪,王正,阚博. 汽车用先进高强钢的氢脆研究进展[J]. 金属学报, 2020, 56(4): 444-458.
[11] 刘振宝,梁剑雄,苏杰,王晓辉,孙永庆,王长军,杨志勇. 高强度不锈钢的研究及发展现状[J]. 金属学报, 2020, 56(4): 549-557.
[12] 董福涛,薛飞,田亚强,陈连生,杜林秀,刘相华. 退火温度对TWIP钢组织性能和氢致脆性的影响[J]. 金属学报, 2019, 55(6): 792-800.
[13] 张体明, 赵卫民, 蒋伟, 王永霖, 杨敏. X80钢焊接残余应力耦合接头组织不均匀下氢扩散的数值模拟[J]. 金属学报, 2019, 55(2): 258-266.
[14] 丘玉萍, 戴豪, 戴洪斌, 王平. 适于水合肼分解制氢的Ni-Pt/CeO2催化剂的表面组分调控[J]. 金属学报, 2018, 54(9): 1289-1296.
[15] 王帅鹏, 罗文华, 李赣, 李海波, 张广丰. La含量对Ce-La合金氢化动力学的影响[J]. 金属学报, 2018, 54(8): 1187-1192.