Please wait a minute...
金属学报  2005, Vol. 41 Issue (1): 19-    
  论文 本期目录 | 过刊浏览 |
二元合金Laves相结构的PLS分析
蒋卫卿 黄存可 黄 丹 菅晓玲 郭 进
广西大学物理科学与工程技术学院; 南宁530004
PLS Method Applied to Analysis of Binary Laves Phase Structures
JIANG Weiqing; HUANG Cunke; HUANG Dan; JIAN Xiaoling; GUO Jin
College of Physics Science and Technology; Guangxi University; Nanning 530004
引用本文:

蒋卫卿; 黄存可; 黄丹; 菅晓玲; 郭进 . 二元合金Laves相结构的PLS分析[J]. 金属学报, 2005, 41(1): 19-.
, , , , . PLS Method Applied to Analysis of Binary Laves Phase Structures[J]. Acta Metall Sin, 2005, 41(1): 19-.

全文: PDF(149 KB)  
摘要: 用模式识别的偏最小二乘法(PLS)对AB2合金MgCu2型(C15)和MgZn2型(C14)Laves相进行研究, 得出了影响二元合金Laves相结构的判据. 对于由非过渡--过渡元素、过渡--过渡元素组成的合金, 价电子密度是影响其Laves相结构的主要原因;对过渡--镧系(锕系) 元素组成的合金, B原子的价电子数对其Laves相结构影响最为明显, 且价电子和原子半径对Laves相结构的影响作用互为反向.
关键词 Laves相PLS方法    
Abstract:The AB2 type Laves phases with cubic MgCu2 and hexagonal MgZn2 structures are investigated by partial least square (PLS) method and some criteria for classification of the two structures of Laves phases are obtained. It is found that for nontransition-transition and transition-transition alloys the valence electron densities of component elements are significant in influencing their Laves phase structures, and for transition-lanthanide (actinides) alloys the valence electron density of the atom at B position is the most important factor influencing their Laves phase structures. Besides, the effects of both valence charge and atomic radius on Laves phase structures are in opposition to each other in transition-lanthanide (actinides) alloys.
Key wordsLaves phase    partial least square method (PLS)
收稿日期: 2004-02-09     
ZTFLH:  TG111.5  
[1] Ansara I, Chart T G, Guillermet A F, Hayes F H, KattnerU R. CALPHAD, 1997; 21: 171
[2] Liu C T, Zhu J H, Brady M P, McKamey G G, Pike L M.Intermetallics, 2000; 8:1119
[3] Yoshida M, Ishibashi H, Susa K, Ogura T, Akiba E. JAlloys Compd, 1995; 226: 161
[4] Xu Y H, Chen C P, Wang X L, Lei Y Q, Wang Q D. JAlloys Compd, 2002; 337: 214
[5] Liu B H, Li Z P, Kitani R, Suda S. J Alloys Compd, 2002;330-332: 825
[6] Shu K Y, Zhang S K, Lei Y Q, Lu G L, Wang Q D. JAlloys Compd, 2003; 349: 237
[7] Iwakura C, Kasuga H, Kim I, Inoue H, Matsuoka M. Elec-trochim Acta, 1996; 41:2691
[8] Du Y L, Yang X G, Zhang Q A, Lei Y Q, Zhang M S. IntJ Hydrogen Energy, 2001; 26: 333
[9] Okada M, Kuriiwa T, Kamegawa A, Takamura H. MaterSci Eng, 2002; 329-331A: 305
[10] Stein F, Palm M, Sauthoff G. Intermetallics, 2004; 12:713
[11] Zhu J H, Liu C T, Pike L M, Liaw P K. Intermetallics,2002; 10: 579
[12] Chen N Y, Li C H, Yao S W, Wang X Y. J Alloys Compd,1996; 234: 130
[13] Yao S W, Li C H, Qin P, Chen N Y. Comp Appl Chem,1997; 14(1): 75(姚树文,李重河,钦佩,陈念贻.计算机与应用化学,1997;14(1):75)
[14] Hoskuldsson A. J Chemometrics, 1988; 2: 211_
[1] 温冬辉, 姜贝贝, 王清, 李相伟, 张鹏, 张书彦. MoNb改性FeCrAl不锈钢高温组织演变和力学性能[J]. 金属学报, 2022, 58(7): 883-894.
[2] 陈建军, 丁雨田, 王琨, 闫康, 马元俊, 王兴茂, 周胜名. Laves相对 GH3625合金管材热挤压过程中爆裂行为的影响[J]. 金属学报, 2021, 57(5): 641-650.
[3] 吴贇, 刘雅辉, 康茂东, 高海燕, 王俊, 孙宝德. K4169合金循环加载过程中的微观组织演变[J]. 金属学报, 2020, 56(9): 1185-1194.
[4] 秦高梧, 谢红波, 潘虎成, 任玉平. 一类介于晶体与准晶体之间的有序结构[J]. 金属学报, 2018, 54(11): 1490-1502.
[5] 李振亮,刘飞,袁爱萍,段宝玉,李晓伟,李一鸣. 轧制变形对喷射沉积含Nd镁合金织构及LPSO相的影响*[J]. 金属学报, 2016, 52(8): 938-944.
[6] 李克俭,蔡志鹏,李轶非,潘际銮. FB2马氏体耐热钢中Laves相在焊接过程中演化行为的研究*[J]. 金属学报, 2016, 52(6): 641-648.
[7] 马坪, 吴二冬, 李武会, 孙凯, 陈东风. Ti0.7Zr0.3(Cr1-xVx)2合金的结构和贮氢性能*[J]. 金属学报, 2014, 50(4): 454-462.
[8] 王学, 于淑敏, 任遥遥, 刘洪, 刘洪伟, 胡磊. P92钢时效的Laves相演化行为[J]. 金属学报, 2014, 50(10): 1195-1202.
[9] 王学, 李勇, 任遥遥, 刘洪伟, 刘洪, 王伟. Laves相析出对P92钢合金元素再分布的影响[J]. 金属学报, 2014, 50(10): 1203-1209.
[10] 张麦仓,曹国鑫,董建新,郑磊,姚志浩. 基于经典动态模型的GH4169合金钢锭中Laves相的回溶规律分析[J]. 金属学报, 2013, 49(3): 372-378.
[11] 盛立远,章炜,赖琛,郭建亭,奚廷斐,叶恒强. 快速凝固制备Laves相增强NiAl基复合材料的微观组织及力学性能[J]. 金属学报, 2013, 49(11): 1318-1324.
[12] 潘智平,李双明,徐磊,傅恒志. 定向凝固Cu-10.25%Mg过共晶合金中初生Laves相Cu2Mg枝晶三维形貌[J]. 金属学报, 2013, 49(1): 92-100.
[13] 李晓诚 丁雨田 胡勇. Tb0.3Dy0.7Fe1.95-xTix (x=0, 0.03, 0.06, 0.09) 合金的微观组织与磁致伸缩性能[J]. 金属学报, 2012, 48(1): 11-15.
[14] 李克伟 李双明 傅恒志. 电弧熔炼态Laves相Cr2Nb/Cr合金的微观组织演变[J]. 金属学报, 2011, 47(6): 663-670.
[15] 彭志方 蔡黎胜 彭芳芳 胡永平 陈方玉. P92钢625℃持久性能分段特征与各段中M23C6及Laves相相参数的定量变化研究[J]. 金属学报, 2010, 46(4): 429-434.