Please wait a minute...
Acta Metall Sin  2006, Vol. 42 Issue (9): 959-964     DOI:
Research Articles Current Issue | Archive | Adv Search |
STUDY OF IN VITRO ANTICOAGULANT PROPERTY OF THE La ADDED MEDICAL 316L STAINLESS STEEL
Yang Huajuan;Yang Ke; Zhang Bingchun
中国科学院金属研究所
Cite this article: 

Yang Huajuan; Yang Ke; Zhang Bingchun. STUDY OF IN VITRO ANTICOAGULANT PROPERTY OF THE La ADDED MEDICAL 316L STAINLESS STEEL. Acta Metall Sin, 2006, 42(9): 959-964 .

Download:  PDF(325KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The in vitro anticoagulant property of a medical grade 316L stainless steel with 0.05% La addition was systematically studied. The results showed that, compared with the conventionally used medical 316L stainless steel, the La added 316L steel possesses less platelets adhesion and less activation of the platelets, and their kinetic clotting time and the plasma recalcification time become longer, which reveals that the activation extent of the latter on intrinsic coagulation factors is smaller than the former and the anticoagulant property of the latter is better. Through measurement of the contact angles of the steels, and calculations of the surface tension of the steels and the interfacial tension between the steels and the blood, the anticoagulant mechanism of the steels was analyzed from the viewpoint of surface energy.
Key words:  medical 316L stainless steel      La      anticoagulant property      
Received:  04 January 2006     
ZTFLH:  R318.08  
  TG142.71  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2006/V42/I9/959

[1]Disegi J A,Eschbach L.Injury,2000;31:S-D2
[2]Morais S,Sousa J P,Fernandes M H,Carvalho G S,de Bruijn J D,van Blitterswijk C A.Biomaterials,1998;19:999
[3]Morais S,Pereira M C.J Trace Elem Med Biol,2000;14:48
[4]K(?)ster R,Vieluf D,Kiehn M,Sommerauer M,K(?)hler J,Baldus S,Meinertz T,Hamm C W.Lancet,2000;356:1895
[5]Leitao E,Silva R A,Barbosa M A.J Mater Sci:Mater
??Med,1997;8:365
[6]Haiduc I,Silvestru C.Coord Chem Rev,1990;99:253
[7]Wang K,Li R C,Cheng Y,Zhu B.Coord Chem Rev,1999;190-192:297
[8]Kostova I,Manolov I,Nicolova I,konstantinov S,Karaivanova M.Eur J Med Chem,2001;36:339
[9]Wang L M,Lin Q,Ji J W,Lan D N.J Alloys Compd,2006;408-412:384
[10]Liu T Y,Lin W C,Huang L Y,Chen S Y,Yang M C.Biomaterials,2005;26:1437
[11]Huang N,Yang P,Cheng X,Leng Y X,Zheng X L,Cai G J,Zhen Z H,Zhang F,Chen Y R,Liu X H,Xi T F.Biomaterials,1998;19:771
[12]Hao H P.Biological Evaluation Standard and Actualize Directory of Medical Instrument.Beijing:Standards Press of China,2000:92
(郝和平.医疗器械生物学评价标准实施指南.北京:中国标准出版社,2000:92)
[13]Guo Z Y,Zhang Y S,Zhang H J.Chin Rare Earths,1997;18(1):61
(郭战勇,张宇生,张宏江.稀土,1997;18(1):61)
[14]Liu X T,Li R.,Chen J Y,Wang K.J Chin Rare Earths Soc,2000;18:88
(刘湘陶,李榕,陈景云,王(?).中国稀土学报,2000;18:88)
[15]Dee K C,Puleo D A,Bizios R.An Introduction to Tissue-Biomaterial Interactions.Hoboken,NJ:John Wiley & Sons,Inc.,2002
[16]Hong J,Azens A,Ekdahl K N,Granqvist C G,Nilsson B.Biomaterials,2005;26:1397
[17]Yang MJ,Zhou C F,Le Y L.J Biomed Eng,1990;7:59
(杨明京,周成飞,乐以伦.生物医学工程学杂志,1990;7:59)
[18]Cui F Z,Feng Q L.Biomaterials Science.Beijing:Tsinghua University Press,2004:244
(崔福斋,冯庆玲.生物材料学.北京:清华大学出版社,2004:244)
[19]Rupprecht S,Bloch A,Rosiwal S,Neukam F W,Wiltfang J.Int J Oral Maxillofac Implants,2002;17:778
[20]Hao L,Lawrence J,Li L.Appl Surf Sci,2005;247:453
[21]Fu R K Y,Mei Y F,Wan G J,Siu G G,Chu P K,Huang Y X,Tian X B,Yang S Q,Chen J Y.Surf Sci,2004;573:426
[22]Kaelble D H,Moacanin J.Polymer,1977;18:475
[23]Agathopoulos S,Nikolopoulos P.J Biomed Mater Res,1995;29:421
[24]Andrade J D.Med Instrum,1973;7:110
[25]Ruckenstein E,Gourisankar S V.J Colloid Interface Sci,1984;101:4
[1] CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[2] BI Zhongnan, QIN Hailong, LIU Pei, SHI Songyi, XIE Jinli, ZHANG Ji. Research Progress Regarding Quantitative Characterization and Control Technology of Residual Stress in Superalloy Forgings[J]. 金属学报, 2023, 59(9): 1144-1158.
[3] LI Jiarong, DONG Jianmin, HAN Mei, LIU Shizhong. Effects of Sand Blasting on Surface Integrity and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy[J]. 金属学报, 2023, 59(9): 1201-1208.
[4] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[5] MU Yahang, ZHANG Xue, CHEN Ziming, SUN Xiaofeng, LIANG Jingjing, LI Jinguo, ZHOU Yizhou. Modeling of Crack Susceptibility of Ni-Based Superalloy for Additive Manufacturing via Thermodynamic Calculation and Machine Learning[J]. 金属学报, 2023, 59(8): 1075-1086.
[6] XU Yongsheng, ZHANG Weigang, XU Lingchao, DAN Wenjiao. Simulation of Deformation Coordination and Hardening Behavior in Ferrite-Ferrite Grain Boundary[J]. 金属学报, 2023, 59(8): 1042-1050.
[7] ZHANG Haifeng, YAN Haile, FANG Feng, JIA Nan. Molecular Dynamic Simulations of Deformation Mechanisms for FeMnCoCrNi High-Entropy Alloy Bicrystal Micropillars[J]. 金属学报, 2023, 59(8): 1051-1064.
[8] LIU Wei, CHEN Wanqi, MA Menghan, LI Kailun. Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion[J]. 金属学报, 2023, 59(8): 986-1000.
[9] SI Yongli, XUE Jintao, WANG Xingfu, LIANG Juhua, SHI Zimu, HAN Fusheng. Effect of Cr Addition on the Corrosion Behavior of Twinning-Induced Plasticity Steel[J]. 金属学报, 2023, 59(7): 905-914.
[10] ZHANG Lu, YU Zhiwei, ZHANG Leicheng, JIANG Rong, SONG Yingdong. Thermo-Mechanical Fatigue Cycle Damage Mechanism and Numerical Simulation of GH4169 Superalloy[J]. 金属学报, 2023, 59(7): 871-883.
[11] SUN Rongrong, YAO Meiyi, WANG Haoyu, ZHANG Wenhuai, HU Lijuan, QIU Yunlong, LIN Xiaodong, XIE Yaoping, YANG Jian, DONG Jianxin, CHENG Guoguang. High-Temperature Steam Oxidation Behavior of Fe22Cr5Al3Mo-xY Alloy Under Simulated LOCA Condition[J]. 金属学报, 2023, 59(7): 915-925.
[12] WANG Zongpu, WANG Weiguo, Rohrer Gregory S, CHEN Song, HONG Lihua, LIN Yan, FENG Xiaozheng, REN Shuai, ZHOU Bangxin. {111}/{111} Near Singular Boundaries in an Al-Zn-Mg-Cu Alloy Recrystallized After Rolling at Different Temperatures[J]. 金属学报, 2023, 59(7): 947-960.
[13] LI Qian, LIU Kai, ZHAO Tianliang. Rust Formation Behavior and Mechanism of Q235 Carbon Steel in 5%NaCl Salt Spray Under Elastic Tensile Stress[J]. 金属学报, 2023, 59(6): 829-840.
[14] HOU Juan, DAI Binbin, MIN Shiling, LIU Hui, JIANG Menglei, YANG Fan. Influence of Size Design on Microstructure and Properties of 304L Stainless Steel by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 623-635.
[15] ZHANG Dongyang, ZHANG Jun, LI Shujun, REN Dechun, MA Yingjie, YANG Rui. Effect of Heat Treatment on Mechanical Properties of Porous Ti55531 Alloy Prepared by Selective Laser Melting[J]. 金属学报, 2023, 59(5): 647-656.
No Suggested Reading articles found!