Please wait a minute...
Acta Metall Sin  2005, Vol. 41 Issue (11): 1159-1166     DOI:
Research Articles Current Issue | Archive | Adv Search |
α-Cr precipitation behavior and its effect on high Cr-containing superalloys
DONG Jianxin; XIE Xishan
Department of Superalloy and Application; University of Science and Technology Beijing
Cite this article: 

DONG Jianxin; XIE Xishan. α-Cr precipitation behavior and its effect on high Cr-containing superalloys. Acta Metall Sin, 2005, 41(11): 1159-1166 .

Download:  PDF(846KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Theα-Cr precipitation behavior and its effects on the different Cr-containing superalloys, such as GH169, GH625, GH648 and two high-Cr tested alloys, were investigated by microstructure analysis approach in order to compare their behavior and optimize theα-Cr phase morphology. The results show that noα-Cr phase was observed after a standard heat treatment but with long-term aging theα-Cr phase precipitates and grows usually clinging to δ phase in GH169 alloy and clinging to M6C carbide andδphase in GH625 alloy. However, for high Cr-containing alloys (Cr>30%, GH648 and two tested alloys), the α-Cr phase with various morphologies precipitates directly from austenitic matrix and from short-plate to long acicular and lamellar shape. Furthermore, the optimization of α-Cr phase was initially studied by a special heat treatment in order to obtain fine and uniform α-Cr particles.
Key words:  superalloy      high Cr--containing alloy      GH648      
Received:  30 June 2005     
ZTFLH:  O642  
  TG132.32  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2005/V41/I11/1159

[1] Radavich J F. Proc Superalloys 718, 6SS and Various Derivative, Pennsylvania, USA: TMS, 1997: 409
[2] Jiang X C, Yoshimura T. J Electrochem Soc, 1992; 139: 1001
[3] Ustinovshikov Y. Acta Mater, 1996; 44: 5021
[4] Wu C W, Dong J X, Zhang M C, Wang G L, Xie X S. Acta Metall Sin, 2001; 37: 1174 (吴翠微,董建新,张麦仓,王改莲,谢锡善.金属学报,2001; 37:1174)
[5] Xie X S, Dong J X, Zhang M C, Wang G L. Proc Adv Mater Process Gas Turbines, USA: TMS, 2003: 134
[6] Xie X S, Dong J X, Smith G D, Patel S, Radavich J F. Proc Long Term Stability High Temp Mater, USA: TMS, 1999: 135
[7] Wang G L, Wu C W, Zhang M C, Dong J X, Xie X S. Mater Sci Eng, 2003; A358: 71
[8] Dong J X, Zhang M C, Zeng Y P, Xie X S. Acta. Metall Sin (Engl Lett), 2005; 18: 164
[9] Radavich J. Proc Superalloy 718, 625, 706 and Various Derivatives, USA: TMS, 1996: 409
[10] Dong J X, Zhang M C, Zeng Y P, Xie X S. J Univ Sci Technol Beijing, 2002; 24: 186 (董建新,张麦仓,曾燕屏.谢锡善.北京科技大学学报,2002; 24:186)
[11] Shen G, Radavich J, Xie X, Lingdsley B. Proc Superalloy 2000, USA: TMS, 2001: 445
[12] Wang G L, Wu C W, Zhang M C, Dong J X, Xie X S. Rare Met Mater Eng, 2002; 31: 37 (王改莲,吴翠微,张麦仓,董建新,谢锡善.稀有金属材料与 工程,2002;31:37)
[13] Lindsley B, Pierron X, Maurer G. Proc Long Time Stability High Temp Mater, USA: TMS, 1999: 123
[14] Shen G., Radavich J, Xie X, Lindsley B. Proc Superalloy 2000, USA: TMS, 2001: 445
[15] Gale W F, Abdo Z A M, Nemani R V. J Mater Sci, 1999; 34: 407
[16] Ustinovshikov Y. Acta Mater, 1996; 44: 5021
[17] Marucco A. Mater Sci Eng, 1995; A194: 225.
[1] MA Dexin, ZHAO Yunxing, XU Weitai, WANG Fu. Effect of Gravity on Directionally Solidified Structure of Superalloys[J]. 金属学报, 2023, 59(9): 1279-1290.
[2] CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[3] LI Jiarong, DONG Jianmin, HAN Mei, LIU Shizhong. Effects of Sand Blasting on Surface Integrity and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy[J]. 金属学报, 2023, 59(9): 1201-1208.
[4] FENG Qiang, LU Song, LI Wendao, ZHANG Xiaorui, LI Longfei, ZOU Min, ZHUANG Xiaoli. Recent Progress in Alloy Design and Creep Mechanism of γ'-Strengthened Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1125-1143.
[5] ZHANG Jian, WANG Li, XIE Guang, WANG Dong, SHEN Jian, LU Yuzhang, HUANG Yaqi, LI Yawei. Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1109-1124.
[6] GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[7] BAI Jiaming, LIU Jiantao, JIA Jian, ZHANG Yiwen. Creep Properties and Solute Atomic Segregation of High-W and High-Ta Type Powder Metallurgy Superalloy[J]. 金属学报, 2023, 59(9): 1230-1242.
[8] JIANG He, NAI Qiliang, XU Chao, ZHAO Xiao, YAO Zhihao, DONG Jianxin. Sensitive Temperature and Reason of Rapid Fatigue Crack Propagation in Nickel-Based Superalloy[J]. 金属学报, 2023, 59(9): 1190-1200.
[9] LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[10] BI Zhongnan, QIN Hailong, LIU Pei, SHI Songyi, XIE Jinli, ZHANG Ji. Research Progress Regarding Quantitative Characterization and Control Technology of Residual Stress in Superalloy Forgings[J]. 金属学报, 2023, 59(9): 1144-1158.
[11] ZHENG Liang, ZHANG Qiang, LI Zhou, ZHANG Guoqing. Effects of Oxygen Increasing/Decreasing Processes on Surface Characteristics of Superalloy Powders and Properties of Their Bulk Alloy Counterparts: Powders Storage and Degassing[J]. 金属学报, 2023, 59(9): 1265-1278.
[12] ZHAO Peng, XIE Guang, DUAN Huichao, ZHANG Jian, DU Kui. Recrystallization During Thermo-Mechanical Fatigue of Two High-Generation Ni-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1221-1229.
[13] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[14] LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[15] MU Yahang, ZHANG Xue, CHEN Ziming, SUN Xiaofeng, LIANG Jingjing, LI Jinguo, ZHOU Yizhou. Modeling of Crack Susceptibility of Ni-Based Superalloy for Additive Manufacturing via Thermodynamic Calculation and Machine Learning[J]. 金属学报, 2023, 59(8): 1075-1086.
No Suggested Reading articles found!