Please wait a minute...
Acta Metall Sin  2020, Vol. 56 Issue (7): 1036-1046    DOI: 10.11900/0412.1961.2019.00401
Current Issue | Archive | Adv Search |
First-Principles Calculation on the Influence of Alloying Elements on Interfacial Features of W-Cu System
GAI Yibing, TANG Fawei, HOU Chao, LU Hao, SONG Xiaoyan()
Key Laboratory of Advanced Functional Materials, Education Ministry of China, College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China
Cite this article: 

GAI Yibing, TANG Fawei, HOU Chao, LU Hao, SONG Xiaoyan. First-Principles Calculation on the Influence of Alloying Elements on Interfacial Features of W-Cu System. Acta Metall Sin, 2020, 56(7): 1036-1046.

Download:  HTML  PDF(2492KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

The W-Cu alloy has been widely applied in metallurgy, electronics, military and other fields because of its good arc-resistance, anti-welding, heat and electricity conducting etc. In the recent years, attention to the immiscible W-Cu alloy has been shifted to the problem of stabilizing the W/Cu interface by alloying. However, there are still research lacks of the mechanisms of diffusion, segregation of alloying elements in this alloy. It, obviously, will limit the further optimizing design for the W-Cu alloy. This work is focused on the first-principle study of the electronic structure of W/Cu interfaces. Calculations showed that the same alloying elements in W-Cu system may have significant differences in grain boundary segregation and interface segregation behavior, and related micromechanism was revealed. It was demonstrated that the relationship of the segregation energies of Sc, Ti, Y and In into W/Cu interfaces and grain boundaries of pure W and Cu were related to their stability. The correlation between segregation energy and interface stability was also disclosed by the first-principle interface calculation for W-Sc and W-Y systems. Further, combined with the solute segregation calculations for the W/Cu interfaces, W grain boundaries, Cu grain boundaries and the formation energy for the Cu solid solution, the criterion for solute optimizing selection for the W-Cu system was proposed. According to which, Y was selected as the candidate alloying element to stabilize the W/Cu interface. This work proposed a more universal method for the optimal alloying element selection and may provide a new design method for the development of high-performance W-Cu alloy.

Key words:  first-principle      W-Cu composite material      solute segregation      interfacial characteristic     
Received:  25 November 2019     
ZTFLH:  TG131  
Fund: National Key Research and Development Program of China(2018YFB0703902);National Natural Science Foundation of China(51631002);National Funds for Distinguished Young Scholars(51425101)

URL: 

https://www.ams.org.cn/EN/10.11900/0412.1961.2019.00401     OR     https://www.ams.org.cn/EN/Y2020/V56/I7/1036

Fig.1  Schematics of segregation models for grain boundaries and interface in W-Cu system
(a) W grain boundary (b) Cu grain boundary (c) W/Cu interface
Bond typeMulliken populationBond length / nm
Cu—W0.250.256
Cu—Cu0.10~0.700.256~0.266
W—W0.90~1.800.266~0.300
Table 1  Mulliken populations and bond lengths correspo-nding to various bonds in the W(111)/Cu(111) interface model
Fig.2  Local density of states (LDOSs) (a), local charge density (LCD) distribution (b) and local charge density difference (LCDD) distribution (c) of W and Cu atoms in the W(111)/Cu(111) interface model (E—energy)
Fig.3  Segregation behavior of solute elements into the W side and Cu side at the W/Cu interface (ΔEseg—segregation energy)
Fig.4  Segregation energies of different elements at three sites of W (a) and Cu (b) grain boundaries (1, 2, 3 represent different sites in Fig.1)
Fig.5  The local charge densities and local charge density differences of In element after segregation into Cu interface (a), W side of W/Cu interface (b) and Cu side of W/Cu interface (c)
Fig.6  Model diagrams and population analyses of Sc and Y elements at the W grain boundary before and after segregation
(a) before Y segregation (b) after Y segregation (c) before Sc segregation (d) after Sc segregation
Fig.7  LDOSs of W1 and W3 before Sc segregation (a), W1 and Sc after Sc segregation (b), W1 and W3 before Y segregation (c), W1 and Y after Y segregation (d) in Fig.6
Fig.8  Distributions of local charge density (left) and local charge density difference (right) of Sc element in W grain boundary
(a) before Sc segregation (b) after Sc segregation
ElementEW/Cu / eVEW / eVECu / eVEform / eV
Sc-0.68-0.84-1.15-0.26
Ti-0.370.09-0.670.21
Y-0.82-2.17-1.790.89
In-0.82-1.46-0.800.53
Table 2  Properties of alloying elements in W-Cu system
[1] Elsayed A, Li W, El Kady O A, et al. Experimental investigations on the synthesis of W-Cu nanocomposite through spark plasma sintering [J]. J. Alloys Compd., 2015, 639: 373
[2] Liang S H, Chen L, Yuan Z X, et al. Infiltrated W-Cu composites with combined architecture of hierarchical particulate tungsten and tungsten fibers [J]. Mater. Charact., 2015, 110: 33
[3] Wei X X, Tang J C, Ye N, et al. A novel preparation method for W-Cu composite powders [J]. J. Alloys Compd., 2016, 661: 471
doi: 10.1016/j.jallcom.2015.11.158
[4] Zhou Q, Chen P W. Fabrication of W-Cu composite by shock consolidation of Cu-coated W powders [J]. J. Alloys Compd., 2016, 657: 215
[5] Calvo M, Jakus A E, Shah R N, et al. Microstructure and processing of 3D printed tungsten microlattices and infiltrated W-Cu composites [J]. Adv. Eng. Mater., 2018, 20: 1800354
[6] Chen W G, Dong L L, Zhang H, et al. Microstructure characterization of W-Cu alloy sheets produced by high temperature and high pressure deformation technique [J]. Mater. Lett., 2017, 205: 198
[7] Li L Y, Li J S, He Y X, et al. Tensile properties and deformation micromechanism of Ti-based metallic glass composite containing impurity elements [J]. J. Alloys Compd., 2019, 784: 220
[8] Li L L, Saber M, Xu W Z, et al. High-temperature grain size stabilization of nanocrystalline Fe-Cr alloys with Hf additions [J]. Mater. Sci. Eng., 2014, A613: 289
[9] Chen P G, Shen Q, Luo G Q, et al. The mechanical properties of W-Cu composite by activated sintering [J]. Int. J. Refract. Met. Hard Mater., 2013, 36: 220
[10] Chen P G, Luo G Q, Shen Q, et al. Thermal and electrical properties of W-Cu composite produced by activated sintering [J]. Mater. Des., 2013, 46: 101
[11] Li Y, Zhang J, Luo G Q, et al. Densification and properties investigation of W-Cu composites prepared by electroless-plating and activated sintering [J]. Int. J. Refract. Met. Hard Mater., 2018, 71: 255
[12] Borji S, Ahangarkani M, Zangeneh-Madar K, et al. The effect of sintering activator on the erosion behavior of infiltrated W-10wt% Cu composite [J]. Int. J. Refract. Met. Hard Mater., 2017, 66: 150
[13] Chookajorn T, Murdoch H A, Schuh C A. Design of stable nanocrystalline alloys [J]. Science, 2012, 337: 951
pmid: 22923577
[14] Kawazoe Y. How well can physical, chemical, and mechanical properties of materials be predicted by ab initio techniques? [J]. Mater. Des., 2001, 22: 61
[15] Braithwaite J S, Rez P. Grain boundary impurities in iron [J]. Acta Mater., 2005, 53: 2715
[16] Yamaguchi M, Kaburaki H, Shiga M. Energetics of segregation and embrittling potency for non-transition elements in the Ni Σ5(012) symmetrical tilt grain boundary: A first-principles study [J]. J. Phys.: Condens. Mater., 2004, 16: 3933
[17] Liang C P, Fan J L, Gong H R. Cohesion strength and atomic structure of W-Cu graded interfaces [J]. Fusion Eng. Des., 2017, 117: 20
[18] Terakura K, Oguchi T, Mohri T, et al. Electronic theory of the alloy phase stability of Cu-Ag, Cu-Au, and Ag-Au systems [J]. Phys. Rev., 1987, 35B: 2169
[19] Jiang D Y. First-principles study on mechanical properties of tungsten alloys for plasma facing materials [D]. Nanchang: Nanchang University, 2017
(姜迪友. 面向等离子体材料钨合金力学性质的第一性原理研究 [D]. 南昌: 南昌大学, 2017)
[20] Wu X B, You Y W, Kong X S, et al. First-principles determination of grain boundary strengthening in tungsten: Dependence on grain boundary structure and metallic radius of solute [J]. Acta Mater., 2016, 120: 315
[21] Zhou H B, Jin S, Zhang Y, et al. Effects of hydrogen on a tungsten grain boundary: A first-principles computational tensile test [J]. Prog. Nat. Sci.: Mater. Int., 2011, 21: 240
[22] Ahangarkani M, Borji S, Zangeneh-Madar K, et al. Mutual relationship between material removal rate and W-W interfacial features during ultra-high temperature erosion of infiltrated W-10wt.% Cu composite [J]. Int. J. Refract. Met. Hard Mater., 2018, 75: 191
[23] Tang F W, Liu X M, Wang H B, et al. Solute segregation and thermal stability of nanocrystalline solid solution systems [J]. Nanoscale, 2019, 11: 1813
pmid: 30631871
[24] Chookajorn T, Schuh C A. Nanoscale segregation behavior and high-temperature stability of nanocrystalline W-20 at.% Ti [J]. Acta Mater., 2014, 73: 128
[25] Chookajorn T, Park M, Schuh C A. Duplex nanocrystalline alloys: entropic nanostructure stabilization and a case study on W-Cr [J]. J. Mater. Res., 2015, 30: 151
[26] Wang Q, Tang F W, Hou C, et al. First-principles calculations of solute-segreagtion of W-In alloys at grain boundaries [J]. Acta Phys. Sin., 2019, 68: 077101
(王 奇, 唐法威, 侯 超等. W-In体系溶质晶界偏聚行为的第一性原理计算 [J]. 物理学报, 2019, 68: 077101)
[27] Zhu Y D, Yan M F, Zhang Y X, et al. First-principles investigation of structural, mechanical and electronic properties for Cu-Ti intermetallics [J]. Comput. Mater. Sci., 2016, 123: 70
[28] Scheiber D, Pippan R, Puschnig P, et al. Ab initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten [J]. Modell. Simul. Mater. Sci., 2016, 24: 085009
[29] Scheiber D, Pippan R, Puschnig P, et al. Ab-initio search for cohesion-enhancing solute elements at grain boundaries in molybdenum and tungsten [J]. Int. J. Refract. Met. Hard Mater., 2016, 60: 75
[30] Seyring M, Song X Y, Rettenmayr M. Advance in orientation microscopy: Quantitative analysis of nanocrystalline structures [J]. ACS Nano, 2011, 5: 2580
pmid: 21375327
[31] Tang F W, Song X Y, Hou C, et al. Modeling of Li diffusion in nanocrystalline Li-Si anode material [J]. Phys. Chem. Chem. Phys., 2018, 20: 7132
pmid: 29479582
[32] Kronberg M L, Wilson F H. Secondary recrystallization in copper [J]. JOM, 1949, 1(8): 501
[33] He W H, Gao X, Pang L L, et al. First-principles investigation of vacancies in LiTaO3 [J]. J. Phys.: Condens. Mater., 2016, 28: 315501
doi: 10.1088/0953-8984/28/31/315501
[34] Wang X M, Qin X G. The influence of 5 tilt grain boundaries of copper nanoparticles on sintering behavior [J]. Chin. J. Stereol. Image Anal., 2016, 21: 279
(王晓勉, 秦湘阁. 5晶界对铜纳米颗粒烧结行为的影响 [J]. 中国体视学与图像分析, 2016, 21: 279)
[35] Yang G Y, Liu Y, Hang Z Q, et al. Adhesion at cerium doped metal-ceramic α-Fe/WC interface: A first-principles calculation [J]. J. Rare Earth., 2019, 37: 773
doi: 10.1016/j.jre.2018.11.009
[36] Jaouen M, Pacaud J, Jaouen C. Elastic strains and enhanced stress relaxation effects induced by ion irradiation in W(110)/Cu(111) multilayers: Comparative EXAFS and X-ray diffraction studies [J]. Phys. Rev., 2001, 64B: 144106
[37] Segall M D, Lindan P J D, Probert M J, et al. First-principles simulation: Ideas, illustrations and the CASTEP code [J]. J. Phys.: Condens. Mater., 2002, 14: 2717
doi: 10.1088/0953-8984/14/11/301
[38] Vanderbilt D. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism [J]. Phys. Rev., 1990, 41B: 7892
[39] Perdew J P, Burke K, Ernzerhof M. Generalized gradient approximation made simple [J]. Phys. Rev. Lett., 1996, 77: 3865
doi: 10.1103/PhysRevLett.77.3865 pmid: 10062328
[40] Li Z W, Kong X S, Liu C S, et al. Segregation of alloying atoms at a tilt symmetric grain boundary in tungsten and their strengthening and embrittling effects [J]. Chin. Phys., 2014, 23B: 106107
[41] Scheiber D, Razumovskiy V I, Puschnig P, et al. Ab initio description of segregation and cohesion of grain boundaries in W-25 at.% Re alloys [J]. Acta Mater., 2015, 88: 180
doi: 10.1016/j.actamat.2014.12.053
[42] Wolverton C, Ozoliņš V, Asta M. Hydrogen in aluminum: First-principles calculations of structure and thermodynamics [J]. Phys. Rev., 2004, 69B: 144109
[1] LI Xin, JIANG He, YAO Zhihao, DONG Jianxin. Theoretical Calculation and Analysis of the Effect of Oxygen Atom on the Grain Boundary of Superalloy Matrices Ni, Co and NiCr[J]. 金属学报, 2023, 59(2): 309-318.
[2] REN Shihao, LIU Yongli, MENG Fanshun, QI Yang. Strain-Engineered Semiconductor to Semimetallic Transition and Its Mechanism in Bi(111) Film[J]. 金属学报, 2022, 58(7): 911-920.
[3] WANG Shuo, WANG Junsheng. Structural Evolution and Stability of the δ′/θ′/δ′ Composite Precipitate in Al-Li Alloys: A First-Principles Study[J]. 金属学报, 2022, 58(10): 1325-1333.
[4] ZHAO Yuhong, JING Jianhui, CHEN Liwen, XU Fanghong, HOU Hua. Current Research Status of Interface of Ceramic-Metal Laminated Composite Material for Armor Protection[J]. 金属学报, 2021, 57(9): 1107-1125.
[5] MAO Fei, LU Hao, TANG Fawei, GUO Kai, LIU Dong, SONG Xiaoyan. First-Principle Calculation on the Effect of Mn and In on the Structural Stability and Magnetic Moment of SmCo7 Alloys[J]. 金属学报, 2021, 57(7): 948-958.
[6] CUI Yang, LI Shouhang, YING Tao, BAO Hua, ZENG Xiaoqin. Research on the Thermal Conductivity of Metals Based on First Principles[J]. 金属学报, 2021, 57(3): 375-384.
[7] ZHANG Haijun, QIU Shi, SUN Zhimei, HU Qingmiao, YANG Rui. First-Principles Study on Free Energy and Elastic Properties of Disordered β-Ti1-xNbx Alloy: Comparison Between SQS and CPA[J]. 金属学报, 2020, 56(9): 1304-1312.
[8] GAO Xiang, ZHANG Guikai, XIANG Xin, LUO Lizhu, WANG Xiaolin. Effects of Alloying Elements on the Adsorption of Oxygen on V(110) Surfaces: A First-Principles Study[J]. 金属学报, 2020, 56(6): 919-928.
[9] Jing BAI, Shaofeng SHI, Jinlong WANG, Shuai WANG, Xiang ZHAO. First-Principles Calculations of Phase Stability and Magnetic Properties of Ni-Mn-Ga-Ti FerromagneticShape Memory Alloys[J]. 金属学报, 2019, 55(3): 369-375.
[10] Caihong DONG, Yongli LIU, Yang QI. Effect of Thickness on the Surface and Electronic Properties of Bi Film[J]. 金属学报, 2018, 54(6): 935-942.
[11] Yuchao FENG, Weiwei XING, Shoulong WANG, Xingqiu CHEN, Dianzhong LI, Yiyi LI. First-Principles Study of Hydrogen Behaviors at Oxide/Ferrite Interface in ODS Steels[J]. 金属学报, 2018, 54(2): 325-338.
[12] Huiyuan WANG, Hang ZHANG, Xinyu XU, Min ZHA, Cheng WANG, Pinkui MA, Zhiping GUAN. Current Research and Future Prospect on Microstructure Stability of Superplastic Light Alloys[J]. 金属学报, 2018, 54(11): 1618-1624.
[13] Huijin TAO,Shan ZHOU,Yu LIU,Jian YIN,Hao XU. Point Defect Concentrations and Interactions in D019-Ti3Al from First-Principles Calculations[J]. 金属学报, 2017, 53(6): 751-759.
[14] Jing BAI,Ze LI,Zhen WAN,Xiang ZHAO. A First-Principles Study on Crystal Structure, Phase Stability and Magnetic Properties of Ni-Mn-Ga-Cu Ferromagnetic Shape Memory Alloys[J]. 金属学报, 2017, 53(1): 83-89.
[15] Yong LI,Guohuai LIU,Zhaodong WANG,Tianliang FU,Xinzhong LI,Yanqing SU,Jingjie GUO,Hengzhi FU. MICROSTRUCTURE EVOLUTION AND SOLUTE SEGREGATION IN DIRECTIONALLY SOLIDIFIED TiAl ALLOYS WITH HIGH Nb CONTENT[J]. 金属学报, 2015, 51(8): 957-966.
No Suggested Reading articles found!