Please wait a minute...
Acta Metall Sin  2023, Vol. 59 Issue (4): 547-555    DOI: 10.11900/0412.1961.2022.00551
Research paper Current Issue | Archive | Adv Search |
Combustion Behavior of GH4061 Alloy in High Pressure and Oxygen-Enriched Atmosphere
CAO Shuting1,2, ZHANG Shaohua1(), ZHANG Jian1()
1Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
2School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China
Cite this article: 

CAO Shuting, ZHANG Shaohua, ZHANG Jian. Combustion Behavior of GH4061 Alloy in High Pressure and Oxygen-Enriched Atmosphere. Acta Metall Sin, 2023, 59(4): 547-555.

Download:  HTML  PDF(2250KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Liquid oxygen (LOX)/kerosene rocket engines are the main power system of heavy launch vehicles around the globe, and the turbine materials are usually exposed to elevated temperatures, high pressure, and oxygen-enriched environment in gas generators. Metal combustion may occur under these working conditions. GH4061 is a newly developed Ni-based superalloy that is used in turbine materials because of its excellent mechanical properties. However, its combustion resistance property has rarely been studied. Recently, several studies on metal combustion have been conducted, but they mainly focus on exploring the rules of metal combustion. Furthermore, the domestically promoted ignition-combustion (PIC) experiment equipment only supports the test under 2 MPa pressure, which has significantly limited the study of metal combustion at higher pressure. Therefore, the analysis of the metal combustion mechanism remains incomplete. In this study, the 3.5-25 MPa high pressure and oxygen-enriched combustion experiments of GH4061 alloy were performed on the basis of independently-developed PIC equipment with a maximum pressure of 25 MPa. A high-speed camera was used to observe and record the combustion process. The postcombustion microstructure was characterized using SEM and EDS, and the combustion product was identified using XRD. The length and rate of burning increase as the oxygen pressure increases. The critical burning pressure of GH4061 under 99.5% oxygen (when igniting at 25oC) is about 5 MPa, according to ASTM-G124. After testing, the transition zone, melting zone, ignition interface, and oxide zone in the samples were characterized. The burning process is due to elements with a higher heat of combustion. During combustion, lower-density molten oxides float up to the melting zone. After testing, small O/Al/Ti-rich particles and large complex oxide particles with dendritic morphology were observed in the melting zone. The effect of oxygen pressure was analyzed using thermodynamics.

Key words:  metal combustion      high pressure      oxygen-enriched      superalloy      combustion mechanism     
Received:  31 October 2022     
ZTFLH:  TG146.15  
Fund: National Natural Science Foundation of China(52150233);Key Research Program of Chinese Academy of Sciences(ZDRW-CN-2021-2-1)
Corresponding Authors:  ZHANG Jian, professor, Tel: (024)23971196, E-mail: jianzhang@imr.ac.cn;ZHANG Shaohua, associate professor, Tel: (024)23748882, E-mail: zhangshaohua@imr.ac.cn

URL: 

https://www.ams.org.cn/EN/10.11900/0412.1961.2022.00551     OR     https://www.ams.org.cn/EN/Y2023/V59/I4/547

Fig.1  Experimental setup in PIC test chamber (a) and comparison of samples before and after combustion at different pressures (Inset shows the combustion zone) (b)
Fig.2  High-speed camera images of combustion process of GH4061 alloy in 3.5 MPa PIC test (PIC—promoted ignition-combustion)
(a, b) ignite the promoter (c-h) a burn-drop cycle (i-k) the end of burning
Fig.3  Length remaining (a) and burning rate (V) (b) of GH4061 alloys after PIC test at different pressures (P) (R2—correlation coefficient)
Fig.4  Cross sectional microstructures of combustion zone of GH4061 alloy after combustion at 7 MPa
(a) original alloy, transition zone, and melting zone (b) fine dendrites in transition zone (c) melting zone
Fig.5  Morphology and EDS elements distribution in oxide zone of combustion zone for GH4061 alloy after combustion at 7 MPa
Fig.6  Morphologies of spherical oxides in melting zone of combustion zone for GH4061 alloy after combustion at 7 MPa
(a) melting zone (b) large (> 6 μm) spherical oxide
(c) details in large spherical oxide (d) small (< 6 μm) spherical oxides
Fig.7  XRD spectra of combustion products of GH4061 alloys after combustion at 3.5, 7, and 25 MPa
ElementHeat ofOxideMelting
combustiondensitypoint
kJ·mol-1g·cm-3K
Al8423.50 (Al2O3)2327
Ti9124.26 (TiO2)2113
V7523.35 (V2O5)963
Cr5655.21 (Cr2O3)2708
Nb9674.47 (Nb2O3)1758
Fe3645.18 (Fe3O4)1867
Mo7514.69 (MoO3)1068
Ni2406.67 (NiO)2253
Cu1596.32 (CuO)1599
Table 1  Heat of combustion of metal elements, and density and melting point of their oxides[2]
Fig.8  Schematics of combustion process of GH4061 alloy (x1—thickness of melting zone, x2—thickness of oxide zone, T1—flame temperature, T2—combustion front temperature, T3—transition zone temperature)
(a) combustion start (b) generation and movement of oxides (c) combustion stop
Fig.9  lnKΘ as a function of T,andcomparison of lnKΘ and lnJ within the experimental pressure range of O2 (inset) of combustion reaction for GH4061 alloy (KΘ—equilibrium constant, J—pressure quotient, T—temperature around the flame)
1 Huang J F, Zhao G P, Jiao L Y, et al. Combustion failure analysis of GH202 and GH586 superalloys for rocket engine [J]. J. Iron Steel Res., 2005, 17(3): 68
黄进峰, 赵光普, 焦兰英 等. 火箭发动机用合金GH202和GH586燃烧事故分析 [J]. 钢铁研究学报, 2005, 17(3): 68
2 Grosse A V, Conway J B. Combustion of metals in oxygen [J]. Ind. Eng. Chem., 1958, 50: 663
doi: 10.1021/ie50580a040
3 Tekumalla S, Gupta M. An insight into ignition factors and mechanisms of magnesium based materials: A review [J]. Mater. Des., 2017, 113: 84
doi: 10.1016/j.matdes.2016.09.103
4 Shao L, Xie G L, Liu X H, et al. Combustion behaviour and mechanism of a Cu-Ni-Mn alloy in an oxygen enriched atmosphere [J]. Corros. Science., 2020, 163: 108253
doi: 10.1016/j.corsci.2019.108253
5 Yoffe P. The burning of metals [J]. Proc. Roy. Soc., 1961, 261A: 357
6 Monroe R W, Bates C E, Pears C D. Metal combustion in high-pressure flowing oxygen [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres [C]. Phoenix: ASTM, 1983: 126
7 Hill P R. High temperature oxidation and ignition of metals [R]. Washington: National Advisory Committee for Aeronautics, 1956
8 Stradling J S, Pippen D L, Frye G W. Techniques employed by the NASA White Sands Test Facility to ensure oxygen system component safety [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres [C]. Phoenix: ASTM, 1983: 97
9 Neary R M. ASTM G 63: A milestone in a 60-year safety effort [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres [C]. Phoenix: ASTM, 1983: 3
10 Million J F, Samant A, Zawierucha R, et al. Promoted ignition-combustion behavior of cobalt and nickel alloys in oxygen-enriched atmospheres [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: 12th Volume [C]. Berlin: ASTM, 2009: 10
11 American Society for Testing Material. Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres [S]. West Conshohocken: ASTM International, 2010
12 Benz F J, Shaw R C, Homa J M. Burn propagation rates of metals and alloys in gaseous oxygen [A]. The Symposium on Compatibility and Sensitivity of Materials in Oxygen-Enriched Atmospheres:Second Volume [C]. Washington: ASTM, 1986: 135
13 Zawierucha R, Million J F. Promoted ignition-combustion behavior of engineering alloys at elevated temperatures and pressures in oxygen gas mixtures [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume [C]. Las Cruces: ASTM, 1989: 145
14 American Society for Testing Material. Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres [S]. West Conshohocken: ASTM International, 2018
15 Zabrenski J S, Werley B L, Slusser J W. Pressurized flammability limits of metals [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume [C]. Las Cruces: ASTM, 1989: 178
16 Sircar S, Stoltzfus J, Bryan C, et al. Promoted combustion of pure metals in oxygen-enriched atmospheres [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Seventh Volume [C]. Denver: ASTM, 1995: 100
17 Zawierucha R, Robert K, Mazzarella R B. Promoted ignition-combustion behavior of selected hastelloys in oxygen gas mixtures [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fifth Volume [C]. Cocoa Beach: ASTM 1989: 270
18 Bryan C J, Stoltzfus J M, Gunaji M V. An assessment of the flammability hazard of several corrosion resistant metal alloys [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Sixth Volume [C]. Noordwijk: ASTM, 1993: 112
19 Stoltzfus J M, Homa J M, Williams R E, et al. ASTM committee G-4 metals flammability test program data and discussion [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume [C]. Churchill College: ASTM, 1987: 33
20 Benz F, Steinberg T A, Janoff D. Combustion of 316 stainless steel in high-pressure gaseous oxygen [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume [C]. Las Cruces: ASTM, 1989: 195
21 Gunaji M V, Sircar S, Beeson H D. Ignition and combustion of titanium and titanium alloys [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Seventh Volume [C]. Denver: ASTM, 1995: 81
22 Janoff D, Pedley M D. Configurational effects on the combustion of several alloy systems in oxygen-enriched atmospheres [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eighth Volume [C]. West Conshohocken: ASTM, 1997: 147
23 Huang J F, Yu H Y, Li Y B, et al. Oxidation characteristic and mechanism of superalioys in oxygen-enriched atmosphere [J]. J. Iron Steel Res., 2009, 21(3): 51
doi: 10.1016/S1006-706X(14)60120-5
黄进峰, 余红燕, 李永兵 等. 富氧气氛下高温合金氧化特征及机理 [J]. 钢铁研究学报, 2009, 21(3): 51
24 Shi L F, Huang J F, Zhao G P, et al. Research on combustion characteristics and properties of superailoy in high-pressure and oxygen-enriched atmosphere [J]. Hot Working Tech., 2007, 36(4): 26
施立发, 黄进峰, 赵光普 等. 高压富氧下几种高温合金的燃烧特征和性能研究 [J]. 热加工工艺, 2007, 36(4): 26
25 Wang H L, Huang J F, Lian Y, et al. Combustion behavior of GH4169 and GH4202 superalloys in oxygen-enriched atmosphere [J]. Chin. J. Eng., 2016, 38: 1288
王宏亮, 黄进峰, 连 勇 等. 高温合金GH4169与GH4202在富氧气氛中的燃烧行为 [J]. 工程科学学报, 2016, 38: 1288
26 He Y W. Study on the effect and mechanism of V, Cu in a new Ni-Cr-Fe-Nb superalloy [D]. Shenyang: Northeastern University, 2016
贺玉伟. V、Cu在新型Ni-Cr-Fe-Nb高温合金中的作用机理研究 [D]. 沈阳: 东北大学, 2016
27 American Society for Testing Material. Standard Guide for Evaluating Metals for Oxygen Service [S]. West Conshohocken: ASTM International, 2014
28 Bransford J W. Ignition and combustion temperatures determined by laser heating [A]. The Symposium on Compatibility and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Second Volume [C]. Washington: ASTM, 1986: 78
29 Steinberg T A, Wilson D B, Benz F J. Microgravity and normal gravity combustion of metals and alloys in high pressure oxygen [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Sixth Volume [C]. Noordwijk: ASTM, 1993: 136
30 Fueki K. T-G diagram and its applications to high temperature oxidation of pure metals [J]. Denkikagaku, 1958, 26: 292
31 Engel C D, Herald S D, Davis S E. Promoted metals combustion at ambient and elevated temperatures [A]. The Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eleventh Volume [C]. Washington: ASTM, 2006: 62
32 Hirano T, Sato K, Sato Y, et al. Prediction of metal fire spread in high-pressure oxygen [J]. Combust. Sci. Technol., 1983, 32: 137
doi: 10.1080/00102208308923656
33 Hirano T, Sato Y, Sato K, et al. The rate determining process of iron oxidation at combustion in high pressure oxygen [J]. Oxid. Commun., 1984, 6: 113
[1] MA Dexin, ZHAO Yunxing, XU Weitai, WANG Fu. Effect of Gravity on Directionally Solidified Structure of Superalloys[J]. 金属学报, 2023, 59(9): 1279-1290.
[2] CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[3] BAI Jiaming, LIU Jiantao, JIA Jian, ZHANG Yiwen. Creep Properties and Solute Atomic Segregation of High-W and High-Ta Type Powder Metallurgy Superalloy[J]. 金属学报, 2023, 59(9): 1230-1242.
[4] GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[5] ZHAO Peng, XIE Guang, DUAN Huichao, ZHANG Jian, DU Kui. Recrystallization During Thermo-Mechanical Fatigue of Two High-Generation Ni-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1221-1229.
[6] FENG Qiang, LU Song, LI Wendao, ZHANG Xiaorui, LI Longfei, ZOU Min, ZHUANG Xiaoli. Recent Progress in Alloy Design and Creep Mechanism of γ'-Strengthened Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1125-1143.
[7] ZHANG Jian, WANG Li, XIE Guang, WANG Dong, SHEN Jian, LU Yuzhang, HUANG Yaqi, LI Yawei. Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1109-1124.
[8] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[9] LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
[10] JIANG He, NAI Qiliang, XU Chao, ZHAO Xiao, YAO Zhihao, DONG Jianxin. Sensitive Temperature and Reason of Rapid Fatigue Crack Propagation in Nickel-Based Superalloy[J]. 金属学报, 2023, 59(9): 1190-1200.
[11] ZHENG Liang, ZHANG Qiang, LI Zhou, ZHANG Guoqing. Effects of Oxygen Increasing/Decreasing Processes on Surface Characteristics of Superalloy Powders and Properties of Their Bulk Alloy Counterparts: Powders Storage and Degassing[J]. 金属学报, 2023, 59(9): 1265-1278.
[12] LI Jiarong, DONG Jianmin, HAN Mei, LIU Shizhong. Effects of Sand Blasting on Surface Integrity and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy[J]. 金属学报, 2023, 59(9): 1201-1208.
[13] BI Zhongnan, QIN Hailong, LIU Pei, SHI Songyi, XIE Jinli, ZHANG Ji. Research Progress Regarding Quantitative Characterization and Control Technology of Residual Stress in Superalloy Forgings[J]. 金属学报, 2023, 59(9): 1144-1158.
[14] LIU Xingjun, WEI Zhenbang, LU Yong, HAN Jiajia, SHI Rongpei, WANG Cuiping. Progress on the Diffusion Kinetics of Novel Co-based and Nb-Si-based Superalloys[J]. 金属学报, 2023, 59(8): 969-985.
[15] MU Yahang, ZHANG Xue, CHEN Ziming, SUN Xiaofeng, LIANG Jingjing, LI Jinguo, ZHOU Yizhou. Modeling of Crack Susceptibility of Ni-Based Superalloy for Additive Manufacturing via Thermodynamic Calculation and Machine Learning[J]. 金属学报, 2023, 59(8): 1075-1086.
No Suggested Reading articles found!