Please wait a minute...
Acta Metall Sin  2009, Vol. 45 Issue (7): 815-819    DOI:
论文 Current Issue | Archive | Adv Search |
EFFECT OF P CONTENT ON MECHANICAL PROPERTIES OF FINE--GRAINED GH761 ALLOY
YANG Shulin1;2; SUN Wenru1; WANG Jianxi2; WANG Keliang2; GUO Shouren1; HU Zhuangqi1
1) Institute of Metal Research; Chinese Academy of Sciences; Shenyang 110016
2) Shenyang Liming Aero-engine Group Corporation; Shenyang 110043
Cite this article: 

YANG Shulin SUN Wenru WANG Jianxi WANG Keliang GUO Shouren HU Zhuangqi. EFFECT OF P CONTENT ON MECHANICAL PROPERTIES OF FINE--GRAINED GH761 ALLOY. Acta Metall Sin, 2009, 45(7): 815-819.

Download:  PDF(904KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  

Effect of P content on the microstructure and mechanical properties of fine--grained GH761 alloy was studied. The results showed that no obvious effect on the tensile properties of fine--grained GH761 alloy was observed when P content in GH761 alloy was below 0.040% (mass fraction). However, P influenced the stress rupture and creep properties greatly. The peak value of the life at 650 ℃and 690 MPa appeared around 0.023%P. In comparison with that of the alloy with 0.0007%P, the life increased more than 2 times. At the same time, the creep rate of the alloy with 0.023%P is also the lowest in all of alloys. P is beneficial to the mechanical properties of fine--grained GH761 alloy by improving the precipitation at grain boundaries and impeding the disclocation movement. The overall properties of GH761 alloy can be improved by grain refining and appropriate amount of P addition.

Key words:  GH761 alloy      P      grain refining      mechanical property     
Received:  08 January 2008     
ZTFLH: 

TG146.1

 
  TG113.2

 
Fund: 

Supported by National Natural Science Foundation of China (Nos.50271072 and 50471083)

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2009/V45/I7/815

[1] Yang S L, Sun W R, Guo S R, Wei Z G, Yang H C, Hu Z Q. J Aeronaut Mater, 2006; 26(4): 1
(杨树林, 孙文儒, 郭守仁, 魏志刚, 杨洪才, 胡壮麒. 航空材料学报, 2006; 26(4): 1)

[2] Yang S L. PhD Thesis, Northeastern University, Shenyang, 2006
(杨树林. 东北大学博士学位论文, 沈阳, 2006)

[3] Li N, Guo S R, Lu D Z, Sun W R, Meng X N, Hu Z Q. Acta Metall Sin, 2003; 39: 1255
(李娜, 郭守仁, 卢德忠, 孙文儒, 孟晓娜, 胡壮麒. 金属学报, 2003; 39: 1255)

[4] Sun W R, Guo S R, Meng X N, Li N, Hu Z Q. Acta Metall Sin, 2004; 40: 477
(孙文儒, 郭守仁, 孟晓娜, 李娜, 胡壮麒. 金属学报, 2004; 40: 477)

[5] Sun W R. PhD Thesis, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 1996
(孙文儒. 中国科学院金属研究所博士学位论文, 沈阳, 1996)

[6] Cao W D, Kennedy R L. In: Loria E A ed., Superalloys 718, 625, 706 and Various Derivatives, Warrendale, PA: TMS–AIME, 1994: 463
[7] Hu Z Q, Sun W R, Guo S R. Acta Metall Sin (Engl Lett), 1996; 9: 443
[8] SunWR, Guo S R, Lee J H, Park N K, Yoo Y S, Choe S J, Hu Z Q. Mater Sci Eng, 1998; A247: 137
[9] Sun W R, Guo S R, Lu D Z, Hu Z Q. Metall Mater Trans, 1997; 28A: 649
[10] Yang S L, SunWR, Guo S R, Wei Z G, Yang H C, Hu Z Q. Acta Metall Sin, 2005, 41: 1249
(杨树林, 孙文儒, 郭守仁, 魏志刚, 杨洪才, 胡壮麒. 金属学报, 2005; 41: 1249)

[1] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189.
[2] JIANG He, NAI Qiliang, XU Chao, ZHAO Xiao, YAO Zhihao, DONG Jianxin. Sensitive Temperature and Reason of Rapid Fatigue Crack Propagation in Nickel-Based Superalloy[J]. 金属学报, 2023, 59(9): 1190-1200.
[3] BAI Jiaming, LIU Jiantao, JIA Jian, ZHANG Yiwen. Creep Properties and Solute Atomic Segregation of High-W and High-Ta Type Powder Metallurgy Superalloy[J]. 金属学报, 2023, 59(9): 1230-1242.
[4] FENG Qiang, LU Song, LI Wendao, ZHANG Xiaorui, LI Longfei, ZOU Min, ZHUANG Xiaoli. Recent Progress in Alloy Design and Creep Mechanism of γ'-Strengthened Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1125-1143.
[5] ZHANG Jian, WANG Li, XIE Guang, WANG Dong, SHEN Jian, LU Yuzhang, HUANG Yaqi, LI Yawei. Recent Progress in Research and Development of Nickel-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1109-1124.
[6] MA Dexin, ZHAO Yunxing, XU Weitai, WANG Fu. Effect of Gravity on Directionally Solidified Structure of Superalloys[J]. 金属学报, 2023, 59(9): 1279-1290.
[7] CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[8] ZHAO Peng, XIE Guang, DUAN Huichao, ZHANG Jian, DU Kui. Recrystallization During Thermo-Mechanical Fatigue of Two High-Generation Ni-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1221-1229.
[9] BI Zhongnan, QIN Hailong, LIU Pei, SHI Songyi, XIE Jinli, ZHANG Ji. Research Progress Regarding Quantitative Characterization and Control Technology of Residual Stress in Superalloy Forgings[J]. 金属学报, 2023, 59(9): 1144-1158.
[10] ZHENG Liang, ZHANG Qiang, LI Zhou, ZHANG Guoqing. Effects of Oxygen Increasing/Decreasing Processes on Surface Characteristics of Superalloy Powders and Properties of Their Bulk Alloy Counterparts: Powders Storage and Degassing[J]. 金属学报, 2023, 59(9): 1265-1278.
[11] GONG Shengkai, LIU Yuan, GENG Lilun, RU Yi, ZHAO Wenyue, PEI Yanling, LI Shusuo. Advances in the Regulation and Interfacial Behavior of Coatings/Superalloys[J]. 金属学报, 2023, 59(9): 1097-1108.
[12] DU Jinhui, BI Zhongnan, QU Jinglong. Recent Development of Triple Melt GH4169 Alloy[J]. 金属学报, 2023, 59(9): 1159-1172.
[13] LI Jiarong, DONG Jianmin, HAN Mei, LIU Shizhong. Effects of Sand Blasting on Surface Integrity and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy[J]. 金属学报, 2023, 59(9): 1201-1208.
[14] ZHANG Leilei, CHEN Jingyang, TANG Xin, XIAO Chengbo, ZHANG Mingjun, YANG Qing. Evolution of Microstructures and Mechanical Properties of K439B Superalloy During Long-Term Aging at 800oC[J]. 金属学报, 2023, 59(9): 1253-1264.
[15] LU Nannan, GUO Yimo, YANG Shulin, LIANG Jingjing, ZHOU Yizhou, SUN Xiaofeng, LI Jinguo. Formation Mechanisms of Hot Cracks in Laser Additive Repairing Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1243-1252.
No Suggested Reading articles found!