Please wait a minute...
Acta Metall Sin  2008, Vol. 44 Issue (8): 897-900     DOI:
Research Articles Current Issue | Archive | Adv Search |
ELEMENTAL PARTITIONING CHARACTERISTICS AND STABILITY OF EQUILIBRIUM PHASES DURING 450-1200℃ IN T/P91 HEAT-RESISTANT STEEL
Chun-guang Kuai;Zhifang Peng
武汉大学动力与机械学院材料工程系
Cite this article: 

Chun-guang Kuai; Zhifang Peng. ELEMENTAL PARTITIONING CHARACTERISTICS AND STABILITY OF EQUILIBRIUM PHASES DURING 450-1200℃ IN T/P91 HEAT-RESISTANT STEEL. Acta Metall Sin, 2008, 44(8): 897-900 .

Download:  PDF(481KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Chemical compositions and amounts of equilibrium phases in T/P91 heat resistant steel in the temperature range of 450℃ ~ 1200℃ have been calculated by using thermodynamic software ‘Thermo-Calc’. Concept of elemental partitioning fraction is introduced to study the elemental partitioning characteristics of such main alloying elements as Cr, Mo, Fe, V, Nb, C and N, the stability, the constituents and the evolutional rule of the equilibrium phases at elevated temperatures. The results show that using the elemental partitioning characteristics with the change of temperatures the stability of the equilibrium phases can be easily revealed, and the sub-types of MX and the formation of M and X in MX, and the elemental evolution rule in MX type phases can be reasonably determined, and as well as the effect of carbon content in the matrix phase on the formation of MX phases can be helpfully understood, respectively.
Key words:  Heat-Resistant Steel T/P91      Thermo-Calc      thermodynamic calculation      elemental partitioning fraction      pha     
Received:  10 October 2007     
ZTFLH:  TG146.1  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2008/V44/I8/897

[1]Race J M,Bhadeshia H K D H.Mater Sci Technol,1992; 8:875
[2]Furtado H C,de Almeida L H,Le M I.Mater Charact, 2007;58:72
[3]Kropa A,V■rostkováA,Svoboda M,Janovec J.Acta Mater,1998;46:39
[4]Taneike M,Sawada K,Abe F.Metall Mater Trans,2004; 35A:1255
[5]Yamada K,Igarashi M,Muneki S,Abe F.ISIJ Int,2002; 42:779
[6]Sawada K,Ohba T,Kushima H,Kimura K.Mater Sci Eng,2005;A394:36
[7]Marinkovic B A,de Avillez R R.Mater Res,2002;5:491
[8]HomolováV,Janovec J,Záhumensk■P,V■rostková A. Mater Sci Eng,2003;A349:306
[9]Abe F.Metall Mater Trans,2005;36A:321
[10]Peng Z F,Ren Y Y.Acta Metall Sin,2001;37:472 (彭志方,任遥遥.金属学报,2001;37:472)
[11]Peng Z F,Ren Y Y.Metall Mater Trans,2002;33A:3065
[12]Cheng S G,Peng Z F,Cheng F Y,Ren Y Y.Rare Met Mater Eng,2006;35:1765 (陈盛广,彭志方,陈方玉,任遥遥.稀有金属材料与工程,2006;35:1765)
[13]Andersson J O,Helander T,Hdghmd L,Shi P F,Sundman B.Calphad,2002;26:273
[14]Sawada K,Kubo K,Abe F.Mater Sci Eng,2001;A319- 321:784
[15]Maruyama K,Sawada K,Koike J.ISIJ Int,2001;41:641
[16]Abe F,Horiuchi T,Taneike M,Sawada K.Mater Sci Eng, 2004;A378:299
[17]Taneike M,Abe F,Sawada K.Nature,2003;424:17
[18]Abe F,Taneike M,Sawada K.Int J Pressure Vessels Pip- ing,2007;84:3
[1] BAI Jiaming, LIU Jiantao, JIA Jian, ZHANG Yiwen. Creep Properties and Solute Atomic Segregation of High-W and High-Ta Type Powder Metallurgy Superalloy[J]. 金属学报, 2023, 59(9): 1230-1242.
[2] CHEN Jia, GUO Min, YANG Min, LIU Lin, ZHANG Jun. Effects of W Concentration on Creep Microstructure and Property of Novel Co-Based Superalloys[J]. 金属学报, 2023, 59(9): 1209-1220.
[3] MU Yahang, ZHANG Xue, CHEN Ziming, SUN Xiaofeng, LIANG Jingjing, LI Jinguo, ZHOU Yizhou. Modeling of Crack Susceptibility of Ni-Based Superalloy for Additive Manufacturing via Thermodynamic Calculation and Machine Learning[J]. 金属学报, 2023, 59(8): 1075-1086.
[4] LI Fulin, FU Rui, BAI Yunrui, MENG Lingchao, TAN Haibing, ZHONG Yan, TIAN Wei, DU Jinhui, TIAN Zhiling. Effects of Initial Grain Size and Strengthening Phase on Thermal Deformation and Recrystallization Behavior of GH4096 Superalloy[J]. 金属学报, 2023, 59(7): 855-870.
[5] YUAN Jianghuai, WANG Zhenyu, MA Guanshui, ZHOU Guangxue, CHENG Xiaoying, WANG Aiying. Effect of Phase-Structure Evolution on Mechanical Properties of Cr2AlC Coating[J]. 金属学报, 2023, 59(7): 961-968.
[6] LI Qian, LIU Kai, ZHAO Tianliang. Rust Formation Behavior and Mechanism of Q235 Carbon Steel in 5%NaCl Salt Spray Under Elastic Tensile Stress[J]. 金属学报, 2023, 59(6): 829-840.
[7] FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti2AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786.
[8] ZHAO Yafeng, LIU Sujie, CHEN Yun, MA Hui, MA Guangcai, GUO Yi. Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture[J]. 金属学报, 2023, 59(5): 611-622.
[9] LI Qian, SUN Xuan, LUO Qun, LIU Bin, WU Chengzhang, PAN Fusheng. Regulation of Hydrogen Storage Phase and Its Interface in Magnesium-Based Materials for Hydrogen Storage Performance[J]. 金属学报, 2023, 59(3): 349-370.
[10] ZHANG Limin, LI Ning, ZHU Longfei, YIN Pengfei, WANG Jianyuan, WU Hongjing. Macrosegregation Mechanism of Primary Silicon Phase in Cast Hypereutectic Al-Si Alloys Under Alternating Electropulsing[J]. 金属学报, 2023, 59(12): 1624-1632.
[11] CHEN Kaixuan, LI Zongxuan, WANG Zidong, Demange Gilles, CHEN Xiaohua, ZHANG Jiawei, WU Xuehua, Zapolsky Helena. Morphological Evolution of Fe-Rich Precipitates in a Cu-2.0Fe Alloy During Isothermal Treatment[J]. 金属学报, 2023, 59(12): 1665-1674.
[12] MA Guonan, ZHU Shize, WANG Dong, XIAO Bolv, MA Zongyi. Aging Behaviors and Mechanical Properties of SiC/Al-Zn-Mg-Cu Composites[J]. 金属学报, 2023, 59(12): 1655-1664.
[13] WANG Chongyang, HAN Shiwei, XIE Feng, HU Long, DENG Dean. Influence of Solid-State Phase Transformation and Softening Effect on Welding Residual Stress of Ultra-High Strength Steel[J]. 金属学报, 2023, 59(12): 1613-1623.
[14] ZHANG Kaiyuan, DONG Wenchao, ZHAO Dong, LI Shijian, LU Shanping. Effect of Solid-State Phase Transformation on Stress and Distortion for Fe-Co-Ni Ultra-High Strength Steel Components During Welding and Vacuum Gas Quenching Processes[J]. 金属学报, 2023, 59(12): 1633-1643.
[15] QI Xiaoyong, LIU Wenbo, HE Zongbei, WANG Yifan, YUN Di. Phase-Field Simulation of the Densification Process During Sintering of UN Nuclear Fuel[J]. 金属学报, 2023, 59(11): 1513-1522.
No Suggested Reading articles found!