FINITE ELEMENT SIMULATION FOR CYCLIC DEFORMATION OF SiCP/6061Al ALLOY COMPOSITES

Acta Metall Sin

2006, Vol. 42

Issue (10): 1051-1055 DOI:

Research Articles

Current Issue | Archive | Adv Search

FINITE ELEMENT SIMULATION FOR CYCLIC DEFORMATION OF SiCP/6061Al ALLOY COMPOSITES

;

成都西南交通大学应用力学与工程系

Cite this article:

;. FINITE ELEMENT SIMULATION FOR CYCLIC DEFORMATION OF SiCP/6061Al ALLOY COMPOSITES. Acta Metall Sin, 2006, 42(10): 1051-1055 .

Download:

PDF(324KB)
Export: BibTeX | EndNote (RIS)

Abstract Based on the meso-mechanical model established for T6-treated SiCP/6061Al alloy composites, the monotonic tensile and uniaxial cyclic deformation behaviors of the composites were simulated numerically by using elastic-plastic finite element code ABAQUS; and then the simulated results were compared with the corresponding experiments in order to discuss the reasonability of the finite element simulation. It is shown that: since a newly developed cyclic constitutive model describing the ratcheting behavior reasonably is employed for T6-6061Al alloy matrix, the finite element model established in this work simulate the uniaxial cyclic deformation of the composites well, especially for the ratcheting behavior. It is also shown that the cyclic deformation of the composites is heterogeneous and complicated in meso-scale.

Key words: Metal matrix composites Particulate Cyclic deformation Ratcheting Finite element method

Received: 02 November 2005

ZTFLH:

TB331，O344.1

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2006/V42/I10/1051

[1]Ruggles M D,Krempl E.J Mech Phys Solids,1990;38:575
[2]Delobelle P,Robinet P,Bocher L.Int J Plast,1995;11:295
[3]Kobayashi M,Ohno N,Igari T.lnt J Plast,1998;14:355
[4]Kang G Z,Gao Q,Cai L X,Yang X J,Sun Y F.Acta Metall Sin,2000;36:497(康国政，高庆，蔡力勋，杨显杰，孙亚芳．金属学报，2000；35：497)
[5]Kang G Z,Gao Q,Yang X J.Int J Mech Sci,2002;44:1645
[6]Kang G Z,Gao Q,Cai L X,Sun Y F.Nucl Eng Des,2002;216:13
[7]Kang G Z,Sun Y F,Zhang J,Kan Q H.Acta Metall Sin,2005;41:277(康国政，孙亚芳，张娟，阚前华．金属学报，2005；41：277)
[8]Ohno N,Wang J D.Int J Plast,1993;9:375
[9]Chen X,Jiao R,Kim K S.Int J Plast,2005;21:161
[10]Chen X,Jiao R.Int J Plast,2004;20:871
[11]Han N L,Wang Z G,Yang J M,Zhang G D.Mater Sci Eng,2002;A337:140
[12]Srivatsan T S,Meslet A H,Vasudevan V K.Int J Fatigue,2005;27:357
[13]Han N L,Wang Z G,Zhang G D,Lui L.Mater Left,1999;38:70
[14]Xia Z,Ellyin F.Int J Fatigue,1998;20:51
[15]Han N L,Wang Z G,Wang W L,Zhang G D,Shi C X.Comps Sci Tech,1999;59(1):147
[16]Kang G Z,Liu Y J.Acta Metall Sin,2006;42:59(康国政，刘宇杰．金属学报，2006；42：59)
[17]Kang G Z.Mech Mater,2004;36:299
[18]Fleming W J,Temis J M.Int J Fatigue,2002;24:1079
[19]Kang G Z,Gao Q.Acta Mater Comps Sin,1999;16(1):35(康国政，高庆．复合材料学报，1999；16(1)：35)
[20]Zhang J,Gao Q,Kang G Z,Yang X J.Key Eng Mater,2005;297-300:1270
[21]Kang G Z,Gao Q.Composites,2002;33A:647h

[1]	ZHANG Lu, YU Zhiwei, ZHANG Leicheng, JIANG Rong, SONG Yingdong. Thermo-Mechanical Fatigue Cycle Damage Mechanism and Numerical Simulation of GH4169 Superalloy[J]. 金属学报, 2023, 59(7): 871-883.
[2]	LI Shaojie, JIN Jianfeng, SONG Yuhao, WANG Mingtao, TANG Shuai, ZONG Yaping, QIN Gaowu. Multimodal Microstructure of Mg-Gd-Y Alloy Through an Integrated Simulation of “Process-Structure-Property”[J]. 金属学报, 2022, 58(1): 114-128.
[3]	ZHU Shize, WANG Dong, WANG Quanzhao, XIAO Bolv, MA Zongyi. Influence of Cu Content on the Negative Effect of Natural Aging in SiC/Al-Mg-Si-Cu Composites[J]. 金属学报, 2021, 57(7): 928-936.
[4]	Xuexiong LI,Dongsheng XU,Rui YANG. Crystal Plasticity Finite Element Method Investigation of the High Temperature Deformation Consistency in Dual-Phase Titanium Alloy[J]. 金属学报, 2019, 55(7): 928-938.
[5]	CHEN Lei, HAO Shuo, ZOU Zongyuan, HAN Shuting, ZHANG Rongqiang, GUO Baofeng. Mechanical Characteristics of TRIP-Assisted Duplex Stainless Steel Fe-19.6Cr-2Ni-2.9Mn-1.6Si During Cyclic Deformation[J]. 金属学报, 2019, 55(12): 1495-1502.
[6]	Xuexi ZHANG, Zhong ZHENG, Ying GAO, Lin GENG. Progress in High Throughput Fabrication and Characterization of Metal Matrix Composites[J]. 金属学报, 2019, 55(1): 109-125.
[7]	Yongkui LI, Chunyi QUAN, Shanping LU, Qingyang JIAO, Shijian LI, Zhonghai SUN. STUDY ON SHAPE CORRECTION OF THE THIN PLATE OF TA15 TITANIUM ALLOY BY POST WELD HEAT TREATMENT[J]. 金属学报, 2016, 52(3): 281-288.
[8]	CHE Xin, LIANG Xingkui, CHEN Lili, CHEN Lijia, LI Feng. MICROSTRUCTURES AND LOW-CYCLE FATIGUE BEHAVIOR OF Al-9.0%Si-4.0%Cu-0.4%Mg(-0.3%Sc) ALLOY[J]. 金属学报, 2014, 50(9): 1046-1054.
[9]	ZHU Ruidong, DONG Wenchao, LIN Huaqiang, LU Shanping, LI Dianzhong. FINITE ELEMENT SIMULATION OF WELDING RESIDUAL STRESS FOR BUFFER BEAM OF CRH2A HIGH SPEED TRAIN[J]. 金属学报, 2014, 50(8): 944-954.
[10]	ZHANG Siqian, WU Wei, CHEN Lili, CHE Xin, CHEN Lijia. INFLUENCE OF HEAT TREATMENT ON LOW-CYCLE FATIGUE BEHAVIOR OF EXTRUDED Mg-7%Zn-0.6%Zr-0.5%Y ALLOY[J]. 金属学报, 2014, 50(6): 700-706.
[11]	LI Yongkui, CHEN Jundan, LU Shanping. RESIDUAL STRESS IN THE WHEEL OF 42CrMo STEEL DURING QUENCHING[J]. 金属学报, 2014, 50(1): 121-128.
[12]	CHANG Zhengkai, XIAO Jinquan, CHEN Yuqiu, LIU Shanchuan, GONG Jun, SUN Chao. STUDY ON DEPOSITION OF MAGNETIC FILMS USING ARC ION PLATING[J]. 金属学报, 2012, 48(5): 547-554.
[13]	JIANG Wenchun WOO Wanchuck WANG Bingying TU Shan–Tung . A STUDY OF RESIDUAL STRESS IN THE REPAIR WELD OF STAINLESS STEEL CLAD PLATE BY NEUTRON DIFFRACTION MEASUREMENT AND FINITE ELEMENT METHOD[J]. 金属学报, 2012, 48(12): 1525-1529.
[14]	LIU Xianghua. PROGRESS AND APPLICATION OF PLASTIC FINITE ELEMENT METHOD IN METALS ROLLING PROCESS[J]. 金属学报, 2010, 46(9): 1025-1033.
[15]	ZHANG Hongwei ZHANG Yidu WU Qiong. NUMERICAL SIMULATIONS OF SHOT-PEENING PROCESS AND IMPACT EFFECT[J]. 金属学报, 2010, 46(1): 111-117.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed