Acta Metall Sin  1998, Vol. 34 Issue (6): 597-602    DOI:

Current Issue | Archive | Adv Search |

GEOMETRICAL ANALYSIS ON PLASTIC DEFORMATION OF POLYCRYSTALLINE METALS AND THE ROOM TEMPERATURE PLASTICITY OF TOW-PHASE TiAl-BASE ALLOYS

LIANG Wei; YANG Dezhuang( Centre of Testing and Measuring; Taiyuan University of Technologyl Taiyuan 030024)( Harbin Institute of Technology; Harbin 150001)Comspondent: LIANG Wei; prodessor Tel: (0351)6010610 Fax: (0351)6041237

LIANG Wei; YANG Dezhuang( Centre of Testing and Measuring; Taiyuan University of Technologyl Taiyuan 030024)( Harbin Institute of Technology; Harbin 150001)Comspondent: LIANG Wei; prodessor Tel: (0351)6010610 Fax: (0351)6041237. GEOMETRICAL ANALYSIS ON PLASTIC DEFORMATION OF POLYCRYSTALLINE METALS AND THE ROOM TEMPERATURE PLASTICITY OF TOW-PHASE TiAl-BASE ALLOYS. Acta Metall Sin, 1998, 34(6): 597-602.

Abstract References Related Articles Recommended Metrics Download:  PDF(593KB)  Export:  BibTeX | EndNote (RIS)       Abstract  Geometrical analysis on plastic deformation charateristics of polycrystallineaggregates proved that the total length of dislocation lines that cat through a unit volume is ininverse proportion to the grain size under given deformation strains, while the total length ofdislocstion lines emitted per unit area of grain boundary is independent of grain size. Furthermore, the distortion of grain boundaries was proved to be propotion to the grain size. On thisbasis and combined with the analysis on the deformation mechanisms, the relationships betweenroom temperature elongation and grain size of two--phase Toil--base alloys were established asfollows: Key words:  polycrystalline      plastic deformation      deformation compatibility      grain size      dislocation density       Ti Al base alloy      tensile elongation      Received:  18 June 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I6/597 1 Mises V R. Z Augew Math Mech, 1928; 8: 161 2 Kelly A. Strong Solids . New York: Oxford University Press,1966: 82 3 Huang S C,Hall E L.Metoll Trans,1991;22A:427 4 Kim Y W, Dimiduck D M.J Mine Met Mater Soc, 1991; 43: 40 5 Liangg W,Li Q,Yang D Z.Acta Metall Sin (Engl Lett 1996;9:272 6 Chan K S,Kim Y W.Metall Trans ,1994;25A:1217 7 梁伟,李强,杨德庄 金属学报,1997;33:292 (Liang W, Li Q, Yang D Z. Acta Metall Sin, 1997; 33: 292) 8 陈明伟,林栋梁,陈达,石建东,邹敦叙,仲增墉 金属学报,1994;30:A416 (Chen M W, Lin D L, Chen D, Shi J D, Zou D X, Zhong Z Y. Acta Mentall Sin, 1994; 30: A416) 9 张继,张志宏.邹敦叙,仲增墉.金属学报,1996;32: 1044 (Zhang J, Zhang Z H, Zou D X, Zhong Z Y. Acta Metall Sin, 1996; 32: 1044) 10 Viswanathan G B, Vasuclevan V K. Scr Metall Matet 1995; 32: 1705 11 Li J C M,Chan Y T.Metall Trans .1970 ;1:1145 12 Chan K S, Kim Y W. Metall Trans, 1993; 24A: 113 13 Chan K S .Scr Metall Mater 1990 ;24::1725 14 Kim Y W.J Mine Met Mater Soc, 1994; 46: 30R [1] ZHANG Haifeng, YAN Haile, FANG Feng, JIA Nan. Molecular Dynamic Simulations of Deformation Mechanisms for FeMnCoCrNi High-Entropy Alloy Bicrystal Micropillars[J]. 金属学报, 2023, 59(8): 1051-1064. [2] LI Fulin, FU Rui, BAI Yunrui, MENG Lingchao, TAN Haibing, ZHONG Yan, TIAN Wei, DU Jinhui, TIAN Zhiling. Effects of Initial Grain Size and Strengthening Phase on Thermal Deformation and Recrystallization Behavior of GH4096 Superalloy[J]. 金属学报, 2023, 59(7): 855-870. [3] WAN Tao, CHENG Zhao, LU Lei. Effect of Component Proportion on Mechanical Behaviors of Laminated Nanotwinned Cu[J]. 金属学报, 2023, 59(4): 567-576. [4] GUO Xiangru, SHEN Junjie. Modelling of the Plastic Behavior of Cu Crystal with Twinning-Induced Softening and Strengthening Effects[J]. 金属学报, 2022, 58(3): 375-384. [5] REN Shaofei, ZHANG Jianyang, ZHANG Xinfang, SUN Mingyue, XU Bin, CUI Chuanyong. Evolution of Interfacial Microstructure of Ni-Co Base Superalloy During Plastic Deformation Bonding and Its Bonding Mechanism[J]. 金属学报, 2022, 58(2): 129-140. [6] YUAN Jiahua, ZHANG Qiuhong, WANG Jinliang, WANG Lingyu, WANG Chenchong, XU Wei. Synergistic Effect of Magnetic Field and Grain Size on Martensite Nucleation and Variant Selection[J]. 金属学报, 2022, 58(12): 1570-1580. [7] LIN Pengcheng, PANG Yuhua, SUN Qi, WANG Hangduo, LIU Dong, ZHANG Zhe. 3D-SPD Rolling Method of 45 Steel Ultrafine Grained Bar with Bulk Size[J]. 金属学报, 2021, 57(5): 605-612. [8] SHI Zengmin, LIANG Jingyu, LI Jian, WANG Maoqiu, FANG Zifan. In Situ Analysis of Plastic Deformation of Lath Martensite During Tensile Process[J]. 金属学报, 2021, 57(5): 595-604. [9] CAO Qingping, LV Linbo, WANG Xiaodong, JIANG Jianzhong. Magnetron Sputtering Metal Glass Film Preparation and the “Specimen Size Effect” of the Mechanical Property[J]. 金属学报, 2021, 57(4): 473-490. [10] ZHANG Shouqing, HU Xiaofeng, DU Yubin, JIANG Haichang, PANG Huiyong, RONG Lijian. Cross-Section Effect of Ni-Cr-Mo-B Ultra-Heavy Steel Plate for Offshore Platform[J]. 金属学报, 2020, 56(9): 1227-1238. [11] XU Zhanyi, SHA Yuhui, ZHANG Fang, ZHANG Huabing, LI Guobao, CHU Shuangjie, ZUO Liang. Orientation Selection Behavior During Secondary Recrystallization in Grain-Oriented Silicon Steel[J]. 金属学报, 2020, 56(8): 1067-1074. [12] HE Shuwen, WANG Minghua, BAI Qin, XIA Shuang, ZHOU Bangxin. Effect of TaC Content on Microstructure and Mechanical Properties of WC-TiC-TaC-Co Cemented Carbide[J]. 金属学报, 2020, 56(7): 1015-1024. [13] CHEN Yongjun, BAI Yan, DONG Chuang, XIE Zhiwen, YAN Feng, WU Di. Passivation Behavior on the Surface of Stainless Steel Reinforced by Quasicrystal-Abrasive via Finite Element Simulation[J]. 金属学报, 2020, 56(6): 909-918. [14] LI Yuancai, JIANG Wugui, ZHOU Yu. Effect of Nanopores on Tensile Properties of Single Crystal/Polycrystalline Nickel Composites[J]. 金属学报, 2020, 56(5): 776-784. [15] LI Yizhuang,HUANG Mingxin. A Method to Calculate the Dislocation Density of a TWIP Steel Based on Neutron Diffraction and Synchrotron X-Ray Diffraction[J]. 金属学报, 2020, 56(4): 487-493. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed