Acta Metall Sin  1998, Vol. 34 Issue (5): 449-454    DOI:

Current Issue | Archive | Adv Search |

THE RESIDUAL STRAIN, DISLOCATION AND TWIN IN Gr(C)/Mg COMPOSITE

WU Feng; ZHU Jing (School of Materials Science and Engineering; Tsinghua University; Beijing 100084)(Central Iron and Steel Research Institute; Beijing 100081)

WU Feng; ZHU Jing (School of Materials Science and Engineering; Tsinghua University; Beijing 100084)(Central Iron and Steel Research Institute; Beijing 100081). THE RESIDUAL STRAIN, DISLOCATION AND TWIN IN Gr(C)/Mg COMPOSITE. Acta Metall Sin, 1998, 34(5): 449-454.

Abstract References Related Articles Recommended Metrics Download:  PDF(2875KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The investigation on the microstructure of the residual strain, dislocation and twin nearby interfaces resulted from the thermal stress in Gr(C)/Mg composite has been carried out in this work. The dislocations sprout at interfaces between Gr(C) and the matrix and move towards matrix under the axial, radial and tangential stresses. There is a strain layer with a thickness of about 150 nm nearby the Gr(C) fiber, and the strain is concentrated in narrow areas of the matrix. The formation of twins occurs at one interface and usually ends at a neighbor interface. As the twin is thick, it may cause the neighbor interface apart. Key words:  Gr(C)/Mg composite      residual strain      dislocation      twin      Received:  18 May 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I5/449 1 Vogelsang M, Arsenault R J, Fisher R M. Metall Trans, 1986; 17A: 379 2 Arsenault R J, Wang L, Feng C R. Acta Metall Mater, 1991; 39. 47 3 Wang L, Arsenault R J. MateT Res Soc Symp Proc, 1991; 2l3. 1063 4 Taya M, Mori T. Acta Metall, 1987, 35. 155 5 Funk W, Blank E. Metall Trans, 1988, 19A: 987 6 Li Q, Megusar J, Masur L J, Cornie J A. Mater Sci Eng, 1989, A117: 199 7 Natt S R, Duva J M. Scr Metall, 1986; 20: 1055 8 Arsenault R J, Shi N. Mater Sci Eng, 1986, 81. 175 9 Wu F, Zhu J. Composite Science and Technology, to be published 10 Patankar S N, Sur Yanarayana C, B1ackketter D, Froes F H. J Mater Sci Lett, 1992; 11: 947 11 Kumar S, Singh R N. Acta Metall Mater, 1995; 43: 2417 12 Ickard S M, Mirac1e D B, Majumdar B S, Kendig K L, Rothenflue L, Coker D. Acta Metall Mater,1995; 43: 3105& [1] ZHAO Peng, XIE Guang, DUAN Huichao, ZHANG Jian, DU Kui. Recrystallization During Thermo-Mechanical Fatigue of Two High-Generation Ni-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1221-1229. [2] BAI Jiaming, LIU Jiantao, JIA Jian, ZHANG Yiwen. Creep Properties and Solute Atomic Segregation of High-W and High-Ta Type Powder Metallurgy Superalloy[J]. 金属学报, 2023, 59(9): 1230-1242. [3] ZHANG Zhefeng, LI Keqiang, CAI Tuo, LI Peng, ZHANG Zhenjun, LIU Rui, YANG Jinbo, ZHANG Peng. Effects of Stacking Fault Energy on the Deformation Mechanisms and Mechanical Properties of Face-Centered Cubic Metals[J]. 金属学报, 2023, 59(4): 467-477. [4] SHAO Xiaohong, PENG Zhenzhen, JIN Qianqian, MA Xiuliang. Unravelling the {\mathrm{10}\overline{\mathrm{1}}\mathrm{2}} Twin Intersection Between LPSO Structure/SFs in Magnesium Alloy[J]. 金属学报, 2023, 59(4): 556-566. [5] WAN Tao, CHENG Zhao, LU Lei. Effect of Component Proportion on Mechanical Behaviors of Laminated Nanotwinned Cu[J]. 金属学报, 2023, 59(4): 567-576. [6] HAN Weizhong, LU Yan, ZHANG Yuheng. Mechanism of Ductile-to-Brittle Transition in Body-Centered-Cubic Metals：A Brief Review[J]. 金属学报, 2023, 59(3): 335-348. [7] HAN Dong, ZHANG Yanjie, LI Xiaowu. Effect of Short-Range Ordering on the Tension-Tension Fatigue Deformation Behavior and Damage Mechanisms of Cu-Mn Alloys with High Stacking Fault Energies[J]. 金属学报, 2022, 58(9): 1208-1220. [8] GAO Dong, ZHOU Yu, YU Ze, SANG Baoguang. Selection of Twin Variants in Dynamic Plastic Deformation of Pure Ti at Liquid Nitrogen Temperature[J]. 金属学报, 2022, 58(9): 1141-1149. [9] ZHOU Hongwei, GAO Jianbing, SHEN Jiaming, ZHAO Wei, BAI Fengmei, HE Yizhu. Twin Boundary Evolution Under Low-Cycle Fatigue of C-HRA-5 Austenitic Heat-Resistant Steel at High Temperature[J]. 金属学报, 2022, 58(8): 1013-1023. [10] ZHENG Shijian, YAN Zhe, KONG Xiangfei, ZHANG Ruifeng. Interface Modifications on Strength and Plasticity of Nanolayered Metallic Composites[J]. 金属学报, 2022, 58(6): 709-725. [11] TIAN Ni, SHI Xu, LIU Wei, LIU Chuncheng, ZHAO Gang, ZUO Liang. Effect of Pre-Tension on the Fatigue Fracture of Under-Aged 7N01 Aluminum Alloy Plate[J]. 金属学报, 2022, 58(6): 760-770. [12] GAO Chuan, DENG Yunlai, WANG Fengquan, GUO Xiaobin. Effect of Creep Aging on Mechanical Properties of Under-Aged 7075 Aluminum Alloy[J]. 金属学报, 2022, 58(6): 746-759. [13] CHEN Yang, MAO Pingli, LIU Zheng, WANG Zhi, CAO Gengsheng. Detwinning Behaviors and Dynamic Mechanical Properties of Precompressed AZ31 Magnesium Alloy Subjected to High Strain Rates Impact[J]. 金属学报, 2022, 58(5): 660-672. [14] GUO Xiangru, SHEN Junjie. Modelling of the Plastic Behavior of Cu Crystal with Twinning-Induced Softening and Strengthening Effects[J]. 金属学报, 2022, 58(3): 375-384. [15] WU Xiaolei, ZHU Yuntian. Heterostructured Metallic Materials: Plastic Deformation and Strain Hardening[J]. 金属学报, 2022, 58(11): 1349-1359. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed