Acta Metall Sin  1994, Vol. 30 Issue (4): 170-175    DOI:

Current Issue | Archive | Adv Search |

DETERMINATION OF FATIGUE RELIABILITY UNDER COMPLEX LOADING

HAN Yumei; HAN Enhou;KE Wei (State Key Laboratory for Corrosion Science;Institute of Corrosion and Protection of Metals; Chinese Aeademy of Sciences;Shenyang)(Manuscript received 4 June; 1992)

HAN Yumei; HAN Enhou;KE Wei (State Key Laboratory for Corrosion Science;Institute of Corrosion and Protection of Metals; Chinese Aeademy of Sciences;Shenyang)(Manuscript received 4 June; 1992). DETERMINATION OF FATIGUE RELIABILITY UNDER COMPLEX LOADING. Acta Metall Sin, 1994, 30(4): 170-175.

Abstract References Related Articles Recommended Metrics Download:  PDF(345KB)  Export:  BibTeX | EndNote (RIS)       Abstract  A new non-linear accumulate damage model was derived from the concept of equal failure probabilities under different stress levels. Based on this model,a method of calculating fatigue reliability under complex loading was obtained when the fatigue life is obeying logical normal distribution. At last, the calculating formulas were discussed when the P-S-N curve is described as a power function or an exponential function.Correspondent: HAN Yumei, research assistant, Institute of Corrosion and Protection of Metals, Chinese Academy of Sciences, Shenyang 110015 Key words:  reliability      fatigue      damage      fatigue life      Received:  18 April 1994      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1994/V30/I4/170 1谢里阳．机械工程学报,1987;23(2):102曾春华,邹十践．疲劳分析方法及应用.北京:国防工业出版社,1991:263CepeHCeHCB,KoraeBBⅡ,PM著,汪一麟译.机械零件的承载能力和强度计算.北京:机械工业出版社,1984:2284徐灏.疲劳强度设计.北京:机械工业出版社,1981:475徐灏．机械强度的可靠性设计.北京:机械工业出版社,1984:2256高镇同.疲劳应用统计学.北京:国防工业出版社,1986:3717MincerMA．JApplMechASMETrans,1945;9:A1598MacroSM,StarkeyWL．ASMETrans,1954;76:627 9 WeibullW．FatigueTestingandAnalysisofResults．NewYork:MacmillanCompany,1961:12610TanakaT．ProceedingsofInterConfonFatigue,Birmingham:MaterialsandComponentEngineeringPublicationLtd．,1984:211FuHuimin,GaoZhentong．ProceedingsofInterConfonStrucSafetyandReliability．1985:76512韩恩厚,韩玉梅,柯伟,自然科学进展,1994待发表13楼志文.损伤力学基础,西安交通大学出版社,1991:9814CioclovD．Proc4thConfonWeldingandMetalTesting,Tokyo:PergamonPress,Timisoara,1969:37115HashinZ,SubramanyanD．FatigueEngMaterStruct,1980;2:345 [1] WANG Lei, LIU Mengya, LIU Yang, SONG Xiu, MENG Fanqiang. Research Progress on Surface Impact Strengthening Mechanisms and Application of Nickel-Based Superalloys[J]. 金属学报, 2023, 59(9): 1173-1189. [2] LI Jiarong, DONG Jianmin, HAN Mei, LIU Shizhong. Effects of Sand Blasting on Surface Integrity and High Cycle Fatigue Properties of DD6 Single Crystal Superalloy[J]. 金属学报, 2023, 59(9): 1201-1208. [3] JIANG He, NAI Qiliang, XU Chao, ZHAO Xiao, YAO Zhihao, DONG Jianxin. Sensitive Temperature and Reason of Rapid Fatigue Crack Propagation in Nickel-Based Superalloy[J]. 金属学报, 2023, 59(9): 1190-1200. [4] ZHAO Peng, XIE Guang, DUAN Huichao, ZHANG Jian, DU Kui. Recrystallization During Thermo-Mechanical Fatigue of Two High-Generation Ni-Based Single Crystal Superalloys[J]. 金属学报, 2023, 59(9): 1221-1229. [5] LIU Wei, CHEN Wanqi, MA Menghan, LI Kailun. Review of Irradiation Damage Behavior of Tungsten Exposed to Plasma in Nuclear Fusion[J]. 金属学报, 2023, 59(8): 986-1000. [6] ZHANG Qiliang, WANG Yuchao, LI Guangda, LI Xianjun, HUANG Yi, XU Yunze. Erosion-Corrosion Performance of EH36 Steel Under Sand Impacts of Different Particle Sizes[J]. 金属学报, 2023, 59(7): 893-904. [7] ZHANG Lu, YU Zhiwei, ZHANG Leicheng, JIANG Rong, SONG Yingdong. Thermo-Mechanical Fatigue Cycle Damage Mechanism and Numerical Simulation of GH4169 Superalloy[J]. 金属学报, 2023, 59(7): 871-883. [8] ZHANG Bin, TIAN Da, SONG Zhuman, ZHANG Guangping. Research Progress in Dwell Fatigue Service Reliability of Titanium Alloys for Pressure Shell of Deep-Sea Submersible[J]. 金属学报, 2023, 59(6): 713-726. [9] GUO Fu, DU Yihui, JI Xiaoliang, WANG Yishu. Recent Progress on Thermo-Mechanical Reliability of Sn-Based Alloys and Composite Solder for Microelectronic Interconnection[J]. 金属学报, 2023, 59(6): 744-756. [10] ZHANG Zhefeng, LI Keqiang, CAI Tuo, LI Peng, ZHANG Zhenjun, LIU Rui, YANG Jinbo, ZHANG Peng. Effects of Stacking Fault Energy on the Deformation Mechanisms and Mechanical Properties of Face-Centered Cubic Metals[J]. 金属学报, 2023, 59(4): 467-477. [11] QI Zhao, WANG Bin, ZHANG Peng, LIU Rui, ZHANG Zhenjun, ZHANG Zhefeng. Effects of Stress Ratio on the Fatigue Crack Growth Rate Under Steady State of Selective Laser Melted TC4 Alloy with Defects[J]. 金属学报, 2023, 59(10): 1411-1418. [12] HAN Dong, ZHANG Yanjie, LI Xiaowu. Effect of Short-Range Ordering on the Tension-Tension Fatigue Deformation Behavior and Damage Mechanisms of Cu-Mn Alloys with High Stacking Fault Energies[J]. 金属学报, 2022, 58(9): 1208-1220. [13] SONG Wenshuo, SONG Zhuman, LUO Xuemei, ZHANG Guangping, ZHANG Bin. Fatigue Life Prediction of High Strength Aluminum Alloy Conductor Wires with Rough Surface[J]. 金属学报, 2022, 58(8): 1035-1043. [14] ZHOU Hongwei, GAO Jianbing, SHEN Jiaming, ZHAO Wei, BAI Fengmei, HE Yizhu. Twin Boundary Evolution Under Low-Cycle Fatigue of C-HRA-5 Austenitic Heat-Resistant Steel at High Temperature[J]. 金属学报, 2022, 58(8): 1013-1023. [15] ZHU Xiaohui, LIU Xiangbing, WANG Runzhong, LI Yuanfei, LIU Wenqing. Effects of Ar Ion Irradiation on Microstructure of Fe-Cu Alloys at 290oC[J]. 金属学报, 2022, 58(7): 905-910. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed