Acta Metall Sin  1988, Vol. 24 Issue (5): 366-372    DOI:

Current Issue | Archive | Adv Search |

EFFECT OF Mg AND Zr ADDITION ON CREEP CRACK GROWTH BEHAVIOUR OF A Ni-BASE SUPERALLOY

GUO Encai;XU Fengqin Central Iron and Steel Research Institute; Ministry Metallurgical Industry Beijing

GUO Encai;XU Fengqin Central Iron and Steel Research Institute; Ministry Metallurgical Industry Beijing. EFFECT OF Mg AND Zr ADDITION ON CREEP CRACK GROWTH BEHAVIOUR OF A Ni-BASE SUPERALLOY. Acta Metall Sin, 1988, 24(5): 366-372.

Abstract References Related Articles Recommended Metrics Download:  PDF(487KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The growth rate of creep cracks and the times to initiation of crackand to rupture of specimen (t_(rc) and t_r) were measured by means of electrical poten-tial method using single edge-notched specimens at 700℃. The field near the cracktip under steady-state creep was represented by energy rate integral (C), and thegrowth rate as a function of C has been obtained. The agreement between the pre-dicted and observed t_(rc) values is quite good. It was found that the addition ofsmall amounts of Mg and Zr causes t_(rc) and t_r of the specimens to increase signifi-cantly. Key words:  Ni-base alloy      Mg      Zr      creep crack growth rate      Received:  18 May 1988      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1988/V24/I5/366 1 Floreen S, Kane R H. Metall Trans, 1976; 7A: 1157 2 Scarlin R B. Mater Sci Eng, 1977; 30: 53 3 Sadananda K. Shahinian P. Metall Trans, 1983; 14A: 1467 4 Sadananda K, Shahinian P. In: Gittus J ed., Cavities and Cracks in Creep and Fatigue, London: Applied Science, 1981: 109 5 Floreen S. Metall Trans, 1975; 6A: 1741 6 Sadananda K, Shahinian P. Metall Trans, 1977; 8A: 439 7 Nazmy M Y, Wuthrich C. Mater Sci Eng, 1983; 61: 119 8 Riedel H, Rice J R. In Fracture Mechanics, ASTM STP 700, 1980: 112 9 郭桂雄,申辉旺,蔡其巩.钢铁研究总院学报,1983;3(3) :487 [1] LI Jingren, XIE Dongsheng, ZHANG Dongdong, XIE Hongbo, PAN Hucheng, REN Yuping, QIN Gaowu. Microstructure Evolution Mechanism of New Low-Alloyed High-Strength Mg-0.2Ce-0.2Ca Alloy During Extrusion[J]. 金属学报, 2023, 59(8): 1087-1096. [2] WANG Zongpu, WANG Weiguo, Rohrer Gregory S, CHEN Song, HONG Lihua, LIN Yan, FENG Xiaozheng, REN Shuai, ZHOU Bangxin. {111}/{111} Near Singular Boundaries in an Al-Zn-Mg-Cu Alloy Recrystallized After Rolling at Different Temperatures[J]. 金属学报, 2023, 59(7): 947-960. [3] WU Dongjiang, LIU Dehua, ZHANG Ziao, ZHANG Yilun, NIU Fangyong, MA Guangyi. Microstructure and Mechanical Properties of 2024 Aluminum Alloy Prepared by Wire Arc Additive Manufacturing[J]. 金属学报, 2023, 59(6): 767-776. [4] WANG Furong, ZHANG Yongmei, BAI Guoning, GUO Qingwei, ZHAO Yuhong. First Principles Calculation of Al-Doped Mg/Mg2Sn Alloy Interface[J]. 金属学报, 2023, 59(6): 812-820. [5] LIU Manping, XUE Zhoulei, PENG Zhen, CHEN Yulin, DING Lipeng, JIA Zhihong. Effect of Post-Aging on Microstructure and Mechanical Properties of an Ultrafine-Grained 6061 Aluminum Alloy[J]. 金属学报, 2023, 59(5): 657-667. [6] SHEN Zhao, WANG Zhipeng, HU Bo, LI Dejiang, ZENG Xiaoqin, DING Wenjiang. Research Progress on the Mechanisms Controlling High-Temperature Oxidation Resistance of Mg Alloys[J]. 金属学报, 2023, 59(3): 371-386. [7] LI Qian, SUN Xuan, LUO Qun, LIU Bin, WU Chengzhang, PAN Fusheng. Regulation of Hydrogen Storage Phase and Its Interface in Magnesium-Based Materials for Hydrogen Storage Performance[J]. 金属学报, 2023, 59(3): 349-370. [8] LOU Feng, LIU Ke, LIU Jinxue, DONG Hanwu, LI Shubo, DU Wenbo. Microstructures and Formability of the As-Rolled Mg- xZn-0.5Er Alloy Sheets at Room Temperature[J]. 金属学报, 2023, 59(11): 1439-1447. [9] GONG Xiangpeng, WU Cuilan, LUO Shifang, SHEN Ruohan, YAN Jun. Effect of Natural Aging on Artificial Aging of an Al-2.95Cu-1.55Li-0.57Mg-0.18Zr Alloy at 160oC[J]. 金属学报, 2023, 59(11): 1428-1438. [10] PENG Liming, DENG Qingchen, WU Yujuan, FU Penghuai, LIU Ziyi, WU Qianye, CHEN Kai, DING Wenjiang. Additive Manufacturing of Magnesium Alloys by Selective Laser Melting Technology: A Review[J]. 金属学报, 2023, 59(1): 31-54. [11] FENG Di, ZHU Tian, ZANG Qianhao, LEE Yunsoo, FAN Xi, ZHANG Hao. Solution Behavior of Spray-Formed Hypereutectic AlSiCuMg Alloy[J]. 金属学报, 2022, 58(9): 1129-1140. [12] YANG Tianye, CUI Li, HE Dingyong, HUANG Hui. Enhancement of Microstructure and Mechanical Property of AlSi10Mg-Er-Zr Alloys Fabricated by Selective Laser Melting[J]. 金属学报, 2022, 58(9): 1108-1117. [13] GENG Yaoxiang, TANG Hao, XU Junhua, ZHANG Zhijie, YU Lihua, JU Hongbo, JIANG Le, JIAN Jianglin. Formability and Mechanical Properties of High-Strength Al-(Mn, Mg)-(Sc, Zr) Alloy Produced by Selective Laser Melting[J]. 金属学报, 2022, 58(8): 1044-1054. [14] SONG Qingzhong, QIAN Kun, SHU Lei, CHEN Bo, MA Yingche, LIU Kui. Interfacial Reaction Between Nickel-Based Superalloy K417G and Oxide Refractories[J]. 金属学报, 2022, 58(7): 868-882. [15] WU Caihong, FENG Di, ZANG Qianhao, FAN Shichun, ZHANG Hao, LEE Yunsoo. Microstructure Evolution and Recrystallization Behavior During Hot Deformation of Spray Formed AlSiCuMg Alloy[J]. 金属学报, 2022, 58(7): 932-942. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed