金属学报  2008, Vol. 44 Issue (5): 619-625

论文 本期目录 | 过刊浏览 |

板坯连铸结晶器电磁制动和吹氩过程的多相流动现象

于海岐;朱苗勇

辽宁省沈阳市东北大学

MULTIPHASE FLOW PHENOMENA IN A SLAB CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC BRAKE AND ARGON GAS INJECTION

YU Hai-Qi

辽宁省沈阳市东北大学

于海岐; 朱苗勇 . 板坯连铸结晶器电磁制动和吹氩过程的多相流动现象[J]. 金属学报, 2008, 44(5): 619-625 .
, . MULTIPHASE FLOW PHENOMENA IN A SLAB CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC BRAKE AND ARGON GAS INJECTION[J]. Acta Metall Sin, 2008, 44(5): 619-625 .

摘要 参考文献 相关文章 Metrics 全文: PDF(4335 KB)   摘要: 利用数值模拟方法研究了高拉速连铸结晶器内电磁制动和吹氩耦合作用下的磁场、 钢液流场和夹杂物行为, 分析了电磁制动和吹氩量等不同工艺参数对结晶器内的钢液流动和夹杂物去除的影响规律. 结果表明: 电磁制动可明显减缓钢液流速(尤其是弯月面附近速度), 但不利于小粒径夹杂物的上浮, 5---50 μm的夹杂物上浮率由无电磁制 动且不吹氩时的6.7%降低到3.3%; 吹氩可增加整个上回流区钢液的向上运动趋势, 粒径 50 μm以下的夹杂物颗粒上浮率提高到8.9%; 吹氩量增加使自由液面附近产生较强的漩流区, 且容易产生二次涡流, 直接影响液面波动情况和卷渣的发生; 电磁制动和吹氩双重作用则有利于夹杂物上浮, 5- 50 μm小粒径夹杂物去除率可达12.2%, 其被凝固坯壳的捕获率可降低到64.4%. 关键词 ： 高拉速连铸,  多相流动,  电磁制动,  数值模拟     Abstract：It described a numerical simulation study for the multiphase phenomena of magnetic field, liquid steel flow field and inclusion behaviour, considering the coupled effects of electromagnetic brake (EMBr) and argon gas injection in the slab continuous casting mold with high casting speed. The effects of the EMBr and argon gas flow rate on the liquid steel flow and inclusion removal rate have been investigated. The results show that EMBr could slow down the flow velocity of liquid steel effectively, especially near the meniscus surface, but it had no helpful for the removal of small inclusions and the removal rate for the inclusion particles in diameter range of 5~50μm reduced from 6.7% without EMBr and argon gas injection to 3.3% with EMBr in the mold. The argon gas injection could increase the liquid steel flow up tendency of the upper circulating area and the floating up rate of inclusion particles with the size 5~50μm increased to 8.9%. The increasing of argon gas flow rate resulted in a stronger eddy zone near the free surface especially near the submerged entry nozzle (SEN) and formed the secondary vortex flow easily, which impacted the fluctuation of free surface and the slag entrapment. The double action of EMBr and argon gas injection could increase the floating up rate of inclusions and the removal rate of small inclusions with the size 5~50μm increased to 12.2% and the rate for inclusions to be trapped into solidified shell was reduced to 64.4%. Key words： continuous casting of high casting speed    multiphase flow    electromagnetic brake    numerical simulation 收稿日期: 2007-10-15      ZTFLH:  TF777.1   服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 于海岐 朱苗勇 44.8K 链接本文: https://www.ams.org.cn/CN/      或      https://www.ams.org.cn/CN/Y2008/V44/I5/619 [1]Thomas B G,Dennisov A,Bai H.80th Steelmaking Con- ference,Warrendale,PA:Iron and Steel Society,1997:375 [2]Thomas B G,Huang X.76th Steelmaking Conference, Warrendale,PA:Iron and Steel Society,1993:273 [3]Sussman R C,Burns M T,Huang X,Thomas B G.lOth Process Technology Conference Proceedings,Warrendale, PA:Iron and Steel Society,1992:291 [4]Noriko K,Toshio I,Jun K,Norichika A.ISIJ Int,2002; 42:1251 [5]Li B K,Toshimitsu O,Takateru U.Metall Mater Trans, 2000;31B:1491 [6]Li B K,Fumitaka T.ISIJ Int,2003;43:923 [7]Li B K,He J C,Jia G L,Gao Y Y.Acta Metall Sin,1997; 33:1207 (李宝宽，赫冀成，贾光霖，高允彦．金属学报，1997；33：1207) [8]Lei H,Jin Y L,Zhu M Y,He J C.J Iron Steel Res,2002; 14(3):13 (雷洪，金永丽，朱苗勇，赫冀成．钢铁研究学报，2002；14(3)：13) [9]Lei H,Zhu M Y,Wang W Z.Eng Chem Metall,1999;20: 193 (雷洪，朱苗勇，王文忠．化工冶金，1999；20：193) [10]Liu G M,Shi S Q,Deng K,Ren Z M.Iron Steel,2007; 42(7):23 (刘光穆，石绍清，邓康，任忠鸣．钢铁，2007；42(7)：23) [11]Wei J,Sun Y H,Cai K K,Zhou Y C,Wei Z K.Iron Steel, 2007;42(8):32 (魏军，孙彦辉，蔡开科，周英超，魏祖康．钢铁，2007；42(8)：32) [12]Chen Z H,Wang E G,Zhang X W,He J C.Acta Metall Sin,2007;43:422 (陈芝会，王恩刚，张兴武，赫冀成．金属学报，2007；43：422) [13]Zhang G F,Shen H F,Wang L,Liu B C.Foundry,2005; 54:484 (张桂芳，沈厚发，王镭，柳百成．铸造，2005；54：484) [14]Fluent Inc.Fluent 6.3 Magnetohydrodynamics (MHD) Module Manual,Chapter 1,Lebanon,NH,2006:1 [15]Man Y H,Hyun G,Seung H S.J Mater Process Technol, 2003;133:322 [16]Fluent Inc.Fluent 6.3 User's Guide,Chapter 22, Lebanon,NH,2006:1 [17]Pfeiler C,Wu M,Ludwig A.Mater Sci Eng,2005;A413: 115 [18]Zhang L F,Yang S B,Cai K K,Li J Y,Wan X G,Thomas B G.Metall Mater Trans,2007;38B:63G [1] 毕中南, 秦海龙, 刘沛, 史松宜, 谢锦丽, 张继. 高温合金锻件残余应力量化表征及控制技术研究进展[J]. 金属学报, 2023, 59(9): 1144-1158. [2] 王重阳, 韩世伟, 谢峰, 胡龙, 邓德安. 固态相变和软化效应对超高强钢焊接残余应力的影响[J]. 金属学报, 2023, 59(12): 1613-1623. [3] 张开元, 董文超, 赵栋, 李世键, 陆善平. 固态相变对Fe-Co-Ni超高强度钢长臂梁构件焊接-淬火过程应力和变形的影响[J]. 金属学报, 2023, 59(12): 1633-1643. [4] 周小宾, 赵占山, 汪万行, 徐建国, 岳强. 渣-金界面气泡夹带行为数值物理模拟[J]. 金属学报, 2023, 59(11): 1523-1532. [5] 夏大海, 邓成满, 陈子光, 李天书, 胡文彬. 金属材料局部腐蚀损伤过程的近场动力学模拟：进展与挑战[J]. 金属学报, 2022, 58(9): 1093-1107. [6] 胡龙, 王义峰, 李索, 张超华, 邓德安. 基于SH-CCT图的Q345钢焊接接头组织与硬度预测方法研究[J]. 金属学报, 2021, 57(8): 1073-1086. [7] 李子晗, 忻建文, 肖笑, 王欢, 华学明, 吴东升. 热导型等离子弧焊电弧物理特性和熔池动态行为[J]. 金属学报, 2021, 57(5): 693-702. [8] 杨勇, 赫全锋. 高熵合金中的晶格畸变[J]. 金属学报, 2021, 57(4): 385-392. [9] 王富强, 刘伟, 王兆文. 铝电解槽中局部阴极电流增大对电解质-铝液两相流场的影响[J]. 金属学报, 2020, 56(7): 1047-1056. [10] 刘继召, 黄鹤飞, 朱振博, 刘阿文, 李燕. 氙离子辐照后Hastelloy N合金的纳米硬度及其数值模拟[J]. 金属学报, 2020, 56(5): 753-759. [11] 王波,沈诗怡,阮琰炜,程淑勇,彭望君,张捷宇. 冶金过程中的气液两相流模拟[J]. 金属学报, 2020, 56(4): 619-632. [12] 任忠鸣,雷作胜,李传军,玄伟东,钟云波,李喜. 电磁冶金技术研究新进展[J]. 金属学报, 2020, 56(4): 583-600. [13] 许庆彦,杨聪,闫学伟,柳百成. 高温合金涡轮叶片定向凝固过程数值模拟研究进展[J]. 金属学报, 2019, 55(9): 1175-1184. [14] 戴培元,胡兴,逯世杰,王义峰,邓德安. 尺寸因素对2D轴对称模型计算不锈钢管焊接残余应力精度的影响[J]. 金属学报, 2019, 55(8): 1058-1066. [15] 张清东, 林潇, 刘吉阳, 胡树山. Q&P钢热处理过程有限元法数值模拟模型研究[J]. 金属学报, 2019, 55(12): 1569-1580. Viewed Full text Abstract Cited   Shared      Discussed