|
|
|
| 粉末特征对激光粉末床熔融制备可降解Zn-Mn-Mg合金组织与力学性能的影响 |
黄成聪1,2, 李亚庚1,2( ), 王鲁宁1,2( ) |
1 北京科技大学 材料科学与工程学院 北京材料基因组高精尖创新中心 北京 100083 2 辽宁材料实验室 材料智能技术研究所 沈阳 110004 |
|
| Effects of Powder Morphology on Microstructure Evolution and Mechanical Properties of Laser Powder Bed Fusion Degradable Zn-Mn-Mg Alloy |
HUANG Chengcong1,2, LI Yageng1,2( ), WANG Luning1,2( ) |
1 Beijing Advanced Innovation Center for Materials Genome Engineering, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China 2 Institute of Materials Intelligent Technology, Liaoning Academy of Materials, Shenyang 110004, China |
引用本文:
黄成聪, 李亚庚, 王鲁宁. 粉末特征对激光粉末床熔融制备可降解Zn-Mn-Mg合金组织与力学性能的影响[J]. 金属学报, 2026, 62(10): 1702-1712.
Chengcong HUANG,
Yageng LI,
Luning WANG.
Effects of Powder Morphology on Microstructure Evolution and Mechanical Properties of Laser Powder Bed Fusion Degradable Zn-Mn-Mg Alloy[J]. Acta Metall Sin, 2026, 62(10): 1702-1712.
| [1] |
Kabir H, Munir K, Wen C E, et al. Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives[J]. Bioact. Mater., 2021, 6: 836
doi: 10.1016/j.bioactmat.2020.09.013
pmid: 33024903
|
| [2] |
Li Y G, Shi Y X, Lu Y C, et al. Additive manufacturing of vascular stents[J]. Acta Biomater., 2023, 167: 16
doi: 10.1016/j.actbio.2023.06.014
pmid: 37331614
|
| [3] |
Mostaed E, Sikora-Jasinska M, Drelich J W, et al. Zinc-based alloys for degradable vascular stent applications[J]. Acta Biomater., 2018, 71: 1
doi: S1742-7061(18)30125-9
pmid: 29530821
|
| [4] |
Qi X H, Liang X K, Wang J H, et al. Microstructure tailoring in laser powder bed fusion (L-PBF): Strategies, challenges, and future outlooks[J]. J. Alloys Compd., 2024, 970: 172564
doi: 10.1016/j.jallcom.2023.172564
|
| [5] |
Clare A T, Mishra R S, Merklein M, et al. Alloy design and adaptation for additive manufacture[J]. J. Mater. Process. Technol., 2022, 299: 117358
doi: 10.1016/j.jmatprotec.2021.117358
|
| [6] |
Bose S, Ke D X, Sahasrabudhe H, et al. Additive manufacturing of biomaterials[J]. Prog. Mater. Sci., 2018, 93: 45
doi: 10.1016/j.pmatsci.2017.08.003
pmid: 31406390
|
| [7] |
Zheng Y F, Xia D D, Shen Y N, et al. Additively manufactured biodegradable metal implants[J]. Acta Metall. Sin., 2021, 57: 1499
|
| [7] |
郑玉峰, 夏丹丹, 谌雨农 等. 增材制造可降解金属医用植入物[J]. 金属学报, 2021, 57: 1499
doi: 10.11900/0412.1961.2021.00294
|
| [8] |
Li Y G, Jahr H, Zhou J, et al. Additively manufactured biodegradable porous metals[J]. Acta Biomater., 2020, 115: 29
doi: S1742-7061(20)30478-5
pmid: 32853809
|
| [9] |
Kassym K, Perveen A. Atomization processes of metal powders for 3D printing[J]. Mater. Today: Proc., 2020, 26: 1727
|
| [10] |
Zhao X M, Chen J, Lin X, et al. Study on microstructure and mechanical properties of laser rapid forming Inconel 718[J]. Mater. Sci. Eng., 2008, A478: 119
|
| [11] |
Tammas-Williams S, Withers P J, Todd I, et al. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components[J]. Scr. Mater., 2016, 122: 72
doi: 10.1016/j.scriptamat.2016.05.002
|
| [12] |
Spierings A B, Herres N, Levy G. Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts[J]. Rapid Prototyping J., 2011, 17: 195
doi: 10.1108/13552541111124770
|
| [13] |
Abd-Elghany K, Bourell D L. Property evaluation of 304L stainless steel fabricated by selective laser melting[J]. Rapid Prototyping J., 2012, 18: 420
doi: 10.1108/13552541211250418
|
| [14] |
Baitimerov R, Lykov P, Zherebtsov D, et al. Influence of powder characteristics on processability of AlSi12 alloy fabricated by selective laser melting[J]. Materials, 2018, 11: 742
doi: 10.3390/ma11050742
|
| [15] |
Bi Z N, Zhang P, Zhang H P. Effect of metal powder characteristics on metallurgical quality of laser powder bed fusion additive manufacturing[J]. Powder Metall. Ind., 2024, 34(6): 1
|
| [15] |
毕中南, 张 鹏, 张浩鹏. 金属粉末特征对激光粉末床熔融成形质量的影响[J]. 粉末冶金工业, 2024, 34(6): 1
|
| [16] |
Qin F, Shi Q, Zhou G, et al. Influence of powder particle size distribution on microstructure and mechanical properties of 17-4 PH stainless steel fabricated by selective laser melting[J]. J. Mater. Res. Technol., 2023, 25: 231
doi: 10.1016/j.jmrt.2023.05.241
|
| [17] |
Shi Z Z, Yu J, Liu X F. Microalloyed Zn-Mn alloys: From extremely brittle to extraordinarily ductile at room temperature[J]. Mater. Des., 2018, 144: 343
doi: 10.1016/j.matdes.2018.02.049
|
| [18] |
Zhu X L, Ren T T, Guo P S, et al. Strengthening mechanism and biocompatibility of degradable Zn-Mn alloy with different Mn content[J]. Mater. Today Commun., 2022, 31: 103639
|
| [19] |
Zheng Y Z, Huang C C, Li Y G, et al. Mimicking the mechanical properties of cortical bone with an additively manufactured biodegradable Zn-3Mg alloy[J]. Acta Biomater., 2024, 182: 139
doi: 10.1016/j.actbio.2024.05.023
|
| [20] |
Li Z L, Zhang X L, Tian D K. Effect of multi-pass compression deformation on microstructure evolution of AZ80 magnesium alloy[J]. Acta Metall. Sin., 2024, 60: 311
doi: 10.11900/0412.1961.2022.00010
|
| [20] |
李振亮, 张欣磊, 田董扩. 多道次压缩变形对AZ80镁合金微观组织演化的影响[J]. 金属学报, 2024, 60: 311
doi: 10.11900/0412.1961.2022.00010
|
| [21] |
Sangid M D, Ezaz T, Sehitoglu H. Energetics of residual dislocations associated with slip-twin and slip-GBs interactions[J]. Mater. Sci. Eng., 2012, A542: 21
|
| [22] |
Chu F Z, Shen H P, Liu J W, et al. Improved ductility by reducing powder size in laser powder bed fusion of AlSi10Mg[J]. Addit. Manuf. Front., 2024, 3: 200122
|
| [23] |
Zhang S S, Lane B, Whiting J, et al. On thermal properties of metallic powder in laser powder bed fusion additive manufacturing[J]. J. Manuf. Process., 2019, 47: 382
doi: 10.1016/j.jmapro.2019.09.012
|
| [24] |
Gusarov A V, Yadroitsev I, Bertrand P, et al. Model of radiation and heat transfer in laser-powder interaction zone at selective laser melting[J]. J. Heat Transfer., 2009, 131: 072101
|
| [25] |
Körner C, Attar E, Heinl P. Mesoscopic simulation of selective beam melting processes[J]. J. Mater. Process. Technol., 2011, 211: 978
doi: 10.1016/j.jmatprotec.2010.12.016
|
| [26] |
Hosseini E, Popovich V A. A review of mechanical properties of additively manufactured Inconel 718[J]. Addit. Manuf., 2019, 30: 100877
|
| [27] |
Farzadfar S A, Murtagh M J, Venugopal N. Impact of IN718 bimodal powder size distribution on the performance and productivity of laser powder bed fusion additive manufacturing process[J]. Powder Technol., 2020, 375: 60
doi: 10.1016/j.powtec.2020.07.092
|
| [28] |
Coe H G, Pasebani S. Use of bimodal particle size distribution in selective laser melting of 316L stainless steel[J]. J. Manuf. Mater. Process., 2020, 4: 8
doi: 10.3390/jmmp4010008
|
| [29] |
Qin Y, Liu J G, Chen Y Z, et al. Influence of laser energy input and shielding gas flow on evaporation fume during laser powder bed fusion of Zn metal[J]. Materials, 2021, 14: 2677
doi: 10.3390/ma14102677
|
| [30] |
Ruan G, Liu C, Qu H Q, et al. A comparative study on laser powder bed fusion of IN718 powders produced by gas atomization and plasma rotating electrode process[J]. Mater. Sci. Eng., 2022, A850: 143589
|
| [31] |
Brika S E, Letenneur M, Dion C A, et al. Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy[J]. Addit. Manuf., 2020, 31: 100929
|
| [32] |
Venezuela J, Dargusch M S. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: A comprehensive review[J]. Acta Biomater., 2019, 87: 1
doi: S1742-7061(19)30055-8
pmid: 30660777
|
| [33] |
Wu Y, Fu Q Y, Guo B S, et al. Revealing the mechanical and degradation properties of the Zn-Cu-Ti alloy with ununiform heterostructure[J]. Mater. Sci. Eng., 2022, A853: 143775
|
| [34] |
Shi Z Z, Li X M, Yao S L, et al. 300 MPa grade biodegradable high-strength ductile low-alloy (BHSDLA) Zn-Mn-Mg alloys: An in vitro study[J]. J. Mater. Sci. Technol., 2023, 138: 233
doi: 10.1016/j.jmst.2022.08.015
|
| [35] |
Yin D D, Boehlert C J, Long L J, et al. Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg-Y sheets[J]. Int. J. Plast., 2021, 136: 102878
doi: 10.1016/j.ijplas.2020.102878
|
| [36] |
Long F, Kacher J, Yao Z W, et al. A tomographic TEM study of tension-compression asymmetry response of pyramidal dislocations in a deformed Zr-2.5Nb alloy[J]. Scr. Mater., 2018, 153: 94
doi: 10.1016/j.scriptamat.2018.04.043
|
| [37] |
Chen C, Huang H, Niu J L, et al. Origin of high tension-compression yield asymmetry in as-extruded pure zinc[J]. Scr. Mater., 2021, 200: 113922
doi: 10.1016/j.scriptamat.2021.113922
|
| [38] |
Chandra S, Wang C C, Tor S B, et al. Powder-size driven facile microstructure control in powder-fusion metal additive manufacturing processes[J]. Nat. Commun., 2024, 15: 3094
doi: 10.1038/s41467-024-47257-w
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|