Please wait a minute...
金属学报  2005, Vol. 41 Issue (6): 622-626     
  论文 本期目录 | 过刊浏览 |
硼含量对镍基合金GH4049晶界析出相和高温性能的影响
陈国胜;金 鑫;周奠华;王世普;谢 伟;王林涛
宝钢集团特钢技术中心; 上海 200940
Effects of Boron Content on Boundaries Precipitates in Ni Base Alloy GH4049 and Its High Temperature Properties
CHEN Guosheng; JIN Xin; ZHOU Dianhua; WANG Shipu; XIE Wei; WANG Lintao
Special Steel Technical Center; Baosteel Group; Shanghai 200940
引用本文:

陈国胜; 金鑫; 周奠华; 王世普; 谢伟; 王林涛 . 硼含量对镍基合金GH4049晶界析出相和高温性能的影响[J]. 金属学报, 2005, 41(6): 622-626 .
, , , , , . Effects of Boron Content on Boundaries Precipitates in Ni Base Alloy GH4049 and Its High Temperature Properties[J]. Acta Metall Sin, 2005, 41(6): 622-626 .

全文: PDF(330 KB)  
摘要: 在晶界面上用萃取碳复型技术研究了镍基合金GH4049 (Ni-15Co-10Cr-5.5W-5Mo-4.2Al-1.5Ti)中与B和C的晶界 偏聚效应密切相关的二次析出相特征. B含量低于0.008%时, 因固溶 B/C(原子比)很低, 晶界析出大尺寸MC薄膜和M6C枝晶片以及薄膜状 M23C6, 不利于高温塑性和持久寿命. B含量为0.011%和 0.018%时, 固溶B/C(原子比)虽仅为0.667和0.941, 已可减少和全部 抑制上述碳化物的析出, 代之以弥散M3B2颗粒, 高温性 能大幅度上升. 但B含量过高, M3B2密集析出, 高温性能 下降. 降低固溶冷却速度而使B和C原子向晶界长程偏聚, 可促进 M3B2析出, 改善MC的形貌并抑制M6C和M23C6析出.
关键词 镍基高温合金晶界析出相     
Abstract:Characteristics of the secondary precipitates on grain surfaces connected with segregation of boron and carbon elements in a Ni-15Co-10Cr-5.5W-5Mo-4.2Al-1.5Ti alloy (GH4049) were studied by using extraction carbon replica method. When B content was below 0.008\%, or the solid-solutioned B/C atom ratio was decreased to about 0.365, the high temperature ductility and stress rupture life were reduced because large MC films, dendritic flake M6C and fine M23C6 films precipitated at grain boundaries. When B contents were 0.011% and 0.018\%, or the solid-solutioned B/C atom ratios were 0.667 and 0.941, the amounts of these carbides were decreased or their precipitates were refrained, but particles M3B2 precipitated, which improves the high temperature properties markedly. When B content was excessively high, M3B2 particles precipitated densely, resulting in the decrease of high temperature properties. If decreasing the cooling rate after solution, B and C atoms can diffuse at long distance, which promotes the precipitate of M3B2 particles at grain boundaries, improves the morphology of MC, and depresses the precipitations of M6C and M23C6.
Key wordsNi base superalloy    boron    precipitate at grain boundary
收稿日期: 2004-10-19     
ZTFLH:  TG146.1  
[1]Franzoni U,Marchetti F,Sturlese S.Scr Metall,1985;19:511
[2]Cao W D,Kennedy R L.In:Kissinger R D,Deye D.J.Anton D L,Cetel A D,Nathal M V,Pollock T M,Wood-ford D A,eds.,Superalloys 1996,Warrendale,PA:TMS AIME,1996:589
[3]Kennedy R L,Cao W D,Thomas W M.Adv Mater Process,1996;149(3):33
[4]Gorokhov V P,Kolachev B A,Parfenova O A,Novikova M B.Metall Heat Treat Met,2003;(4):22
[5]Letellier L,Chambreland S,Duval P.Appi Surf Sci,1993;67:305
[6]Letellier L,Guttmann M,Blavette D.Philos Mag Lett,1994;70:189
[7]Horton J A,McKamey C G,Miller M K,Cao W D,Kennedy R L.In:Loria E A,ed.,Superalloys 718,625,706 and Various Derivatives,Warrendale,PA:TMS AIME,1997:401
[8]Lemarchand D,Cadel E,Chambreland S,Blavette D.Philos Mag,2002;82A:1651
[9]Miller M K,Anderson I M,Pike L M,Klarstrom D L. Mater Sci Eng,2002;A327:89
[10]Li Y Q,Liu J Y.High Temp Technol,1990;8:278
[11]Li Y Q,Xu B W,Li Q K.Mater High Temp,1992;10:219
[12]Li Y Q,Chen G S,Zhang J F,Liu J Y.Prog Nat Sci, 2000;10:331
[13]Liu L R,Jin T,Zhao N R,Sun X F,Guan H R,Hu Z Q.Mater Sci Bng,2003;A361:191H
[1] 郑亮, 张强, 李周, 张国庆. /降氧过程对高温合金粉末表面特性和合金性能的影响:粉末存储到脱气处理[J]. 金属学报, 2023, 59(9): 1265-1278.
[2] 江河, 佴启亮, 徐超, 赵晓, 姚志浩, 董建新. 镍基高温合金疲劳裂纹急速扩展敏感温度及成因[J]. 金属学报, 2023, 59(9): 1190-1200.
[3] 王磊, 刘梦雅, 刘杨, 宋秀, 孟凡强. 镍基高温合金表面冲击强化机制及应用研究进展[J]. 金属学报, 2023, 59(9): 1173-1189.
[4] 穆亚航, 张雪, 陈梓名, 孙晓峰, 梁静静, 李金国, 周亦胄. 基于热力学计算与机器学习的增材制造镍基高温合金裂纹敏感性预测模型[J]. 金属学报, 2023, 59(8): 1075-1086.
[5] 张禄, 余志伟, 张磊成, 江荣, 宋迎东. GH4169高温合金热机械疲劳循环损伤机理及数值模拟[J]. 金属学报, 2023, 59(7): 871-883.
[6] 袁江淮, 王振玉, 马冠水, 周广学, 程晓英, 汪爱英. Cr2AlC涂层相结构演变对力学性能的影响[J]. 金属学报, 2023, 59(7): 961-968.
[7] 刘来娣, 丁彪, 任维丽, 钟云波, 王晖, 王秋良. DZ445镍基高温合金高温长时间氧化形成的多层膜结构[J]. 金属学报, 2023, 59(3): 387-398.
[8] 刘路军, 刘政, 刘仁辉, 刘永. Nd90Al10 晶界调控对晶界扩散磁体磁性能和微观结构的影响[J]. 金属学报, 2023, 59(11): 1457-1465.
[9] 于少霞, 王麒, 邓想涛, 王昭东. GH3600镍基高温合金极薄带的制备及尺寸效应[J]. 金属学报, 2023, 59(10): 1365-1375.
[10] 祝国梁, 孔德成, 周文哲, 贺戬, 董安平, 疏达, 孙宝德. 选区激光熔化 γ' 相强化镍基高温合金裂纹形成机理与抗裂纹设计研究进展[J]. 金属学报, 2023, 59(1): 16-30.
[11] 刘仲武, 何家毅. 钕铁硼永磁晶界扩散技术和理论发展的几个问题[J]. 金属学报, 2021, 57(9): 1155-1170.
[12] 朱玉平, 盛乃成, 谢君, 王振江, 荀淑玲, 于金江, 李金国, 杨林, 侯桂臣, 周亦胄, 孙晓峰. 高钨镍基高温合金K416BW相的析出行为[J]. 金属学报, 2021, 57(2): 215-223.
[13] 刘超, 姚志浩, 江河, 董建新. GH4720Li合金毫米级粗大晶粒热变形获得均匀等轴晶粒的可行性及工艺控制[J]. 金属学报, 2021, 57(10): 1309-1319.
[14] 张小丽, 冯丽, 杨彦红, 周亦胄, 刘贵群. 二次枝晶取向对镍基高温合金晶粒竞争生长行为的影响[J]. 金属学报, 2020, 56(7): 969-978.
[15] 王希,刘仁慈,曹如心,贾清,崔玉友,杨锐. 冷却速率对β凝固γ-TiAl合金硼化物和室温拉伸性能的影响[J]. 金属学报, 2020, 56(2): 203-211.