连铸机中间包内的流体流动

金属学报

1988, Vol. 24

Issue (2): 147-154

论文

本期目录 | 过刊浏览

连铸机中间包内的流体流动

贺友多;Y.SAHAI

包头钢铁学院冶金系;教授;美国俄亥俄州立大学

FLUID DYNAMICS OF CONTINUOUS CASTING TUNDISHES

HE Youduo Professor;Department of Mepallergy;Baotou Institute of Iron and Speel Technology;Baotou;Nei Monggot;SAHAI Yogeshwar Baotou Institute of Iron and Steel Technology; Baotou; Nei Monggol; The Ohio State University; Columbus OH; USA

引用本文:

贺友多;Y.SAHAI. 连铸机中间包内的流体流动[J]. 金属学报, 1988, 24(2): 147-154.
, . FLUID DYNAMICS OF CONTINUOUS CASTING TUNDISHES[J]. Acta Metall Sin, 1988, 24(2): 147-154.

全文: PDF(689 KB)

摘要: 研究出一个表示连铸机中间包内的湍流流动和混合的数学模型,该模型包括求解三维湍流Navier-Stokes方程和K-ε两方程的湍流模型.对矩形断面中间包的流动参数和停留时间作出了预报,然后又用这一模型预报一般工业用的中间包流场,这种中间包的侧墙是稍有倾斜,而不是垂直的.结果表明,流场起了变化,这一点也可能对工业上的应用产生重大影响.把理论上的预报结果与水模型中的测量值作了比较.对中间包内的流场的认识也是设计最优化的依据.

关键词 ：连铸机中间包, 三维湍流场, 混合, 停留时间曲线

Abstract：A mathematical model torepresent turbulent fluid flow and mixing incontinuous casting tundishes has been developed. The model involves solution ofthe three-dimensional turbulent Navier-Stokes equation, turbulence being modeledby the so-called K-ε, two-equation model. Fluid flow parameters and residence timedistribution has been predicted in a tundish of rectangular cross section. The modelis later extended to predict fluid flow in typical industrial tundishes where wallsare not vertical, but slightly inclined from the vertical. This results in an interest-ing variation in fluid flow, which may have important technological implications.The theoretical predictions are compared with the measurements obtained in watermodels. The detailed understanding of the hydrodynamics of the tundish flow canbe used to optimize the design for steel cleanliness.

Key words： continuous casting tundishes three-dimensional turbulent fluid field mixing residence time distribution

收稿日期: 1988-02-18

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	贺友多
	Y.SAHAI
44.8K

链接本文:

https://www.ams.org.cn/CN/ 或 https://www.ams.org.cn/CN/Y1988/V24/I2/147

1 Hashio M, Tokuda M, Kawasaki M, Watanabe T. 2nd Process Tech Conf, Chicago: ISS-AIME, 1981: 65
2 Kemeny F L, Harris D J, McLean A, Meadoweroft T R, Young J D. 2nd Process Tech Conf, Chicago: ISS-AIME, 1981: 232
3 Mcpherson N A, Henderson S. Ironmaking Steelmaking, 1983; 10(6) : 259
4 Hamagami K, Sovimachi K, Kuga M. Koshikawa T, Saigusa M. Steelmaking Proc, Pittsburgh: 1982; 65: 358
5 Yamagami A. Tate M, Masui A, Uchibori H. Steelmaking Proc, 1981; 64: 234
6 Nuri Y, Umezawa K, Ohashi T, Itoh R, Mizoguchi R, Yokoi S I. 106th ISIJ Meeting, Oct. 1983, No. S989
7 Kitamura M, Kojima S. Onishi T. Kawasaki S. Ironmaking Steelmaking, 1983; 10(2) : 82
8 Debroy T, Sychterz J A. Metall Trans, 1985; 16B(9) : 497
9 EL-Kaddah N, Szekely J, J Met. 1984; 36(12) : 15
10 Launder B E, Spalding D B. Comput Method Appl Mech Eng, 1974; 3: 269
11 Launder B E, Spalding D B. Heat Transfer Section Report, № HTS/73/2, Imperial College, London, 1973
12 Gosman A D, Launder B E, Whitelaw J H. TEACH-2E, Internal Report, Mech Eng Dept, Imperial College, London, 19768

[1]	张霞, 宋扬, 王誉, 纪逯鹤, 杨媚, 孟皓. 超声共混合成Ni(HNCN)₂/BiVO₄复合可见光催化剂[J]. 金属学报, 2020, 56(11): 1551-1557.
[2]	杨建海,张玉祥,葛利玲,程晓,陈家照,高杨. 焊前混合表面纳米化对2A14铝合金搅拌摩擦焊接头微观组织和力学性能的影响[J]. 金属学报, 2017, 53(7): 842-850.
[3]	孙元,刘纪德,侯星宇,王广磊,杨金侠,金涛,周亦胄. DD5单晶高温合金大间隙钎焊的组织演变与界面形成机制^*[J]. 金属学报, 2016, 52(7): 875-882.
[4]	杨建海,张玉祥,葛利玲,陈家照,张鑫. 2A14铝合金混合表面纳米化对电化学腐蚀行为的影响^*[J]. 金属学报, 2016, 52(11): 1413-1422.
[5]	张军,郑成武,李殿中. 相场法模拟Fe-C合金中奥氏体-铁素体等温相变过程^*[J]. 金属学报, 2016, 52(11): 1449-1458.
[6]	武慧东,张弛,柳文波,杨志刚. 考虑位错相互作用的混合控制模型下先共析铁素体生长动力学模拟[J]. 金属学报, 2015, 51(9): 1136-1144.
[7]	张凤英谭华陈静林鑫黄卫东. 混合焓对激光多层沉积Ti-6Al-4V合金凝固组织的影响[J]. 金属学报, 2012, 48(2): 159-163.
[8]	郭德燕宋佳佳蔡亮毛勇. 高低温熔体混合对Au-20Sn共晶合金凝固组织的影响[J]. 金属学报, 2012, 48(11): 1387-1393.
[9]	刘志远杨志刚李昭东刘振清张弛. 界面反应--扩散混合控制模型下先共析铁素体生长动力学的模拟[J]. 金属学报, 2010, 46(4): 390-395.
[10]	赵世贤宋晓艳王明胜魏崇斌张久兴刘雪梅. WC/Co粉体粒径匹配与放电等离子烧结致密化[J]. 金属学报, 2009, 45(4): 497-502.
[11]	郑伟超; 李双寿; 汤彬; 曾大本 . 混合稀土对AZ91D镁合金组织和力学性能的影响[J]. 金属学报, 2006, 42(8): 835-842 .
[12]	谢晓龙; 赵震; 虞松; 陈军; 李明辉 . 基于混合位移-压力有限元的厚板精冲数值模拟和损伤断裂预测[J]. 金属学报, 2006, 42(10): 1115-1120 .
[13]	赵龙志; 曹小明; 田冲; 胡宛平; 邢宏伟; 张劲松 . 浇注温度对SiC泡沫/SiCp/Al混合复合材料力学性能的影响[J]. 金属学报, 2006, 42(1): 103-108 .
[14]	张志刚; P.Y.Hou; 牛焱 . Fe-xCr-10Al (x=0, 5, 10)合金在900 ℃的氧化: 第三组元作用的新例子[J]. 金属学报, 2005, 41(6): 649-654 .
[15]	张旺峰; 朱金华; 曹春晓 . 亚稳态材料的混合物强度法则新模型[J]. 金属学报, 2005, 41(1): 89-.

Viewed

Full text

Abstract

Cited

Shared

Discussed