Please wait a minute...
金属学报  2012, Vol. 48 Issue (7): 830-836    DOI: 10.3724/SP.J.1037.2012.00226
  论文 本期目录 | 过刊浏览 |
新型镍基粉末冶金高温合金中γ'相扇形组织形成以及演化行为研究
胡本芙1), 刘国权1, 2), 吴凯1), 胡鹏辉1)
1)北京科技大学材料科学与工程学院, 北京 100083
2)北京科技大学新金属材料国家重点实验室, 北京 100083
MORPHOLOGICAL CHANGES BEHAVIOR OF FAN-TYPE STRUCTURES OF γ' PRECIPITATES IN NICKEL-BASED POWDER METALLURGY SUPERALLOYS
HU Benfu1), LIU Guoquan1, 2), WU Kai1),  HU Penghui1)
1) School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083
2) State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083
引用本文:

胡本芙 刘国权 吴凯 胡鹏辉. 新型镍基粉末冶金高温合金中γ'相扇形组织形成以及演化行为研究[J]. 金属学报, 2012, 48(7): 830-836.
, , , . MORPHOLOGICAL CHANGES BEHAVIOR OF FAN-TYPE STRUCTURES OF γ' PRECIPITATES IN NICKEL-BASED POWDER METALLURGY SUPERALLOYS[J]. Acta Metall Sin, 2012, 48(7): 830-836.

全文: PDF(5041 KB)  
摘要: 对新型镍基粉末冶金高温合金FGH98I进行不同工艺热处理, 采用场发射扫描电镜和透射电镜等研究了合金中扇形组织的形成和演变. 结果表明, FGH98I合金中扇形组织是由手指形二次γ'相枝晶和其间的γ基体组成, 其形成具有择域特性, 高度过饱和晶界的成分偏聚区可作为非均匀形核核心, 通过自身浓度梯度扩散控制其长大、发展. 标准时效处理使扇形组织长大和粗化, 高温时效处理使扇形γ'相发生形态失稳, 逐渐变成低能状态的稳定立方形状γ'相.
关键词 镍基粉末冶金高温合金扇形组织冷却速率时效处理    
Abstract:The variety and complexity of γ'  phase morphological changes in heat treatment process of nickel-based powder metallurgy (P/M) superalloy, which contains high volume percentage γ'  strengthening phase, is one of hot issues which material researchers focused on. γ'  phase morphological changes have important effect on the strength, toughness, high-temperature creep and fatigue property of alloy. Based on the research of heat treameat process in the thirdly nickel-based P/M superalloy (FGH98I), the researcher find that there are γ'  fan-structure in solution heat treatment at different cooling rates, and follow-up treatment have obvious influence on γ'  fan-structure morphology. Therefore, it is necessary to research scientifically and penetratingly on the formation conditions, formation mechanism, and the effects of different heat treatment process of γ'  fan-structure which exist as a kind of special organization morphology. The formation and evolution of fan-type structure in a new type nickel-based P/M superalloy FGH98I was studied by means of FESEM and TEM. The results show that the fan-type structure in alloy FGH98I consists of finger-shaped γ'  dendrites and the $\gamma$ matrix between them. It forms only in a selection area characteristic, nucleates inhomogeneously in the chemical segregation area at different scales on highly supersaturated grain boundary and develops by own concentration gradient diffusion. The standard aging makes the fan-type structure growing up and coarsening. The γ'  fingers become unstable, transforming into stable cubic shape γ'  in low-energy state after high-temperature aging.
Key wordsnickel-based powder metallurgy superalloy    fan-type structure    cooling rate    aging treatment
收稿日期: 2012-04-24     
ZTFLH: 

TF125.2

 
基金资助:

国家预研基金项目9140A12070507QT0202和国家高技术研究发展计划项目2007AA03A223资助

作者简介: 胡本芙, 男, 1937年生, 教授
[1] KaufmanM J, Voorhees PW, JohnsonWC, Biancanniello F S. Metall Trans, 1989; 20A: 2171

[2] Calderon H A, Kostorz G, Qu Y Y, Dorantes H J, Cruz J J, Cabanas–Moreno J G. Mater Sci Eng, 1997; A238: 13

[3] Minoru D, Toru M, Teruyaki W. Mater Sci Eng, 1984; A67: 249

[4] Via P C, Yu J J. Trans Nonferrous Met Soc China, 2005; 15(93): 90

[5] Jackson J J, Donachie M J. Metall Trans, 1977; 8A: 1615

[6] Larson J M, Volin T G, Larson F G. In: Braun J D, Arrowsmith H W, McCall J L, eds., Microstruct Sci, 1997; 5: 209

[7] Furrer D U. Scr Mater, 1999; 40: 1215

[8] Furrer D U. In: CSM, BISC, eds., Proc 11th Int Symposium on Advanced Superalloys–Production and Application, Shanghai: the Chinese Society for Metals, 2007: 192

[9] Mitchell R J, Li H Y, Huang Z W. J Mater Process Technol, 2009; 209: 1011

[10] Lu X D, Deng Q, Du J H, Qu J L, Zhuang J Y, Zhong Z Y. J Alloys Compd, 2009; 477: 100

[11] Lu X D, Du J H, Deng Q, Zhong Z Y. J Alloys Compd, 2009; 486: 195

[12] Wu K, Liu G Q, Hu B F. J Univ Sci Technol Beijing, 2009; 31: 722

[13] Lemsky J. NASA/CR–2004–212950

[14] Gabb T P, Gayda J. NASA/TM–2005–213649

[15] Hamid A, Schroers J. Acta Mater, 2002; 50: 89

[16] Staron P, Kampmann R. Acta Mater, 2000; 48: 701

[17] Williams D B, Butler E P. Int Mater Rev, 1981, 26: 153

[18] Staron P, Kampmann R. Acta Mater, 2000; 48: 713

[19] Mitchell R J, Preuss M. Mater Sci Eng, 2008; A473: 158

[20] Doi M, Miyazaki T. Mater Sci Eng, 1985; 74: 139

[21] Lifshitz I M, Slyozov V V. J Phys Chem Solids, 1961; 19: 35

[22] Wagner C. Z Electrochem, 1961; 65: 581
[1] 王法, 江河, 董建新. 高合金化GH4151合金复杂析出相演变行为[J]. 金属学报, 2023, 59(6): 787-796.
[2] 张月鑫, 王举金, 杨文, 张立峰. 冷却速率对管线钢中非金属夹杂物成分演变的影响[J]. 金属学报, 2023, 59(12): 1603-1612.
[3] 李闪闪, 陈云, 巩桐兆, 陈星秋, 傅排先, 李殿中. 冷速对高碳铬轴承钢液析碳化物凝固析出机制的影响[J]. 金属学报, 2022, 58(8): 1024-1034.
[4] 耿遥祥, 唐浩, 许俊华, 张志杰, 喻利花, 鞠洪博, 江乐, 简江林. 选区激光熔化高强Al-(Mn, Mg)-(Sc, Zr)合金成形性及力学性能[J]. 金属学报, 2022, 58(8): 1044-1054.
[5] 刘超, 姚志浩, 郭婧, 彭子超, 江河, 董建新. 粉末高温合金FGH4720Li在近服役温度下的组织演变规律[J]. 金属学报, 2021, 57(12): 1549-1558.
[6] 耿遥祥, 樊世敏, 简江林, 徐澍, 张志杰, 鞠洪博, 喻利花, 许俊华. 选区激光熔化专用AlSiMg合金成分设计及力学性能[J]. 金属学报, 2020, 56(6): 821-830.
[7] 王希,刘仁慈,曹如心,贾清,崔玉友,杨锐. 冷却速率对β凝固γ-TiAl合金硼化物和室温拉伸性能的影响[J]. 金属学报, 2020, 56(2): 203-211.
[8] 李亚强, 刘建华, 邓振强, 仇圣桃, 张佩, 郑桂芸. 15CrMoG钢包晶凝固特征与机制[J]. 金属学报, 2020, 56(10): 1335-1342.
[9] 郭军力, 文光华, 符姣姣, 唐萍, 侯自兵, 谷少鹏. 冷却速率对包晶钢凝固过程中包晶转变收缩的影响[J]. 金属学报, 2019, 55(10): 1311-1318.
[10] 毛轶哲, 李建国, 封蕾. 573 K高温时效处理的Al-10Mg合金中粗大β(Al3Mg2)相对热压缩组织演化的影响及机理[J]. 金属学报, 2018, 54(10): 1451-1460.
[11] 张可, 李昭东, 隋凤利, 朱正海, 章小峰, 孙新军, 黄贞益, 雍岐龙. 冷却速率对Ti-V-Mo复合微合金钢组织转变及力学性能的影响[J]. 金属学报, 2018, 54(1): 31-38.
[12] 陈瑞, 许庆彦, 郭会廷, 夏志远, 吴勤芳, 柳百成. Al-7Si-Mg铝合金拉伸过程应变硬化行为及力学性能模拟研究[J]. 金属学报, 2017, 53(9): 1110-1124.
[13] 谷倩倩, 阮莹, 朱海哲, 闫娜. 冷却速率对急冷Fe-Al-Nb三元合金凝固组织形成的影响[J]. 金属学报, 2017, 53(6): 641-647.
[14] 胡小锋,杜瑜宾,闫德胜,戎利建. Cu的析出及其对FeCrMoCu合金阻尼性能和力学性能的影响[J]. 金属学报, 2017, 53(5): 601-608.
[15] 刘少军, 杨光昱, 介万奇. Mg-Zn-Gd三元铸造镁合金的自由凝固路径选择*[J]. 金属学报, 2015, 51(5): 580-586.