金属学报  2011, Vol. 47 Issue (11): 1418-1425    DOI: 10.3724/SP.J.1037.2011.00307

论文 本期目录 | 过刊浏览 |

镍基合金DD10中γ/γ'晶格错配度厚度效应的X射线衍射分析

王有道, 吴尔冬, 王苏程, 李武会

中国科学院金属研究所沈阳材料科学国家(联合)实验室, 沈阳 110016

X-RAY DIFFRACTION ANALYSIS ON THE THICKNESS EFFECT OF γ/γ' LATTICE MISMATCHE IN NICKEL BASE SINGLE CRYSTAL SUPERALLOY DD10

WANG Youdao, WU Erdong, WANG Sucheng, LI Wuhui

Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016

王有道 吴尔冬 王苏程 李武会. 镍基合金DD10中γ/γ'晶格错配度厚度效应的X射线衍射分析[J]. 金属学报, 2011, 47(11): 1418-1425.
, , , . X-RAY DIFFRACTION ANALYSIS ON THE THICKNESS EFFECT OF γ/γ' LATTICE MISMATCHE IN NICKEL BASE SINGLE CRYSTAL SUPERALLOY DD10[J]. Acta Metall Sin, 2011, 47(11): 1418-1425.

摘要 参考文献 相关文章 Metrics 全文: PDF(1448 KB)   摘要: 利用四轴X射线衍射仪(XRD)测定片状DD10镍基单晶高温合金减薄至不同厚度时基体相(γ)和沉淀强化相(γ')的晶格常数. 根据减薄过程中两相间约束变化得到晶格常数和错配度变化规律, 计算出合金从三维块体错配应力状态向二维平面应力状态转化达到失稳状态的临界厚度以及与不同应力状态对应的晶格错配度. 依照一定的假设条件, 推算出与应力松弛条件对应的无错配应力状态下两相的晶格常数. 分析结果表明: 合金减薄达到临界厚度后, γ'相晶格常数随厚度减小而线性变小, γ相晶格常数无明显变化, 与此对应的晶格错配度绝对值变大; 减薄过程伴随γ/γ'两相间约束的减弱和相间微观应力松弛, 晶格取向差和晶体嵌镶度增大, 表层应力状态向平面应力状态转化. 测量得到的临界厚度与无错配应力状态下的晶格常数可为高温合金单晶材料的应用设计和残余应力测试提供参考. 关键词 ： 镍基单晶高温合金,  晶格常数,  晶格错配度,  XRD     Abstract：The lattice constants of the matrix phase γ and the precipitated phase γ'  in a wafer-like nickel-base single crystal superalloy DD10 were determined by four-axis X-ray diffractometer (XRD). The variations of the lattice constants and lattice mismatches of γ and γ'  phases in the alloy wafer with different thicknesses, i.e., different interphase restriction conditions were obtained. A critical thickness of the alloy wafer to reach an unstable stress state was defined based on the observed changes of lattice mismatch associated with a transformation of stress state from the 3D bulk state to 2D plane state. The lattice mismatches corresponding to different mismatch stress states were calculated. The lattice constants of the γ and γ'  phases under a relaxed non--mismatch stress state were evaluated based on certain assumptions. The results showed that after the thickness of the alloy wafer reached the critical value, the lattice constant of the γ'  phase decreased linearly with the decrease of the thickness, whereas that of the γ phase kept nearly constant, resulting in a linear increase of the absolute value of lattice mismatch. Accompanied with the thinning process, the crystal lattice misorientation and the mosaicity increased, the γ/γ'  interphase restraint reduced and the interphase stress relaxed, and the measured stress state changed to the plane state. The estimated critical thickness and the lattice constants under non-mismatch stress state could provide references for the design of the components and the measurement of the residual stress in the superalloy. Key words： nickel-base single superalloy    lattice constant    lattice mismatch    XRD 收稿日期: 2011-05-16      ZTFLH:  TG132.32   基金资助: 国家自然科学基金项目51071157和国家高技术研究发展计划项目2009AA03Z535资助 作者简介: 王有道, 男, 1985年生, 硕士生 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 王有道 吴尔冬 王苏程 李武会 44.8K 链接本文: https://www.ams.org.cn/CN/10.3724/SP.J.1037.2011.00307      或      https://www.ams.org.cn/CN/Y2011/V47/I11/1418 [1] Glatzel U, Feller–Kniepmejer M. Scr Metall, 1989; 23: 1839 [2] Kuhn H A, Biermann H, Ungar T, Mughrabi H. Acta Metall, 1991; 39: 2783 [3] Socrate S, Parks D M. Acta Metall Mater, 1993; 41: 2185 [4] Mukherji D, Gilhs R, Barbier B, Genovese D D, Hasse B, Strunz P, Wroblewski T, Fuess H, Rosler J. Scr Mater, 2003; 48: 333 [5] Meng F L, Tian S G, Wang M G, Yu X F, Du H Q, Shui L, Hu Z Q. Chin J Mater Res, 2007; 21: 228 (孟凡来, 田素贵, 王明罡, 于兴福, 杜洪强, 水丽, 胡壮麒. 材料研究学报, 2007; 21: 228) [6] Hu Z Q, Peng P, Liu Y, Jin T, Sun X F. Acta Metall Sin, 2002; 38: 1121 (胡壮麒, 彭平, 刘 轶, 金涛, 孙晓峰, 管恒荣. 金属学报, 2002; 38: 1121) [7] Marty B, Moretto P, Gergaud P, Lebrun J L, Ostolaza K, Ji V. Acta Mater, 1997; 45: 791 [8] Wu E D, Zhang J, Chen B, Sun G A, Ji V, Hughes D, Pirling T. J Phys: Condens Matter, 2008; 20: 104255 [9] Merchant H D. J Electron Mater, 1997; 26: 833 [10] Hyun S, Brown W L, Vinci R P. Appl Phys Lett, 2003; 83: 4411 [11] Gilles R, Mukherji D, Hoelzel M, Strunz P, Toebbens D M, Barbier B. Acta Mater, 2006; 54: 1313 [12] Mukherji D, Wahi R P. Scr Mater, 1997; 36: 1233 [13] M¨uller L, Glatzel U, Feller–Kniepmeier M. Acta Metall Mater, 1992; 40: 1321 [14] Muller L, Link T, Feller–Kniepmeier M. Scr Metall, 1992; 26: 1298 [15] Floreen S. Eng Fract Mech, 1979; 11: 55 [16] Yue Z F, Lu Z Z, Zhou L, Zheng C Q. Acta Metal Sin, 1997; 33: 265 (岳珠峰, 吕震宙, 周 利, 郑长卿. 金属学报, 1997; 33: 265) [17] Orosz R, Krupp U, Christ H J, Monceau D. Oxid Met, 2007; 68: 165 [18] Pant P, Schwarz K W, Baker S P. Acta Mater, 2003; 51: 3243 [19] Ganghoffer J F, Hazotte A, Denis S, Simon A. Scr Metall Mater, 1991; 25: 2491 [1] 赵鹏, 谢光, 段慧超, 张健, 杜奎. 两种高代次镍基单晶高温合金热机械疲劳中的再结晶行为[J]. 金属学报, 2023, 59(9): 1221-1229. [2] 张子轩, 于金江, 刘金来. 镍基单晶高温合金DD432的持久性能各向异性[J]. 金属学报, 2023, 59(12): 1559-1567. [3] 徐静辉, 李龙飞, 刘心刚, 李辉, 冯强. 热力耦合对一种第四代镍基单晶高温合金1100℃蠕变组织演变的影响[J]. 金属学报, 2021, 57(2): 205-214. [4] 和思亮, 赵云松, 鲁凡, 张剑, 李龙飞, 冯强. 热等静压对铸态及固溶态第二代镍基单晶高温合金显微缺陷及持久性能的影响[J]. 金属学报, 2020, 56(9): 1195-1205. [5] 胡斌,李树索,裴延玲,宫声凯,徐惠彬. <111>取向小角偏离对一种镍基单晶高温合金蠕变性能的影响[J]. 金属学报, 2019, 55(9): 1204-1210. [6] 马晋遥,王晋,赵云松,张剑,张跃飞,李吉学,张泽. 一种第二代镍基单晶高温合金1150 ℃原位拉伸断裂机制研究[J]. 金属学报, 2019, 55(8): 987-996. [7] 张宇, 王清, 董红刚, 董闯, 张洪宇, 孙晓峰. 基于团簇模型设计的镍基单晶高温合金(Ni, Co)-Al-(Ta, Ti)-(Cr, Mo, W)及其在900 ℃下1000 h的长期时效行为[J]. 金属学报, 2018, 54(4): 591-602. [8] 郭静, 李金国, 刘纪德, 黄举, 孟祥斌, 孙晓峰. 低偏析异质籽晶制备单晶高温合金的籽晶熔合区形成机制研究[J]. 金属学报, 2018, 54(3): 419-427. [9] 王博,张军,潘雪娇,黄太文,刘林,傅恒志. W对第三代镍基单晶高温合金组织稳定性的影响[J]. 金属学报, 2017, 53(3): 298-306. [10] 郁峥嵘,丁贤飞,曹腊梅,郑运荣,冯强. 第二、三代镍基单晶高温合金含Hf过渡液相连接*[J]. 金属学报, 2016, 52(5): 549-560. [11] 濮晟,谢光,王莉,潘智毅,楼琅洪. Re和W对铸态镍基单晶高温合金再结晶的影响*[J]. 金属学报, 2016, 52(5): 538-548. [12] 王玉敏,李双明,钟宏,傅恒志. 定向凝固DD6单晶高温合金枝晶组织均匀性研究[J]. 金属学报, 2015, 51(9): 1038-1048. [13] 濮晟, 谢光, 郑伟, 王栋, 卢玉章, 楼琅洪, 冯强. W和Re对固溶态镍基单晶高温合金变形和再结晶的影响*[J]. 金属学报, 2015, 51(2): 239-248. [14] 金涛,周亦胄,王新广,刘金来,孙晓峰,胡壮麒. 先进镍基单晶高温合金组织稳定性及力学行为的研究进展[J]. 金属学报, 2015, 51(10): 1153-1162. [15] 王莉,周忠娇,张少华,降向冬,楼琅洪,张健. 镍基单晶高温合金冷热循环过程中圆孔周围裂纹萌生与扩展行为[J]. 金属学报, 2015, 51(10): 1273-1278. Viewed Full text Abstract Cited   Shared      Discussed