Acta Metall Sin  1998, Vol. 34 Issue (10): 1028-1032    DOI:

Current Issue | Archive | Adv Search |

INFLUENCE OF QUENCHING CONDITIONS AND MICRO-ADDITION OF CERIUM ON THERMAL STABILITY OF AMORPHOUS Fe-B-Si ALLOYS

CHE Xiaozhou; ZHU Min; LI Zuxin(Department of Mechano-Electronic Engineering; South China University of Technology; Guangzhou 510641)DAI Lizhi(Central Iron and Steel Research Institute; Beijing 100081)Correspondent: CHE Xiaozhou;associate professor;Tel: (020)87111317

CHE Xiaozhou; ZHU Min; LI Zuxin(Department of Mechano-Electronic Engineering; South China University of Technology; Guangzhou 510641)DAI Lizhi(Central Iron and Steel Research Institute; Beijing 100081)Correspondent: CHE Xiaozhou;associate professor;Tel: (020)87111317. INFLUENCE OF QUENCHING CONDITIONS AND MICRO-ADDITION OF CERIUM ON THERMAL STABILITY OF AMORPHOUS Fe-B-Si ALLOYS. Acta Metall Sin, 1998, 34(10): 1028-1032.

Abstract References Related Articles Recommended Metrics Download:  PDF(508KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The influences of melt spun parameters and dricro-addition of cerium on thermal stability of amorphous Fe-B-Si alloys have been studied. The higher cooling speed foras-quenched amorphous ribbon, the more difficult for structural relaxation in low-temperatureannealing process. Experimental results show no direct relationship between the quenching condition and crystallization for Fe80B11.5Si8.5 metallic glass. Optimal addition of cerium obviouslyretard the ductile-to-brittle transition process in structural relaxation stage, when annealingtemperature is low. At high temperature annealing stage, the addition of cerium lowers the onsettemperature of crystallization; and this effect is in direct proportion to the content of cerium inribbons. Key words:  amorphous Fe-B-Si      thermal stability      quenching condition      rare-earth element      Received:  18 October 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I10/1028 1车晓舟.金属学报, 1995; 31: B418(Che X Z. Acta Metall Sin, 1995; 31: B418) 2姚斌,华中,闵春宗,王爱民,刘浩哲,丁炳哲,胡壮麟.金属学报,1996;32:867(Yao B, Hua Z, Min C Z, Wang A M, Liu H Z, Ding B Z, Hu Z Q. Acta Metall Sin, 1996; 32: 867) 3沈德久,王玉林,沈中毅,殷岫君.金属学报,1997;33:621(Shen D J, Wang Y L, Shen Z Y, Yin X J. Acta Metall Sin, 1997; 33: 621) 4晁月盛,滕功清,谢春辉,耿岩,赖祖涵.金属学报.1996;32: 1204(Chao Y S,Teng G Q,Xie C H,Geng Y,Lai Z H. Acta Metall Sin,1996; 32:1204) 5Luborsky P E, Walter J L.J Appl Phgs, 1976 47: 3648 6Gerling R,Schimansky F P,Wagner R.Int J Rapid Solidif,1990; 5:137 7Chen H S. J Appl Phys, 1978; 49: 3289 8KroegerD M,Canright G S,MaKamey CG,Easton D S,Scarbrough J O.Acta Metall,1987;35:989 9Liebermann H H, Marti J, Martis R J, Wong C P. Metall Trans, 1989; 20A: 63i [1] YUAN Jianghuai, WANG Zhenyu, MA Guanshui, ZHOU Guangxue, CHENG Xiaoying, WANG Aiying. Effect of Phase-Structure Evolution on Mechanical Properties of Cr2AlC Coating[J]. 金属学报, 2023, 59(7): 961-968. [2] FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti2AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786. [3] NIE Jinfeng, WU Yuli, XIE Kewei, LIU Xiangfa. Microstructure and Thermal Stability of Heterostructured Al-AlN Nanocomposite[J]. 金属学报, 2022, 58(11): 1497-1508. [4] WANG Yihan, YUAN Yuan, YU Jiabin, WU Honghui, WU Yuan, JIANG Suihe, LIU Xiongjun, WANG Hui, LU Zhaoping. Design for Thermal Stability of Nanocrystalline Alloys Based on High-Entropy Effects[J]. 金属学报, 2021, 57(4): 403-412. [5] WANG Xiaobo, WANG Yongzhe, CHENG Xudong, JIANG Rong. Thermal Stability of AlCrON-Based Solar Selective Absorbing Coating in Air[J]. 金属学报, 2021, 57(3): 327-339. [6] PENG Yanyan, YU Liming, LIU Yongchang, MA Zongqing, LIU Chenxi, LI Chong, LI Huijun. Effect of Ageing Treatment at 650 ℃ on Microstructure and Properties of 9Cr-ODS Steel[J]. 金属学报, 2020, 56(8): 1075-1083. [7] HUANG Yu, CHENG Guoguang, LI Shijian, DAI Weixing. Precipitation Mechanism and Thermal Stability of Primary Carbide in Ce Microalloyed H13 Steel[J]. 金属学报, 2019, 55(12): 1487-1494. [8] Jianxiong ZOU,Bo LIU,Liwei LIN,Ding REN,Guohua JIAO,Yuanfu LU,Kewei XU. Microstructure and Thermal Stability of MoC DopedRu-Based Alloy Films as Seedless Diffusion Barrier[J]. 金属学报, 2017, 53(1): 31-37. [9] Weiwei GUO,Chengjun QI,Xiaowu LI. INVESTIGATIONS ON THERMAL STABILITY OF FATIGUE DISLOCATION STRUCTURES IN CONJUGATE AND CRITICAL DOUBLE-SLIP-ORIENTED Cu SINGLE CRYSTALS[J]. 金属学报, 2016, 52(6): 761-768. [10] YANG Bin, LI Xin, LUO Wendong, LI Yuxiang. EFFECT OF MINOR Sn AND Nb ADDITIONS ON THE THERMAL STABILITY AND COMPRESSIVE PLASTICITY OF Zr-Cu-Fe-Al BULK METALLIC GLASS[J]. 金属学报, 2015, 51(4): 465-472. [11] LIU Wenbo, ZHANG Chi, YANG Zhigang, XIA Zhixin, GAO Guhui, WENG Yuqing. EFFECT OF SURFACE NANOCRYSTALLIZATION ON MICROSTRUCTURE AND THERMAL STABILITY OF REDUCED ACTIVATION STEEL[J]. 金属学报, 2013, 49(6): 707-716. [12] ZHANG Lidong, WANG Fei, CHEN Shunli, WANG Yuan. FABRICATION AND THERMAL STABILITY OF AlCrTaTiNi/(AlCrTaTiNi)N BILAYER DIFFUSION BARRIER[J]. 金属学报, 2013, 49(12): 1611-1616. [13] FANG Lu,DING Xianfei, ZHANG Laiqi, HAO Guojian, LIN Junpin. MICROSTRUCTURE STABILITY IN A FULLY LAMELLAR HIGH Nb－TiAl ALLOY AFTER LONG－TERM THERMAL CYCLING[J]. 金属学报, 2013, 49(11): 1416-1422. [14] ZHANG Yanpo, REN Ding, LIN Liwei,YANG Bin, WANG Shanling,LIU Bo1), XU Kewei. CONTROLLED REACTION ON INTERFACE OF Cu/Cu(Ge, Zr)/SiO2/Si MULTILAYER FILM AND ITS THERMAL STABILITY[J]. 金属学报, 2013, 49(10): 1264-1268. [15] GUO Weiwei, QI Chengjun, LI Xiaowu. INVESTIGATIONS ON THERMAL STABILITY OF FATIGUE DISLOCATION STRUCTURES IN A DOUBLE-SLIPORIENTED Cu SINGLE CRYSTAL[J]. 金属学报, 2013, 49(1): 107-114. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed