|
|
MICROSTRUCTURE EVOLUTION AND DEFORMATION BEHAVIOR OF HIGH MANGANESE TRIP/TWIP SYMBIOTIC EFFECT STEELS UNDER HIGH-SPEED DEFORMATION |
TANG Zhengyou, WU Zhiqiang, ZAN Na, DING Hua |
School of Materials and Metallurgy, Northeastern University, Shenyang 110089 |
|
Cite this article:
TANG Zhengyou WU Zhiqiang ZAN Na DING Hua. MICROSTRUCTURE EVOLUTION AND DEFORMATION BEHAVIOR OF HIGH MANGANESE TRIP/TWIP SYMBIOTIC EFFECT STEELS UNDER HIGH-SPEED DEFORMATION. Acta Metall Sin, 2011, 47(11): 1426-1433.
|
Abstract The high manganese TRIP/TWIP symbiotic effect steel exhibits excellent combination of strength and elongation due to the transformation-induced plasticity and twinning-induced plasticity. In this paper, by means of a Zwick HTM 5020 high rate tensile test machine, the mechanical behavior of 18Mn-3Al-3Si and 21Mn-3Al-3Si high manganese TRIP/TWIP symbiotic effect steels under dynamic condition, strain hardening rate, true stress and strain hardening exponent show fluctuating with the true stain change, which is caused by the interaction between strain hardening and matrix softening. The microstructure evolution of the specimen was analyzed by OM, SEM, TEM and XRD. The results indicate that the transformation route is γ→ε, ε→α, under high-speed deformation; hindering of high-speed deformation to slip, transformation from austenite to martensite, and refinement of austenite matrix due to deformation twins are the main factors of strain hardening; while adiabatic temperature rise effect, ε→γ reverse transformation and dynamic recrystallization of twins make the matrix softening.
|
Received: 16 May 2011
|
|
Fund: Supported by National Natural Science Foundation of China (No.50901014) and Fundamental Research Funds for the Central Universities (No.N100402006) |
[1] Curtze S, Kuokkala V T. Acta Mater, 2010; 58: 5129[2] Bracke L, Mertens G, Penning J, Comman B C, Liebenherr M, Akdut N. Metall Mater Trans, 2006; 37A: 307[3] Huang B X, Wang X D, Rong Y H, Wang L, Jin L. Mater Sci Eng, 2006; A438–440: 306[4] Park K T, Kim G, Kim S K, Lee S W, Hwang S W, Lee C S. Met Mater Int, 2010; 16: 1[5] Durrenerger L, Molinari A, Rusinek A. Mater Sci Eng, 2008; A478: 297[6] Frommeyer D, Brux U, Neumann P. ISIJ Int, 2003; 43: 438[7] Allain S, Chateau J P, Bouaziz O. Mater Sci Eng, 2004; A387: 143[8] Allain S, Chateau J P, Dahmoun D, Bouaziz O. Mater Sci Eng, 2004; A387: 272[9] Lee Y K, Choi C S. Metall Mater Trans, 2000; 31A: 355[10] Yang P, Lu F Y, Meng L, Cui F E. Acta Metall Sin, 2010; 46: 666(杨平, 鲁法云, 孟利, 崔凤娥. 金属学报, 2010; 46: 666)[11] Lu F Y, Meng L, Yang P, Cui F E. J Chin Electron Microsc Soc, 2009; 28: 23(鲁法云, 孟利, 杨平, 崔凤娥. 电子显微学报, 2009; 28: 23)[12] Lu F Y, Yang P, Meng L, Mao W M. Acta Metall Sin, 2010; 46: 1153(鲁法云, 杨平, 孟利, 毛卫民. 金属学报, 2010; 46: 1153)[13] Lu Y P, Hutchinson B, Molodov D A, Gottstein G. Acta Mater, 2010; 58: 3079[14] Sawauchi T, Bujoreanu L G, Kikuchi T, Ogawa K, Murakamic M. Scr Mater, 2008; 59: 826[15] Sahu P, Curtze S, Das A, Mahato B, Chowdhury S G. Scr Mater, 2010; 62: 5 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|