Acta Metall Sin  1995, Vol. 31 Issue (13): 35-39    DOI:

Current Issue | Archive | Adv Search |

SUPERPLASTICITY IN Fe_3Al ALLOY WITH LARGE GRAINS

SHAN Aidang;LIN Dongliang; CHEN Mingwei; LI Dingqiang(Shanghai Jiaotong Universitty; Shanghai 200030)(Manuscript received. 94-05-12)

SHAN Aidang;LIN Dongliang; CHEN Mingwei; LI Dingqiang(Shanghai Jiaotong Universitty; Shanghai 200030)(Manuscript received. 94-05-12). SUPERPLASTICITY IN Fe_3Al ALLOY WITH LARGE GRAINS. Acta Metall Sin, 1995, 31(13): 35-39.

Abstract References Related Articles Recommended Metrics Download:  PDF(351KB)  Export:  BibTeX | EndNote (RIS)       Abstract  High temperature deformation behaviour of Fe-28Al-2Ti alloy with large grains was examined. This alloy showed superplasticity in the temperature range of 750℃ to 900℃ under a strain rate of 1 × 10~(-3)/ s and maintained superplastic it at 850℃ in a relatively wide range of strain rate. The highest m value may exceed 500%. At 850℃ . m value changes from 0.22 to 0.41 under different strain rates. Optical and TEM observations revealed that a dynamic recrystallization process took place with the deformation process and this in turn resulted in the superplasticity in this alloy with large grains Correspondent: LIN Dongliang,professor , Department of Materials Science, Shanghai Jiaotong University,Shanghai 200030 Key words:  Fe_3Al      intermetallics      large grains      superplasticity      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1995/V31/I13/35 1McKameyCG,DeVanJH,TortorelliPF,SikkaVK．JMaterRes,1991;16:17792LiuCT,LeeEH,McKameyCG．ScrMetall,1989;23:8753LiuCT,McKameyCG,LeeEH,ScrMetallMater,1990;24:3854SikkaVK．ProceedingofStructuralIntermetallicsTMSSymposium．19935StoloffNS．ActaMetall,1964:12:4736MendirattaMG,LipsittHA．MetallTrans,1987;18A:2837DiehmRS,MikkolaD．E,In:LiuCTetal．eds．HighTemperatureOrderedIntermetallicAlloys,Vol．8l,Pittsburgh:MaterialsResearchSociety,1987;3298NiehTG,MayoMJ,KobayashM,WadsworthJ．Superplasiicity,inMetals,CeramicandIntermetallics,Pittsburgh:MaterialsResearchSociety．196:1899OchiaiS,KobayashM,MichimnraK,MayoMJ,KobayashM,WadsworthJ．SuperplasticityinMetals,CeramicandIntermetallics,Pittsburgh,MaterialsResearchSociety,196:20110BackofenWA,TurnerIR．AveryDH．TransASM,1964;57:98011GriffithP,HammondC．ActaMetall,1972;20:93512GhoshAK．AyresRA,MetallTrans,1976;7A:1589d [1] WANG Huiyuan, XIA Nan, BU Ruyu, WANG Cheng, ZHA Min, YANG Zhizheng. Current Research and Future Prospect on Low-Alloyed High-Performance Wrought Magnesium Alloys[J]. 金属学报, 2021, 57(11): 1429-1437. [2] GONG Shengkai, SHANG Yong, ZHANG Ji, GUO Xiping, LIN Junpin, ZHAO Xihong. Application and Research of Typical Intermetallics-Based High Temperature Structural Materials in China[J]. 金属学报, 2019, 55(9): 1067-1076. [3] Guangming XIE, Zongyi MA, Peng XUE, Zongan LUO, Guodong WANG. Effects of Tool Rotation Rates on Superplastic Deformation Behavior of Friction Stir Processed Mg-Zn-Y-Zr Alloy[J]. 金属学报, 2018, 54(12): 1745-1755. [4] Lin GENG, Hao WU, Xiping CUI, Guohua FAN. Recent Progress on the Fabrication of TiAl-Based Composites Sheet by Reaction Annealingof Elemental Foils[J]. 金属学报, 2018, 54(11): 1625-1636. [5] Huiyuan WANG, Hang ZHANG, Xinyu XU, Min ZHA, Cheng WANG, Pinkui MA, Zhiping GUAN. Current Research and Future Prospect on Microstructure Stability of Superplastic Light Alloys[J]. 金属学报, 2018, 54(11): 1618-1624. [6] Xuan YU, Zhihao ZHANG, Jianxin XIE. Microstructure, Ordered Structure and Warm TensileDuctility of Fe-6.5%Si Alloy with Various Ce Content[J]. 金属学报, 2017, 53(8): 927-936. [7] Li ZHOU,Chao CUI,Qing JIA,Yingshi MA. Experimental and Finite Element Simulation of Milling Process for γ-TiAl Intermetallics[J]. 金属学报, 2017, 53(4): 505-512. [8] Jihou LIU,Hongyun ZHAO,Zhuolin LI,Xiaoguo SONG,Hongjie DONG,Yixuan ZHAO,Jicai FENG. Microstructures and Mechanical Properties of Cu/Sn/Cu Structure Ultrasonic-TLP Joint[J]. 金属学报, 2017, 53(2): 227-232. [9] Guotian WANG, Hongsheng DING, Ruirun CHEN, Jingjie GUO, Hengzhi FU. Effect of Current Intensity on Microstructure of Ni3Al Intermetallics Prepared by Directional Solidification Electromagnetic Cold Crucible Technique[J]. 金属学报, 2017, 53(11): 1461-1468. [10] Tong LIU,Liangshun LUO,Yanning ZHANG,Yanqing SU,Jingjie GUO,Hengzhi FU. MICROSTRUCTURE EVOLUTION AND GROWTH BEHAVIORS OF FACETED PHASE IN DIRECTIONALLYSOLIDIFIED Al-Y ALLOYS II. Microstructure Evolution of Directionally Solidified Al-53%Y Peritectic Alloy[J]. 金属学报, 2016, 52(7): 866-874. [11] Rui YANG,Yan PAN,Wei CHEN,Qiaoyan SUN,Lin XIAO,Jun SUN. DEFORMATION BEHAVIOR AND THE MECHANISM OF MICRO-SCALE Ti-10V-2Fe-3Al PILLARSIN COMPRESSION[J]. 金属学报, 2016, 52(2): 135-142. [12] Chao YANG,Jijie WANG,Zongyi MA,Dingrui NI,Mingjie FU,Xiaohua LI,Yuansong ZENG. FRICTION STIR WELDING AND LOW-TEMPERATURE SUPERPLASTICITY OF 7B04 Al SHEET[J]. 金属学报, 2015, 51(12): 1449-1456. [13] FU Mingjie, HAN Xiuquan, WU Wei, ZHANG Jianwei. SUPERPLASTICITY RESEARCH OF Ti-23Al-17Nb ALLOY SHEET[J]. 金属学报, 2014, 50(8): 955-961. [14] MA Pinkui, SONG Yuquan. BINOCULAR STEREO VISION MEASUREMENT RESEARCH FOR SUPERPLASTIC FREE BULGING[J]. 金属学报, 2014, 50(4): 471-478. [15] GUAN Zhiping, MA Pinkui, SONG Yuquan. ANALYSIS OF FRACTURE DURING SUPERPLASTIC TENSION[J]. 金属学报, 2013, 49(8): 1003-1011. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed