Acta Metall Sin  1997, Vol. 33 Issue (5): 467-472    DOI:

Current Issue | Archive | Adv Search |

SOLUTION OF HEAT CONDUCTION INVERSE PROBLEM FOR STEEL 45 DURING QUENCHING

CHENG Heming;WANG Honggang;CHEN Tieli (Kunming University of Science and Technology; Kunming 650093)

CHENG Heming;WANG Honggang;CHEN Tieli (Kunming University of Science and Technology; Kunming 650093). SOLUTION OF HEAT CONDUCTION INVERSE PROBLEM FOR STEEL 45 DURING QUENCHING. Acta Metall Sin, 1997, 33(5): 467-472.

Abstract References Related Articles Recommended Metrics Download:  PDF(462KB)  Export:  BibTeX | EndNote (RIS)       Abstract  An effectual method that can determinate the surface heat-transfer coefficients was given by means of the solution of the inverse problem of the heat conduction for steel 45 cylinder with phase transformation during quenching. The technique is composed of numerical methods and determination of the relationship between time and temperature,and suited for various quenchants. It can avoid the considerable discrepancies in the obtained value due to small variation in the experimental condition.In the numerical calculation, the thermal physical properties of materials were treated as the functions of temperature and the volume fraction of consituent of phase transformation. Key words:  quenching      heat conduction      finite difference      phase transformation      steel 45      Received:  18 May 1997      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1997/V33/I5/467 1Prince R F,Fletcher A J.Met Technol,1980;2:203 2Denis S,Farias D,Simon A.ISIJ Int,1992;32:316 3Tzitzlkov I,Hougardy H P,Rose A.Arch Eisenhuttenwes,1974;45:525 4Majorek A.Programmdokumentation.Institut fuer Werkstoffkunde,University Karlsruhe,1992:42 5Adams J A,Rogers D F.Computer-aided Heat Transfer Analysis.New York:McGraw-Hill.1973:145 6Bates C E,Totten G E,Brennan R L.ASM Int,1991;2:72 [1] BAI Jiaming, LIU Jiantao, JIA Jian, ZHANG Yiwen. Creep Properties and Solute Atomic Segregation of High-W and High-Ta Type Powder Metallurgy Superalloy[J]. 金属学报, 2023, 59(9): 1230-1242. [2] FENG Aihan, CHEN Qiang, WANG Jian, WANG Hao, QU Shoujiang, CHEN Daolun. Thermal Stability of Microstructures in Low-Density Ti2AlNb-Based Alloy Hot Rolled Plate[J]. 金属学报, 2023, 59(6): 777-786. [3] CHENG Yuanyao, ZHAO Gang, XU Deming, MAO Xinping, LI Guangqiang. Effect of Austenitizing Temperature on Microstructures and Mechanical Properties of Si-Mn Hot-Rolled Plate After Quenching and Partitioning Treatment[J]. 金属学报, 2023, 59(3): 413-423. [4] ZHANG Kaiyuan, DONG Wenchao, ZHAO Dong, LI Shijian, LU Shanping. Effect of Solid-State Phase Transformation on Stress and Distortion for Fe-Co-Ni Ultra-High Strength Steel Components During Welding and Vacuum Gas Quenching Processes[J]. 金属学报, 2023, 59(12): 1633-1643. [5] WANG Chongyang, HAN Shiwei, XIE Feng, HU Long, DENG Dean. Influence of Solid-State Phase Transformation and Softening Effect on Welding Residual Stress of Ultra-High Strength Steel[J]. 金属学报, 2023, 59(12): 1613-1623. [6] LI Sai, YANG Zenan, ZHANG Chi, YANG Zhigang. Phase Field Study of the Diffusional Paths in Pearlite-Austenite Transformation[J]. 金属学报, 2023, 59(10): 1376-1388. [7] LI Xiaobing, QIAN Kun, SHU Lei, ZHANG Mengshu, ZHANG Jinhu, CHEN Bo, LIU Kui. Effect of W Content on the Phase Transformation Behavior in Ti-42Al-5Mn- xW Alloy[J]. 金属学报, 2023, 59(10): 1401-1410. [8] MA Zhimin, DENG Yunlai, LIU Jia, LIU Shengdan, LIU Honglei. Effect of Quenching Rate on Stress Corrosion Cracking Susceptibility of 7136 Aluminum Alloy[J]. 金属学报, 2022, 58(9): 1118-1128. [9] FENG Miaomiao, ZHANG Hongwei, SHAO Jingxia, LI Tie, LEI Hong, WANG Qiang. Prediction of Macrosegregation of Fe-C Peritectic Alloy Ingot Through Coupling with Thermodynamic Phase Transformation Path[J]. 金属学报, 2021, 57(8): 1057-1072. [10] LI Xueda, LI Chunyu, CAO Ning, LIN Xueqiang, SUN Jianbo. Crystallography of Reverted Austenite in the Intercritically Reheated Coarse-Grained Heat-Affected Zone of High Strength Pipeline Steel[J]. 金属学报, 2021, 57(8): 967-976. [11] LI Jinshan, TANG Bin, FAN Jiangkun, WANG Chuanyun, HUA Ke, ZHANG Mengqi, DAI Jinhua, KOU Hongchao. Deformation Mechanism and Microstructure Control of High Strength Metastable β Titanium Alloy[J]. 金属学报, 2021, 57(11): 1438-1454. [12] LIU Chenxi, MAO Chunliang, CUI Lei, ZHOU Xiaosheng, YU Liming, LIU Yongchang. Recent Progress in Microstructural Control and Solid-State Welding of Reduced Activation Ferritic/Martensitic Steels[J]. 金属学报, 2021, 57(11): 1521-1538. [13] CHEN Xiang,CHEN Wei,ZHAO Yang,LU Sheng,JIN Xiaoqing,PENG Xianghe. Assembly Performance Simulation of NiTiNb Shape Memory Alloy Pipe Joint Considering Coupling Effect of Phase Transformation and Plastic Deformation[J]. 金属学报, 2020, 56(3): 361-373. [14] ZHU Weiqiang, YU Muzhi, TANG Xu, CHEN Xiaoyang, XU Zhengbing, ZENG Jianmin. Effect of Er and Si on Thermal Conductivity and Latent Heat of Phase Transformation of Aluminum-Based Alloy[J]. 金属学报, 2020, 56(11): 1485-1494. [15] Yaqiang TIAN,Geng TIAN,Xiaoping ZHENG,Liansheng CHEN,Yong XU,Shihong ZHANG. C and Mn Elements Characterization and Stability of Retained Austenite in Different Locations ofQuenching and Partitioning Bainite Steels[J]. 金属学报, 2019, 55(3): 332-340. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed