Please wait a minute...
金属学报  2008, Vol. 44 Issue (6): 698-702     
  论文 本期目录 | 过刊浏览 |
连铸结晶器内簇状夹杂物分形生长的Monte--Carlo模拟
雷洪;赫冀成
东北大学材料电磁过程研究教育部重点实验室
Monte-Carlo Simulation for Fractal Growth of inclusions in the Continuous Casting Mold
;Jicheng He
东北大学材料电磁过程研究教育部重点实验室
引用本文:

雷洪; 赫冀成 . 连铸结晶器内簇状夹杂物分形生长的Monte--Carlo模拟[J]. 金属学报, 2008, 44(6): 698-702 .
, . Monte-Carlo Simulation for Fractal Growth of inclusions in the Continuous Casting Mold[J]. Acta Metall Sin, 2008, 44(6): 698-702 .

全文: PDF(1346 KB)  
摘要: 建立夹杂物分形长大数学模型来描述连 铸结晶器内夹杂物的动态长大过程.采用Euler方法给出了连铸结 晶器内钢液流动和夹杂物的三维分布, 采用Lagrange方法跟踪单个夹杂物颗粒在夹杂物浓度场中的运动来研究 其碰撞、长大过程. 计算结果表明: 钢液的夹带作用是影响夹杂物分布的关键因 素.钢液流动和夹杂物分布在连 铸机内均具有上、下两个循环区, 在出口处具有“W”分布特征.对于单个夹杂物, 由于种子夹杂物不断吸附其 它夹杂物, 因此较大粒径的夹杂物具有多个突起和触手, 呈簇状形态.
关键词 湍流夹杂物动态长大随机雨模型分形    
Abstract:A mathematical model was developed to describe the inclusion dynamic growth process in the continuous casting mold. This model includes Eulerian method to predict turbulent flow and inclusion distribution in the continuous casting mold, and Lagrangian method to trace single inclusion in the inclusion concentration field and to study its collision and aggregation. Numerical results show that fluid flow is the key factor to affect inclusion’s distribution. In the continuous caster, the liquid steel and the inclusions have the upper and lower recirculation, and have “W” distribution at the exit. For the single inclusion, the seed inclusions can grasp the other inclusions continuously, thus, the bigger inclusions are dendritic with some tips and arms.
Key wordsTurbulent Flow    Inclusion    Dynamic Growth    Random Rain Model    Fractals    Euler-Lagrange Method
收稿日期: 2007-11-05     
ZTFLH:  TF777.1  
[1]Zhang L.Steel Res lnt,2005;76:784
[2]Lei H,Zhu M Y,He J C.J Iron Steel Res lnt,2003:10(2): 21
[3]Aboutalebi M R,Hasan M,Guthrie R I L.Metall Mater Trans,1995;26B:731
[4]Miki Y,Shimada Y,Thomas B G,Denissov A.Iron Steel- maker,1997;24(8):31
[5]Zhang B W,Deng K,Lci Z S,Ren Z M.Acta Metall Sin, 2004;40:623 (张邦文,邓康,雷作胜,任忠鸣.金属学报,2004:40:623)
[6]Zhang L,Taniguchi S,Cai K.Metall Mater Trans,2000; 31B:253
[7]Nakanishi K,Szekely J.Trans ISIJ,1975;15:522
[8]Javurek M,Gittlcr P,Rossler R,Kaufmann B,Prcblinger H.Steel Res lnt,2005;76:64
[9]Sinha A K,Sahai Y.ISIJ lnt,1993;33:556
[10]Wang L T,Peng S H,Zhang Q Y,Li Z B.Steel Res Int, 2006;77:25
[11]Zhao L G,Liu K.J Res Iron Steel,2002:14(6):19 (赵连刚,刘坤.钢铁研究学报,2002;14(6):19)
[12]Lei H,Wang L,Wu Z,Fan J.ISIJ lnt,2002;42:717
[13]Launder B E,Spalding D B.Comput Meth Appl Meeh En9,1974;15:269
[14]O′Rourke P J.PhD Thesis,Princeton University,New.Jer- sey,USA,1981
[15]Taniguchi S,Kikuchi A,Ise T,Shoji N.ISIJ Int.1996;36 (Suppl.):117
[16]Thomas B G,Mika L J,Najjar F M.Metall Trans,1990; 21B:387
[17]Thomas B G,Huang X,Sussman R C.Metall Mater Trans,1994;25B:527
[18]Bouris D,Bergeles G.Metall Mater Trans,1998;29B:641
[19]Lei H,Jin Y,Zhu M,He J.J Mater Sei Technol,2002;18: 403
[20]Lu L F,Lu S P,Zhou S Q,Ren Q,Li D,Kang R M,Wu W D.J Chongqing Univ,2006;29(2):72 (刘林飞,刘守平,周土祺,任勤,李丁,康人木,吴文东.重庆大学学报,2006;29(2):72)
[21]Yin H,Shibata H,Emi T,Suzuki M.ISIJ lnt,1997;37: 936
[22]Kimura S,Nabeshima Y,Nakajima K,Mizoguchi S.Metall Mater Trans,2000;31B:1013
[1] 陈润农, 李昭东, 曹燕光, 张启富, 李晓刚. 9%Cr合金钢在含Cl环境中的初期腐蚀行为及局部腐蚀起源[J]. 金属学报, 2023, 59(7): 926-938.
[2] 杨杜, 白琴, 胡悦, 张勇, 李志军, 蒋力, 夏爽, 周邦新. GH3535合金中晶界特征对碲致脆性开裂影响的分形分析[J]. 金属学报, 2023, 59(2): 248-256.
[3] 张月鑫, 王举金, 杨文, 张立峰. 冷却速率对管线钢中非金属夹杂物成分演变的影响[J]. 金属学报, 2023, 59(12): 1603-1612.
[4] 孙阳庭, 李一唯, 吴文博, 蒋益明, 李劲. CaMg掺杂下夹杂物对C70S6非调质钢点蚀行为的影响[J]. 金属学报, 2022, 58(7): 895-904.
[5] 刘洁, 徐乐, 史超, 杨少朋, 何肖飞, 王毛球, 时捷. 稀土Ce对非调质钢中硫化物特征及微观组织的影响[J]. 金属学报, 2022, 58(3): 365-374.
[6] 朱苗勇, 邓志银. 钢精炼过程非金属夹杂物演变与控制[J]. 金属学报, 2022, 58(1): 28-44.
[7] 曹江海, 侯自兵, 郭中傲, 郭东伟, 唐萍. 过热度对轴承钢凝固组织整体形貌特征及渗透率的影响[J]. 金属学报, 2021, 57(5): 586-594.
[8] 唐海燕, 刘锦文, 王凯民, 肖红, 李爱武, 张家泉. 连铸中间包加热技术及其冶金功能研究进展[J]. 金属学报, 2021, 57(10): 1229-1245.
[9] 周红伟, 白凤梅, 杨磊, 陈艳, 方俊飞, 张立强, 衣海龙, 何宜柱. 1100 MPa级高强钢的低周疲劳行为[J]. 金属学报, 2020, 56(7): 937-948.
[10] 孙飞龙, 耿克, 俞峰, 罗海文. 超洁净轴承钢中夹杂物与滚动接触疲劳寿命的关系[J]. 金属学报, 2020, 56(5): 693-703.
[11] 张新房, 闫龙格. 脉冲电流调控金属熔体中的非金属夹杂物[J]. 金属学报, 2020, 56(3): 257-277.
[12] 冯业飞,周晓明,邹金文,王超渊,田高峰,宋晓俊,曾维虎. 粉末高温合金中SiO2夹杂物与基体的界面反应机理及对其变形行为的影响[J]. 金属学报, 2019, 55(11): 1437-1447.
[13] 黄宇, 成国光, 谢有. 稀土Ce对钎具钢中夹杂物的改质机理研究[J]. 金属学报, 2018, 54(9): 1253-1261.
[14] 马歌, 左秀荣, 洪良, 姬颖伦, 董俊媛, 王慧慧. 深海用X70管线钢焊接接头腐蚀行为研究[J]. 金属学报, 2018, 54(4): 527-536.
[15] 侯自兵,曹江海,常毅,王伟,陈晗. 基于分形维数的模具钢电渣重熔铸坯碳偏析形貌特征研究[J]. 金属学报, 2017, 53(7): 769-777.