Please wait a minute...
金属学报  1988, Vol. 24 Issue (4): 270-275    
  论文 本期目录 | 过刊浏览 |
K17镍基铸造高温合金环境损伤的研究
郭建亭;黄荣芳;杨洪才;马军
副研究员;沈阳文化路中国科学院金属研究所;中国科学院金属研究所;东北工学院;东北工学院
ENVIRONMENTAL DAMAGE OF CAST Ni-BASE SUPERALLOY K17
GUO Jianting;HUANG Rongfang;YANG Hongcai;MA Jun Institute of Metal Research; Academai Sinica; Shenyang; Northeast University of Technology Shenyang
引用本文:

郭建亭;黄荣芳;杨洪才;马军. K17镍基铸造高温合金环境损伤的研究[J]. 金属学报, 1988, 24(4): 270-275.
, , , . ENVIRONMENTAL DAMAGE OF CAST Ni-BASE SUPERALLOY K17[J]. Acta Metall Sin, 1988, 24(4): 270-275.

全文: PDF(1398 KB)  
摘要: 本文研究了镍基铸造高温合金K17在真空、空气和热腐蚀环境中热暴露前后持久性能和高温拉伸性能的变化.结果表明,真空中热暴露对K17合金的持久寿命没有影响,但降低高温瞬时拉伸强度,提高持久塑性和高温瞬时拉伸塑性;空气和热腐蚀环境中热暴露明显降低持久性能和高温瞬时拉伸性能,其中尤以热腐蚀环境最严重,空气环境暴露造成晶界氧化并贫Cr,热腐蚀环境暴露引起晶界严重硫化,晶界两侧贫Cr富S,因而弱化晶界,降低性能.
关键词 K17合金环境损伤热腐蚀晶界氧化贫铬    
Abstract:Rupture and tensile properties of K17 before and after thermal expo-sure in vacuum, air and hot corrosion environments have been investigated. Theresults show that vacuum exposure essentially does not affect the rupture lives, butit results in the decrease of high temperature tensile strength and increases of rup-ture and high temperature tensile ductilities; air or hot corrosion environmental ex-posure make the alloy degradation: severely reduce the rupture and high temperaturetensile properties, hot corrosion environmental exposure being more harmful. Theformer causes grain boundary oxidation and depletion of Cr, and the later makesthe sulphurization at grain boundaries. That results in the concentration of S anddepletion of Cr at grain boundaries and, consequently, weakens the grain bounda-ries.
Key wordsK17 alloy    environmental demage    hot corrosion    grain boundary oxidation    depletion of Cr
收稿日期: 1988-04-18     
1 郭建亭.见:师昌绪主编,材料科学进展.北京:科学出版社,1986:267-273
2 黄荣芳,唐亚俊,李英敖,郭建亭.金属学报,1984;20:B288-295
3 郭建亭,朱耀霄,师昌绪.金属学报,1974;10:74-98
4 郭建亭.能源材料通讯,1983;(1) :34-40
5 Guo Jianting (郭建亭), Ranucci D, Picco E, Stroccin P M. High Temperature Alloys for Gas Turbines, London: Reidel D Publishing Company, 1982: 805-819
[1] 赵晓峰, 李玲, 张晗, 陆杰. 热障涂层高熵合金粘结层材料研究进展[J]. 金属学报, 2022, 58(4): 503-512.
[2] 王迪, 王栋, 谢光, 王莉, 董加胜, 陈立佳. Pt-Al涂层对一种镍基单晶高温合金抗热腐蚀行为的影响[J]. 金属学报, 2021, 57(6): 780-790.
[3] 廖依敏, 丰敏, 陈明辉, 耿哲, 刘阳, 王福会, 朱圣龙. TiAl合金表面搪瓷基复合涂层与多弧离子镀NiCrAlY涂层的抗热腐蚀行为对比研究[J]. 金属学报, 2019, 55(2): 229-237.
[4] 黄太文,卢晶,许瑶,王栋,张健,张家晨,张军,刘林. ReTa对抗热腐蚀单晶高温合金900 ℃长期时效组织稳定性的影响[J]. 金属学报, 2019, 55(11): 1427-1436.
[5] 高博, 王磊, 宋秀, 刘杨, 杨舒宇, 千叶晶彦. 预氧化对Co-Al-W基高温合金高温氧化和热腐蚀行为的影响[J]. 金属学报, 2019, 55(10): 1273-1281.
[6] 蒋成洋, 阳颖飞, 张正义, 鲍泽斌, 朱圣龙, 王福会. 一种Zr改性双相PtAl2+(Ni, Pt)Al涂层的制备及热腐蚀行为研究[J]. 金属学报, 2018, 54(4): 581-590.
[7] 彭新, 姜肃猛, 孙旭东, 宫骏, 孙超. 梯度NiCoCrAlYSi涂层的循环氧化及热腐蚀行为*[J]. 金属学报, 2016, 52(5): 625-631.
[8] 景艳红, 刘恩泽, 郑志, 佟健, 宁礼奎, 何平. 钎料合金BCo46的抗热腐蚀性能*[J]. 金属学报, 2014, 50(1): 79-87.
[9] 肖旋,赵海强,王常帅,郭永安,郭建亭,周兰章. B和P对GH984合金组织和力学性能的影响[J]. 金属学报, 2013, 29(4): 421-427.
[10] 卢旭阳, 于大千, 姜肃猛, 刘山川,宫骏, 孙超. (NiCoCrAlYSiB+AlSiY)复合涂层热腐蚀行为的研究[J]. 金属学报, 2012, 48(4): 461-468.
[11] 张红 齐慧滨 杜翠薇 李晓刚. 湿热环境中碱性泥浆附着下镀锌钢板的腐蚀行为[J]. 金属学报, 2009, 45(3): 338-344.
[12] 吕家欣 郑 磊 张麦仓 董建新. 镍基合金FGH95在熔融NaCl--Na2SO4中的腐蚀行为[J]. 金属学报, 2009, 45(2): 204-210.
[13] 宁礼奎 郑志 谭毅 刘恩泽 佟健 于永泗 王华. 一种新型定向凝固镍基高温合金抗热腐蚀性能的研究[J]. 金属学报, 2009, 45(2): 161-166.
[14] 闫伟 孙凤久 王清江 刘建荣 陈志勇 李少强. Ti60合金表面电弧离子镀Ti-Al-Cr(Si, Y) 防护涂层的热腐蚀行为[J]. 金属学报, 2009, 45(10): 1171-1178.
[15] 刘恩泽 孙树臣 涂赣峰 郑 志 宁礼奎 张凌峰. 一种新型高强抗热腐蚀DZ68镍基高温合金的研究[J]. 金属学报, 2009, 45(10): 1217-1224.