Acta Metall Sin  1996, Vol. 32 Issue (4): 337-350    DOI:

Current Issue | Archive | Adv Search |

RESEARCH ASPECTS OF TRANSFORMATION AND APPLICATION OF BAINITE AND MARTENSITE

FANG Hongsheng; YANG Zhigang; WANG Jiajun; ZHENG Yankang(Tsinghua University; Beijing 100084)(Manuscript received 1995-11-10)

FANG Hongsheng; YANG Zhigang; WANG Jiajun; ZHENG Yankang(Tsinghua University; Beijing 100084)(Manuscript received 1995-11-10). RESEARCH ASPECTS OF TRANSFORMATION AND APPLICATION OF BAINITE AND MARTENSITE. Acta Metall Sin, 1996, 32(4): 337-350.

Abstract References Related Articles Recommended Metrics Download:  PDF(1084KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The key and most recent research results on bainite transformation obtained by Phase Transformation and Multi-Phase New Materials Research Group of Tsinghua University have been generalized in this paper,including the objective and popular existence of three-dimensional super and nanometer scale ledges, the mobility of ledge risers, internal ultra fine structure of bainitic plates, the characteristic and nature of bainitic surface reliefs, the source and formation models of bainitic carbide, STM and AFM studies of martensitic surface reliefs, etc. The sympathetic nucleation and ledgewise growth (SNLG) formation mechanism of bainite has been further described, and applied to interpret the multi-layer complicated substructure. Also the industrial application of air-cooled bainitic/martensitic duplex phase steel has been related.Correspondent: WANG Jiajun, associate professor, (Department of Materials Science and Engineering,Tsinghua University, Beijing 100084) Key words:  bainite      carbide      STM      AFM      surface relief      ledge      SNLG mechanism      ultra fine structure      Received:  18 April 1996      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1996/V32/I4/337 1FangHS,LiC．MetallMaterTrans,1994;25A:26152JinQ,FangHS．MetallTrans,1990;21A:26373LiC,FangHS,WangJ,ZhengY．MaterLett,1995;22:224金强,方鸿生,曹建军,郑燕康,陈秀云.金属学报,1990;26:A3915李春明,方鸿生,郑燕康,王家军,杨志刚.科学通报,1995;40:6726方鸿生,李春明,王家军.金属学报,1993;29:A3837李春明,方鸿生,科学通报,1994;39:9808王家军,方鸿生,杨志刚,李春明.金属热处理学报,1994;15:139FangHS,WangJ,LiC．In:ProceedingofConferenceontheRolesofShear&DiffusionintheFor-mationofPlate-ShapedTransformationProducts,Hawaii,USA,TMSandASM,1992:1510WangJ,FangHS,ZhengY．MaterCharact,1994;33:16911方鸿生,王家军,杨志刚．自然科学进展,1993;3:52512YanJ,FangHS,WangJ．JVacSciTechnol,1994;12:179313FangHS,YangZ,WangJ．In:ProcMicrostructuresLCS’94,Japan,1994:4314方鸿生,王家军.材料研究学报,1994;8:12015方鸿生,王家军,郑燕康,杨志刚．材料科学中的扫描隧道显微分析.北京:科学出版社,1993:1116严隽珏,方鸿生,王家军,科学通报,1994;39:11417WangJiajun,YangZhigang,LiChunming,FangHongsheng．ActaMetallSin(EngLett),1995;8(1):1918SpanosG,FangHS,AaronsonHI．MetallTrans,1990;21A:138119王家军,杨志刚,方鸿生,郑燕康,邓旭蕊.清华大学学报,1996;36(6):待发表20王家军,方鸿生,郑燕康.兵器材料科学与工程,1993;16(4):321王家军,杨志刚,胡达新,方鸿生．理化检验(物理分册),1994;30(6):922方鸿生,李春明, [1] LIU Jihao, ZHOU Jian, WU Huibin, MA Dangshen, XU Huixia, MA Zhijun. Segregation and Solidification Mechanism in Spray-Formed M3 High-Speed Steel[J]. 金属学报, 2023, 59(5): 599-610. [2] ZHAO Yafeng, LIU Sujie, CHEN Yun, MA Hui, MA Guangcai, GUO Yi. Critical Inclusion Size and Void Growth in Dual-Phase Ferrite-Bainite Steel During Ductile Fracture[J]. 金属学报, 2023, 59(5): 611-622. [3] LI Shanshan, CHEN Yun, GONG Tongzhao, CHEN Xingqiu, FU Paixian, LI Dianzhong. Effect of Cooling Rate on the Precipitation Mechanism of Primary Carbide During Solidification in High Carbon-Chromium Bearing Steel[J]. 金属学报, 2022, 58(8): 1024-1034. [4] SUN Baode, WANG Jun, KANG Maodong, WANG Donghong, DONG Anping, WANG Fei, GAO Haiyan, WANG Guoxiang, DU Dafan. Investment Casting Technology and Development Trend of Superalloy Ultra Limit Components[J]. 金属学报, 2022, 58(4): 412-427. [5] CHEN Huabin, CHEN Shanben. Key Information Perception and Control Strategy of Intellignet Welding Under Complex Scene[J]. 金属学报, 2022, 58(4): 541-550. [6] ZHU Bin, YANG Lan, LIU Yong, ZHANG Yisheng. Micromechanical Properties of Duplex Microstructure of Martensite/Bainite in Hot Stamping via the Reverse Algorithms in Instrumented Sharp Indentation[J]. 金属学报, 2022, 58(2): 155-164. [7] ZHU Dongming, HE Jiangli, SHI Genhao, WANG Qingfeng. Effect of Welding Heat Input on Microstructure and Impact Toughness of the Simulated CGHAZ in Q500qE Steel[J]. 金属学报, 2022, 58(12): 1581-1588. [8] JIANG Zhonghua, DU Junyi, WANG Pei, ZHENG Jianneng, LI Dianzhong, LI Yiyi. Mechanism of Improving the Impact Toughness of SA508-3 Steel Used for Nuclear Power by Pre-Transformation of M-A Islands[J]. 金属学报, 2021, 57(7): 891-902. [9] HE Shuwen, WANG Minghua, BAI Qin, XIA Shuang, ZHOU Bangxin. Effect of TaC Content on Microstructure and Mechanical Properties of WC-TiC-TaC-Co Cemented Carbide[J]. 金属学报, 2020, 56(7): 1015-1024. [10] WANG Xi,LIU Renci,CAO Ruxin,JIA Qing,CUI Yuyou,YANG Rui. Effect of Cooling Rate on Boride and Room Temperature Tensile Properties of β-Solidifying γ-TiAl Alloys[J]. 金属学报, 2020, 56(2): 203-211. [11] YANG Ke,LIANG Ye,YAN Wei,SHAN Yiyin. Preferential Distribution of Boron and its Effect on Microstructure and Mechanical Properties of (9~12)%Cr Martensitic Heat Resistant Steels[J]. 金属学报, 2020, 56(1): 53-65. [12] LI Jiarong,XIE Hongji,HAN Mei,LIU Shizhong. High Cycle Fatigue Behavior of Second Generation Single Crystal Superalloy[J]. 金属学报, 2019, 55(9): 1195-1203. [13] Futao DONG,Fei XUE,Yaqiang TIAN,Liansheng CHEN,Linxiu DU,Xianghua LIU. Effect of Annealing Temperature on Microstructure, Properties and Hydrogen Embrittlement of TWIP Steel[J]. 金属学报, 2019, 55(6): 792-800. [14] HUANG Yu, CHENG Guoguang, LI Shijian, DAI Weixing. Precipitation Mechanism and Thermal Stability of Primary Carbide in Ce Microalloyed H13 Steel[J]. 金属学报, 2019, 55(12): 1487-1494. [15] Shixin XU, Wei YU, Shujia LI, Kun WANG, Qisong SUN. Effects of Pre-Deformation Temperature on Nanobainite Transformation Kinetics and Microstructure[J]. 金属学报, 2018, 54(8): 1113-1121. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed