Please wait a minute...
Acta Metall Sin  1998, Vol. 34 Issue (12): 1284-1288    DOI:
Current Issue | Archive | Adv Search |
MICROSTRUCTURAL CHARACTERISTICS AND WEAR PROPERLIES OF IN SITU FORMED TiC PARTICLE REINFORCED COATINGS BY LASER CLADDING
WU Xiaolei; CHEN Guangnan(Institute of Mechanics; The Chinese Academy of Sciences; Beijing 100080)Correspondent: WU Xiaolei; postdoctor Tel: 6B547527; Fax: 6B561284;E-mail: xlwu@ccs5.imech. ac. cnManuscript received 1998-03-05
Cite this article: 

WU Xiaolei; CHEN Guangnan(Institute of Mechanics; The Chinese Academy of Sciences; Beijing 100080)Correspondent: WU Xiaolei; postdoctor Tel: 6B547527; Fax: 6B561284;E-mail: xlwu@ccs5.imech. ac. cnManuscript received 1998-03-05. MICROSTRUCTURAL CHARACTERISTICS AND WEAR PROPERLIES OF IN SITU FORMED TiC PARTICLE REINFORCED COATINGS BY LASER CLADDING. Acta Metall Sin, 1998, 34(12): 1284-1288.

Download:  PDF(2963KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  A new method was realized to produce a Ni-alloy composite coating reinforcedby in situ reacted and gradiently distributed TiC particles (TiCp) by one step laser cladding.TiCp was introduced by an in situ reaction of titanium and graphite during laser clad process.It was observed that the disperse TiCp with size of sub-micrometer formed in the layer. And,TiC. possessed density--gradient distribution and a maximum volume fraction of 38% at thelayer surface. Furthermore, the in situ generated TiCp/matrir interfaCes is found to keep cleanand free from deleterious surface reactions. The microhardness revealed a gradient variationwith the layer depth,and the highest value was 1250 HV0.2. The wear properties of the layeris significantly enhanced due to a large amount of TiCp and strong phase interface combinationwithout evidently increasing the friction coefficient.
Key words:  laser cladding      in situ formation      TiC particle      composite material     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I12/1284

1 Cerri W,Martinella R.Mor G P.Surf Coat Technol.1991;49:40
2Hu C.Barnard L.Mridha S,Baker T N.J Mater Process Technol.1996;58:87
3 Kooper K P.J Vac Sci Technol,1986;4;2856
4Abbas G,West D R F.Wear.1991:143:353
5Abbas G.West D R F.Proc SPIE.1989;1132:237
6Westwood A R C.Metall Trans ,1988;19A:749
7Langan T J.Pickens J R.Scr Metall Mater.1991;25:2689
8Mitra R,Chiou W A.Weertman J R.Scr Metall Mater.1991;25;2829
9Rohatgi P K,Asthana R.J Met;1991;5:35
10Dhindaw B K,Stefanescu D M,Singh A K.Metall Trans,1988;19A:2829
11Lei T C.Ouyang J H.Pei Y T,Xhou Y.Mater Sci Technol.1995.11:520
12Matthews S T.Applications Of Lasers in Materials Processing.Metal Park,OH:ASM.1983:138
13 Boas M.Bamberger M.Reves G.Surf Coat Technol.1990;42:175U
[1] FENG Kai, GUO Yanbing, FENG Yulei, YAO Chengwu, ZHU Yanyan, ZHANG Qunli, LI Zhuguo. Microstructure Controlling and Properties of Laser Cladded High Strength and High Toughness Fe-Based Coatings[J]. 金属学报, 2022, 58(4): 513-528.
[2] ZHANG Lei, SHI Tao, HUANG Huogen, ZHANG Pei, ZHANG Pengguo, WU Min, FA Tao. Phase Separation and Solidification Sequence of Uranium-Based Amorphous Composites[J]. 金属学报, 2022, 58(2): 225-230.
[3] ZHAO Wanxin, ZHOU Zheng, HUANG Jie, YANG Yange, DU Kaiping, HE Dingyong. Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding[J]. 金属学报, 2021, 57(10): 1291-1298.
[4] TONG Wenhui, ZHANG Xinyuan, LI Weixuan, LIU Yukun, LI Yan, GUO Xuming. Effect of Laser Process Parameters on the Microstructure and Properties of TiC Reinforced Co-Based Alloy Laser Cladding Layer[J]. 金属学报, 2020, 56(9): 1265-1274.
[5] GAI Yibing, TANG Fawei, HOU Chao, LU Hao, SONG Xiaoyan. First-Principles Calculation on the Influence of Alloying Elements on Interfacial Features of W-Cu System[J]. 金属学报, 2020, 56(7): 1036-1046.
[6] ZHANG Yu, LOU Liyan, XU Qinglong, LI Yan, LI Changjiu, LI Chengxin. Microstructure and Wear Resistance of Ni-Based WC Coating by Ultra-High Speed Laser Cladding[J]. 金属学报, 2020, 56(11): 1530-1540.
[7] Li FAN, Haiyan CHEN, Yaohua DONG, Xueying LI, Lihua DONG, Yansheng YIN. Corrosion Behavior of Fe-Based Laser Cladding Coating in Hydrochloric Acid Solutions[J]. 金属学报, 2018, 54(7): 1019-1030.
[8] Yinghua LIN, Ying YUAN, Liang WANG, Yong HU, Qunli ZHANG, Jianhua YAO. Effect of Electric-Magnetic Compound Field on the Microstructure and Crack in Solidified Ni60 Alloy[J]. 金属学报, 2018, 54(10): 1442-1450.
[9] Wenhui TONG,Zilong ZHAO,Xinyuan ZHANG,Jie WANG,Xuming GUO,Xinhua DUAN,Yu LIU. Microstructure and Properties of TiC/Co-Based Alloyby Laser Cladding on the Surface of NodularGraphite Cast Iron[J]. 金属学报, 2017, 53(4): 472-478.
[10] Bin LIU,Kai GONG,Yanxin QIAO,Shiyun DONG. EVALUATION OF INFLUENCE OF PRESET CRACK BURIAL DEPTH ON STRESS OF LASER CLADDING COATING WITH METAL MAGNETIC MEMORY[J]. 金属学报, 2016, 52(2): 241-248.
[11] Binshi XU,Jinxiang FANG,Shiyun DONG,Xiaoting LIU,Shixing YAN,Chaoqun SONG,Dan XIA. HEAT-AFFECTED ZONE MICROSTRUCTURE EVOLU- TION AND ITS EFFECTS ON MECHANICAL PROPERTIES FOR LASER CLADDING FV520B STAINLESS STEEL[J]. 金属学报, 2016, 52(1): 1-9.
[12] LIN Yinghua, LEI Yongping, FU Hanguang, LIN Jian. LASER IN SITU SYNTHESIZED TITANIUM DIBORIDE AND NITINOL REINFORCE TITANIUM MATRIX COMPOSITE COATINGS[J]. 金属学报, 2014, 50(12): 1513-1519.
[13] LIN Yinghua, LEI Yongping, FU Hanguang, LIN Jian. EFFECT OF Ni ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TiB2/TiB TITANIUM MATRIX COMPOSITE COATINGS[J]. 金属学报, 2014, 50(12): 1520-1528.
[14] WANG Chuanqi, LIU Hongxi, ZHOU Rong, JIANG Yehua, ZHANG Xiaowei. CHARACTERISTIC BEHAVIORS OF PARTICLE PHASES IN NiCrBSi-TiC COMPOSITE COATING BY LASER CLADDING ASSISTED BY MECHANICAL VIBRATION[J]. 金属学报, 2013, 49(2): 221-228.
[15] XU Hengdong ZHAO Haiyan S¨orn Ocylok Igor Kelbassa. STUDY ON CRACKS IN LASER DIRECT–CLADDED TITANIUM LAYER ON LOW CARBON STEEL[J]. 金属学报, 2012, 48(2): 142-147.
No Suggested Reading articles found!