Acta Metall Sin  1998, Vol. 34 Issue (2): 146-150    DOI:

Current Issue | Archive | Adv Search |

ANALXSIS OF FATIGUE FRACTURE WITH CYCLIC OVERLOADING FOR A537 STEEL IN 3.5%NaCl SOLUTION AT AN APPLIED CATHODIC POTENTIAL

WEI Xuejun;LI Jin;LIU Su'e;KE Wei (State Key Laboratory of Corrosion and Protection; Institute of Corrosion and Protection of Metals; The Chinese Academy of Sciences; Shenyang 110015)

WEI Xuejun;LI Jin;LIU Su'e;KE Wei (State Key Laboratory of Corrosion and Protection; Institute of Corrosion and Protection of Metals; The Chinese Academy of Sciences; Shenyang 110015). ANALXSIS OF FATIGUE FRACTURE WITH CYCLIC OVERLOADING FOR A537 STEEL IN 3.5%NaCl SOLUTION AT AN APPLIED CATHODIC POTENTIAL. Acta Metall Sin, 1998, 34(2): 146-150.

Abstract References Related Articles Recommended Metrics Download:  PDF(2275KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The fatigue crack propagation rate has been measured for A537 steel in 3.5%NaCl solution at an applied cathodic potential of -1400mV(SCE) under different cyclic overload occurrence ratio(OCR). The fracture surface characteristics have been analyzed by SEM. When OCR=10-l and 10-2, the crack growth was accelerated and some brittle characteristics such as cleavage and intergranular cracking were observed on the fracture surface. However, for OCR=10-3,2×10-4 and 10-4, the crack growth was retarded, and the pearlite morphology appeared on the fracture. The difference of cracking models between ferrite and pearlite in A537 steel could be the enrichment of hydrogen atoms at the interphase of ferrite and cementite. Key words:  fracture surface      overload      corrosion fatigue      Received:  18 February 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I2/146 1Beachem C D. Met Trans, 1972; 3A: 437 ZBanerji S K.Met Trans,1978;9A:237 3王俭秋.中国科学院金属腐蚀与防护研究所博士论文,1995 (Wang J Q. Doctor Thesis, Institute of Corrosion and Protection of Metals, 1995) 4魏学军,李劲,柯伟.材料研究学报,1996;6:608 (Wei X J, Li J, Ke W. Chn J Mater Res,1996 6:608) 5李晋,任金城.结构钢金相图谱,北京:机械工业出版社,1985 (Li J, Ren J C. Metallograph Diagrams for Structural Steels,Beijing Mechanical Industry Press, 1995)a [1] TAN Jibo, WANG Xiang, WU Xinqiang, HAN En-Hou. Corrosion Fatigue Behavior of 316LN Stainless Steel Hollow Specimen in High-Temperature Pressurized Water[J]. 金属学报, 2021, 57(3): 309-316. [2] WU Xinqiang, TAN Jibo, XU Song, HAN En-Hou, KE Wei. CORROSION FATIGUE MECHANISM OF NUCLEAR-GRADE LOW ALLOY STEEL IN HIGH TEMPERATURE PRESSURIZED WATER AND ITS ENVIRONMENTAL FATIGUE DESIGN MODEL[J]. 金属学报, 2015, 51(3): 298-306. [3] Xiaoguang WANG,Jiarong LI,Jian YU,Shizhong LIU,Zhenxue SHI,Xiaodai YUE. TENSILE ANISOTROPY OF SINGLE CRYSTAL SUPERALLOY DD9[J]. 金属学报, 2015, 51(10): 1253-1260. [4] YAN Ying, LU Meng, LI Xiaowu. EFFECTS OF PRE-FATIGUE DEFORMATION ON THE  UNIAXIAL TENSILE BEHAVIOR OF COARSEGRAINED PURE Al[J]. 金属学报, 2013, 49(6): 658-666. [5] HAN En--Hou. RESEARCH TRENDS ON MICRO AND NANO--SCALE MATERIALS DEGRADATION IN NUCLEAR POWER PLANT[J]. 金属学报, 2011, 47(7): 769-776. [6] WU Xinqiang XU Song HAN En-Hou KE Wei. CORROSION FATIGUE OF NUCLEAR--GRADE STAINLESS STEEL IN HIGH TEMPERATURE WATER AND ITS ENVIRONMENTAL FATIGUE DESIGN MODEL[J]. 金属学报, 2011, 47(7): 790-796. [7] . Research Of Flaking And Its Fractography In A Wheel Steel[J]. 金属学报, 2006, 42(3): 273-279 . [8] FANG Bingyan; HAN Enhou; WANG Jianqiu; KE Wei. Influence of strain rate on near-neutral pH environmentally assisted cracking of pipeline steels[J]. 金属学报, 2005, 41(11): 1174-1182 . [9] ZHANG Xiaoqing; SUN Yongqing; ZHANG Zheng. Recognition of Metal Fracture Surface Morphologies Based on the Fuzzy Texture Spectrum[J]. 金属学报, 2004, 40(10): 1018-1022 . [10] YANG Jihong; JIA Weiping; LI Shouxin. Observation Of The Dislocation Structure In [013] Copper Single Crystal During Corrosion Fatigue In Nacl Aqueous Solution[J]. 金属学报, 2004, 40(1): 99-102 . [11] No Author. EFFECT OF OVERLOAD OCCURENCE FREQUENCY ON FATIGUE CRACK GROWTH RATE OF STEEL A537[J]. 金属学报, 1997, 33(6): 583-587. [12] YAN Yunhui; WANG Dejun;HUANG Yuhua; WANG Qinghao; WANG Tongbo (Northeastern University; Shenyang 110006)(Manuscript received 1996-05-20; in revised form 1996-07-04). FOURIER TRANSFORM METHOD FOR ANALYSIS OF FATIGUE FRACTOGRAPHS[J]. 金属学报, 1997, 33(4): 386-390. [13] XIE Jianhui;WU Yinshun; ZHU Rizhang (Universily of Science and Technology Beijing;Beijing 100083). INTERGRANULAR CORROSION BEHAVIOUR OF IMPLANT STAINLESS STEEL DURING CORROSION FATIGUE[J]. 金属学报, 1997, 33(3): 304-308. [14] YAN Yunhui;WANG Dejun(Northeastern University; Shenyang 110006)(Manuscript received 1995-08-21). IMAGE PROCESSING TECHNIQUES IN ANALYSIS OF METAL FRACTURE SURFACE[J]. 金属学报, 1996, 32(5): 552-556. [15] LI Xiaowu; TIAN Jifeng; KANG Yan; WANG Zhongguang(State Key Laboratory for Fatigue and Fracture of Materials; Institute of Metal Research; Chinese Academy of Sciences; Shenyang 110015)(Manuscript received 1994-11-23; in revised form 1995-03-03). QUANTITATIVE ANALYSIS ON SURFACE ROUGHNESS OF FRACTURE[J]. 金属学报, 1995, 31(19): 311-317. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed