|
|
MICROSTRUCTURE CHARACTERISTICS AND CRYSTALLOGRAPHIC ORIENTATION OF TRANSIENT LIQUID PHASE JOINT OF NI-BASE SINGLE CRYSTAL SUPERALLOY |
LI Wen1;2; JIN Tao2; HU Zhuangqi2 |
1.College of Materials Science and Engineering; Shenyang Ligong University
2.Institute of Metal Research; Chinese Academy of Sciences |
|
Cite this article:
LI Wen JIN Tao HU Zhuangqi. MICROSTRUCTURE CHARACTERISTICS AND CRYSTALLOGRAPHIC ORIENTATION OF TRANSIENT LIQUID PHASE JOINT OF NI-BASE SINGLE CRYSTAL SUPERALLOY. Acta Metall Sin, 2008, 44(12): 1474-1478.
|
Abstract The Ni-based single crystal superalloy was bonded by the transient liquid phase (TLP) bonding using Ni-15Cr-3.5B amorphous ribbon as an insert alloy. The microstructure characteristics in the joint during TLP process were evaluated by OM, SEM and TEM. The electron back scattering diffraction (EBSD) method was applied to determine the crystallographic orientation between the bonded interlayer and substrates. The results indicated that the joint consists of a bond, diffusion and base zones, in the meantime M23B6 +γ and MB+γ eutectics formed in the bond center and the fine M3B2 phases occurred in the diffusion zone. The γ' phases both in the bonded interlayer and in the superalloy substrate are almost identical after homogenization treatment. Due to the epitaxial growth of the isothermal solidification fronts from each mating surface, the crystallographic orientation between the bonded interlayer and the bonded substrate has a good match.
|
Received: 29 May 2008
|
|
[1]Yeh M S,Chuang T H.Weld J,1997;76:517 [2]Gale W F,Butts D A.Sci Technol Weld Join,2004;9: 283 [3]Duvall D S,Owczarski W A,Paulonis D F.Weld J,1974; 20:203 [4]Kim D U,Nishimoto K.Met Mater Int,2002;8:403 [5]Tetsuro T,Taka O E.J Mater Sci,1996;31:2461 [6]Nishimoto K,Saida K,Kim D,Asai S,Furukawa Y,Nakao Y.Weld World,1998;41:121 ]7]Tuah-Poku I,Dollar M,Massalski T B.Metall Trans, 1998;19A:675 [8]Wikstrom N P,Ojo O A,Chaturvedi M C.Mater Sci Eng, 2006;A417:299 [9]Li X H,Mao W,Cheng Y Y.In:Wang S Y,Wang L S, eds.,Proceeding of the 8th Welding Conference,Beijing: China Machine Press,1997:318 (李晓红,毛唯,程耀永.见:王守业,王麟书主编,第八次全国焊接会议论文集,北京:机械工业出版社,1997:318) [10]Li W,Jin T,Sun X F,Guo Y,Guan H R,Hu Z Q.Acta Metall Sin,2001;37:1165 (李文,金涛,孙晓峰,郭义,管恒荣,胡壮麒.金属学报,2001;37:1165) [11]Li W,Jin T,Sun X F,Guo Y,Guan H R,Hu Z Q.Scr Mater,2003;48:1283 [12]Liu J D,Jin T,Zhao N R,Wang Z H,Sun X F,Guan H R,Hu Z Q.Sci Technol Weld Join,2007;12:381 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|