Please wait a minute...
Acta Metall Sin  2008, Vol. 44 Issue (2): 188-192     DOI:
Research Articles Current Issue | Archive | Adv Search |
INVESTIGATION OF HYPERFINE STRUCTURE OF LASER CLADDING Fe-Si COATING
DONG Dan-Yang;Changsheng LIU
辽宁省沈阳市东北大学材料与冶金学院
Cite this article: 

DONG Dan-Yang; Changsheng LIU. INVESTIGATION OF HYPERFINE STRUCTURE OF LASER CLADDING Fe-Si COATING. Acta Metall Sin, 2008, 44(2): 188-192 .

Download:  PDF(423KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  Fe-Si coating with high silicon content was prepared by laser cladding method on low silicon steel surface. Microstructure, hyperfine structure and structural transformation at RT of laser cladding coating were investigated by scanning electron microscopy, transmission electron microscopy,Mossbauer spectroscopy and X-ray diffraction. The results show that there forms metallurgical bonding at the interface between Fe-Si coating and substrate and there exist planar, columnar and dendritic microstructures from the interface to the top surface of the coating. In the laser cladding coating, six different atom configurations of Fe atom are observed. The primary phase containing Si atom is corresponding to the α-Fe type phase of disorderd solid solution structure whose relative content is 24.6 %. The isomer shift increases and the hyperfine magnetic field decreases as the number of nearest- neighbour Si atoms increases in the α-Fe type phase.
Key words:  silicon steel      laser cladding      Mossbauer spectra      hyperfine structure      
Received:  17 May 2007     

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2008/V44/I2/188

[1]Haiji H,Okada K,Hiratani T,Abe M,Ninomiya M.J Magn Magn Mater,1996;160:109
[2]Ushigami Y,Mizokami M,Fujikura M,Kubota T,Fujii H, Murakami K.J Magn Magn Mater,2003;254-255:307
[3]Dong D Y,Liu C S,Zhang B,Miao J.Chin J Mater Res, 2007;21:364 (董丹阳,刘常升,张滨,苗隽.材料研究学报,2007;21:364)
[4]Dong D Y,Liu C S,Zhang B,Miao J.J Univ Sci Technol Beijing,2007;14:321
[5]Pelletier J M,Renaud L,Fouquet F.Mater Sci Eng,1991; A134:1283
[6]Yang S,Su Y P,Liu W J,Huang W D,Zhou Y H.Acta Phys Sin,2003;52:81 (杨森,苏云鹏,刘文今,黄卫东,周尧和.物理学报,2003;52:81)
[7]Su Y P,Lin X,Wang M,Xue L,Huang W D.Chin Phys, 2006;15:1631
[8]Song J L,Deng Q L,Hu D J,Chen C Y.Chin J Lasers, 2005;32:1441 (宋建丽,邓琦林,胡德金,陈畅源.中国激光,2005;32:1441)
[9]Zhao Y,Sheng Q,Wang C B,Zhang L M.Powder Metall Technol,2006;24:407 (赵媛,沈强,王传彬,张联盟.粉末冶金技术,2006;24:407)
[10]Li T,Li Y Z,Zhang Y H.J Phys Condens Matter,1997; 9:1381
[11]Li X N,Nie D,Dong C,Ma T C,Jin X,Zhang Z.Acta Phys Sin,2002;51:115 (李晓娜,聂冬,董闯,马腾才,金星,张泽.物理学报,2002;51:115)
[12]Yuan X G,Xu D M,Zhang W D,Li Q C.Acta Metall Sin,1996;32:1034 (袁晓光,徐达鸣,张卫方,李庆春.金属学报,1996;32:1034)
[13]Chen S Y,Liu C S,Fu G Q,Zhang J L,Cai Q K.Chin J Laser,2003;30:1049 (陈岁元,刘常升,付贵勤,张继良,才庆魁.中国激光,2003;30:1049)
[14]Stearns M B.Phys Rev,1963;129:1136
[15]Ma R Z,Xu Y T.The Theory of M(?)ssbauer Spectra.Bei- jing:Science Press,1996:438 (马如璋,徐英庭.穆斯堡尔谱学.北京:科学出版社,1996:438)
[16]Teng G Q,Chao Y S.Chin or Nonferrous Met,2000;10: 27 (滕功清,晁月盛.中国有色金属学报,2000;10:27)
[17]Bai K C,Jiang Z Y,He K Y,Cheng L Z,Zhi J.Acta Metall Sin,1994;30:67 (白魁昌,江自应,何开元,程力智,智靖.金属学报,1994;30:67)
[18]Chao Y S,Zeng F W,Yang Y L,Dong L Q,Chen S Y. Acta Metall Sin,2000;36:235 (晁月盛,曾繁武,杨玉玲,董立秋,陈岁元.金属学报,2000;36:235)
[1] FENG Kai, GUO Yanbing, FENG Yulei, YAO Chengwu, ZHU Yanyan, ZHANG Qunli, LI Zhuguo. Microstructure Controlling and Properties of Laser Cladded High Strength and High Toughness Fe-Based Coatings[J]. 金属学报, 2022, 58(4): 513-528.
[2] JIANG Weining, WU Xiaolong, YANG Ping, GU Xinfu, XIE Qingge. Formation of Dynamic Recrystallization Zone and Characteristics of Shear Texture in Surface Layer of Hot-Rolled Silicon Steel[J]. 金属学报, 2022, 58(12): 1545-1556.
[3] ZHAO Wanxin, ZHOU Zheng, HUANG Jie, YANG Yange, DU Kaiping, HE Dingyong. Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding[J]. 金属学报, 2021, 57(10): 1291-1298.
[4] TONG Wenhui, ZHANG Xinyuan, LI Weixuan, LIU Yukun, LI Yan, GUO Xuming. Effect of Laser Process Parameters on the Microstructure and Properties of TiC Reinforced Co-Based Alloy Laser Cladding Layer[J]. 金属学报, 2020, 56(9): 1265-1274.
[5] XU Zhanyi, SHA Yuhui, ZHANG Fang, ZHANG Huabing, LI Guobao, CHU Shuangjie, ZUO Liang. Orientation Selection Behavior During Secondary Recrystallization in Grain-Oriented Silicon Steel[J]. 金属学报, 2020, 56(8): 1067-1074.
[6] YU Lei,LUO Haiwen. Effect of Partial Recrystallization Annealing on Magnetic Properties and Mechanical Properties of Non-Oriented Silicon Steel[J]. 金属学报, 2020, 56(3): 291-300.
[7] ZHANG Yu, LOU Liyan, XU Qinglong, LI Yan, LI Changjiu, LI Chengxin. Microstructure and Wear Resistance of Ni-Based WC Coating by Ultra-High Speed Laser Cladding[J]. 金属学报, 2020, 56(11): 1530-1540.
[8] Shuangjie CHU,Yongjie YANG,Zhenghua HE,Yuhui SHA,Liang ZUO. Calculation of Magnetostriction Coefficient for Laser-Scribed Grain-Oriented Silicon Steel Based onMagnetic Domain Interaction[J]. 金属学报, 2019, 55(3): 362-368.
[9] Li FAN, Haiyan CHEN, Yaohua DONG, Xueying LI, Lihua DONG, Yansheng YIN. Corrosion Behavior of Fe-Based Laser Cladding Coating in Hydrochloric Acid Solutions[J]. 金属学报, 2018, 54(7): 1019-1030.
[10] Jun HUANG, Haiwen LUO. Influence of Annealing Process on Microstructures, Mechanical and Magnetic Properties of Nb-Containing High-Strength Non-Oriented Silicon Steel[J]. 金属学报, 2018, 54(3): 377-384.
[11] Yinghua LIN, Ying YUAN, Liang WANG, Yong HU, Qunli ZHANG, Jianhua YAO. Effect of Electric-Magnetic Compound Field on the Microstructure and Crack in Solidified Ni60 Alloy[J]. 金属学报, 2018, 54(10): 1442-1450.
[12] Guimin ZENG,Haiwen LUO,Jun LI,Jian GONG,Xianhao LI,Xianhui WANG. Experimental Studies and Numerical Simulation on the Nitriding Process of Grain-Oriented Silicon Steel[J]. 金属学报, 2017, 53(6): 743-750.
[13] Wenhui TONG,Zilong ZHAO,Xinyuan ZHANG,Jie WANG,Xuming GUO,Xinhua DUAN,Yu LIU. Microstructure and Properties of TiC/Co-Based Alloyby Laser Cladding on the Surface of NodularGraphite Cast Iron[J]. 金属学报, 2017, 53(4): 472-478.
[14] Chengxu HE,Fuyao YANG,Guochun YAN,Li MENG,Guang MA,Xin CHEN,Weimin MAO. EFFECT OF NORMALIZING ON TEXTURES OF THIN-GAUGE GRAIN-ORIENTED SILICON STEEL[J]. 金属学报, 2016, 52(9): 1063-1069.
[15] Gang LIU, Chao LI, Ye MA, Ruijun ZHANG, Yongkai LIU, Yuhui SHA. HEAT STABILITY AND SILICONIZING BEHAVIOR OF SURFACE NANOSTRUCTURE OF SILICON STEEL INDUCED BY ASYMMETRIC ROLLING[J]. 金属学报, 2016, 52(3): 307-312.
No Suggested Reading articles found!