Please wait a minute...
Acta Metall Sin  2004, Vol. 40 Issue (10): 1115-1120     DOI:
Research Articles Current Issue | Archive | Adv Search |
Effect of La2O3 on Hardness Distributions of Laser Clad Ferrite--Based
ZHAO Gaomin; WANG Kunlin; LIU Jiajun
Department of Mechanical Engineering; Tsinghua University; Beijing 100084
Cite this article: 

ZHAO Gaomin; WANG Kunlin; LIU Jiajun. Effect of La2O3 on Hardness Distributions of Laser Clad Ferrite--Based. Acta Metall Sin, 2004, 40(10): 1115-1120 .

Download:  PDF(8841KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The morphologies of laser clad ferrite--based alloy coatings with different contents of rare earth (RE) were observed by SEM. The nanohardness and the elastic modulus of the near the surface and overlapping area were tested by nanoindentation. The hardness distribution in the coating was measured by microhardness tester. The experimental results show that the microstructure of the coatings with RE was refined, the spacing of second dendrites was reduced, and spacing the nanohardness and elastic modulus were increased. The average hardness (HV) of the coating with RE is about 500, which is 50 higher than that without RE. The mechanism of the RE effect was discussed.
Key words:  laser cladding      rare earth      elastic modulus      
Received:  13 November 2003     
ZTFLH:  TG156.99  

URL: 

https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y2004/V40/I10/1115

[1] Wang Y; Liu J J. Surf Eng, 1993; 9 (2) : 151
[2] Tsai H L, Tsai P C. J Mater Eng Perfor, 1995; 4: 689
[3] Liu Y C, Liu J Y, Yin Y S. J Chin Rare Earths Soc, 2001; 19: 281(刘英才,刘俊友,尹衍生.中国稀土学报,2001;19:281)
[4] Xu Y, Ji H, Wei Y D. Chin Rare Earth, 2001; 22(1) : 50(许越,纪红,韦永德.稀土,2001;22(1) :50)
[5] Agarwal A, Dahotre N B. Surf Eng, 2001; 17(10) : 66
[6] Hua W S, Wu X F, Lu H, Shen D H. Mater Mech Eng, 2002; 27(3) : 8(华文深,吴杏芳,陆华,沈电洪.机械工程材料,2002;27(3) :8)
[7] Hua W S, Wu X F, Shen D H. Appl Surf Sci, 2002; 189:72
[8] Oliver W C, Pharr G M. J Mater Res, 1992; 7: 1564
[9] Hua W S, Wu X F, Lu H. Acta Metall Sin, 2002; 38: 1109(华文深,吴杏芳,陆华.金属学报,2002;38:1109)
[10] Zhang L Q, Chen G N. Met Heat Treatment, 2002; 27(11) : 10(张来启,陈光南.金属热处理,2002;27(11) :10)
[11] PAN Y J, Xu B F, LI A M. Met Heat Treatment, 2002; 27(8) : 17(潘应君,许伯藩,李安敏.金属热处理,2002;27(8) :17)
[12] Caralho N J M, De Hosson J Th M. Surf Eng, 2001; 17(2) :105
[13] Shan J G, Ding J C, Ren J L. J Chin Weld, 2001; 22(4) :1(单际国,丁建春,任家烈.焊接学报,2001;22(4) :1)
[14] Wang W. J Chin Rare Earths, 1990; 8: 252(王武.稀土学报,1990;8:252)
[15] Shang L J, Yan X M, Li F. J Shenyang Polytechnic Univ, 1995; 17 (2) : 37(尚丽娟,阎秀梅,李峰.沈阳工业大学学报,1995;17(2) :37)
[16] Sun W C, Zhang S R, Hou A Q. Rare Earth Behavior in Aluminum Alloy. Beijing: Weapon Industry Press, 1992: 225(孙伟成,张淑荣,候爱芹.稀土在铝合金中的行为.北京:兵器工业出版社,1992:225)
[17] Yu D H. Chin Sci Bull, 1981; 4: 206(余端璜.科学通报,1981;4:206)
[18] Ji Z S. J Chin Rare Earths Soc, 2000; 18(1) : 27(吉泽升.中国稀土学报,2000;18(1) :27)
[1] WANG Jingyang, SUN Luchao, LUO Yixiu, TIAN Zhilin, REN Xiaomin, ZHANG Jie. Rare Earth Silicate Environmental Barrier Coating Material: High-Entropy Design and Resistance to CMAS Corrosion[J]. 金属学报, 2023, 59(4): 523-536.
[2] YANG Tianye, CUI Li, HE Dingyong, HUANG Hui. Enhancement of Microstructure and Mechanical Property of AlSi10Mg-Er-Zr Alloys Fabricated by Selective Laser Melting[J]. 金属学报, 2022, 58(9): 1108-1117.
[3] LI Min, LI Haoze, WANG Jijie, MA Yingche, LIU Kui. Effect of Ce on the Microstructure, High-Temperature Tensile Properties, and Fracture Mode of Strip Casting Non-Oriented 6.5%Si Electrical Steel[J]. 金属学报, 2022, 58(5): 637-648.
[4] FENG Kai, GUO Yanbing, FENG Yulei, YAO Chengwu, ZHU Yanyan, ZHANG Qunli, LI Zhuguo. Microstructure Controlling and Properties of Laser Cladded High Strength and High Toughness Fe-Based Coatings[J]. 金属学报, 2022, 58(4): 513-528.
[5] LIU Jie, XU Le, SHI Chao, YANG Shaopeng, HE Xiaofei, WANG Maoqiu, SHI Jie. Effect of Rare Earth Ce on Sulfide Characteristics and Microstructure in Non-Quenched and Tempered Steel[J]. 金属学报, 2022, 58(3): 365-374.
[6] LIU Zhongwu, HE Jiayi. Several Issues on the Development of Grain Boundary Diffusion Process for Nd-Fe-B Permanent Magnets[J]. 金属学报, 2021, 57(9): 1155-1170.
[7] ZHAO Wanxin, ZHOU Zheng, HUANG Jie, YANG Yange, DU Kaiping, HE Dingyong. Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding[J]. 金属学报, 2021, 57(10): 1291-1298.
[8] WANG Mingkang, YUAN Junhao, LIU Yufeng, WANG Qing, DONG Chuang, ZHANG Zhongwei. Effect of Ti on β Structural Stability and Mechanical Properties of Zr-Nb Binary Alloys[J]. 金属学报, 2021, 57(1): 95-102.
[9] LU Bin, CHEN Furong, ZHI Jianguo, GENG Ruming. Enhanced Welding Properties of High Strength Steel via Rare Earth Oxide Metallurgy Technology[J]. 金属学报, 2020, 56(9): 1206-1216.
[10] TONG Wenhui, ZHANG Xinyuan, LI Weixuan, LIU Yukun, LI Yan, GUO Xuming. Effect of Laser Process Parameters on the Microstructure and Properties of TiC Reinforced Co-Based Alloy Laser Cladding Layer[J]. 金属学报, 2020, 56(9): 1265-1274.
[11] ZHU Jian, ZHANG Zhihao, XIE Jianxin. Plastic Deformation Behavior and Fracture Mechanism of Rare Earth H13 Steel Based on In Situ TEM Tensile Study[J]. 金属学报, 2020, 56(12): 1592-1604.
[12] ZHANG Yu, LOU Liyan, XU Qinglong, LI Yan, LI Changjiu, LI Chengxin. Microstructure and Wear Resistance of Ni-Based WC Coating by Ultra-High Speed Laser Cladding[J]. 金属学报, 2020, 56(11): 1530-1540.
[13] HUANG Yu, CHENG Guoguang, LI Shijian, DAI Weixing. Precipitation Mechanism and Thermal Stability of Primary Carbide in Ce Microalloyed H13 Steel[J]. 金属学报, 2019, 55(12): 1487-1494.
[14] Yu HUANG, Guoguang CHENG, You XIE. Modification Mechanism of Cerium on the Inclusions in Drill Steel[J]. 金属学报, 2018, 54(9): 1253-1261.
[15] Li FAN, Haiyan CHEN, Yaohua DONG, Xueying LI, Lihua DONG, Yansheng YIN. Corrosion Behavior of Fe-Based Laser Cladding Coating in Hydrochloric Acid Solutions[J]. 金属学报, 2018, 54(7): 1019-1030.
No Suggested Reading articles found!