Influence Of High Temperature Heat Treatment On Microstructure And Microhardness Of (Ds)Nial--Cr(Mo)—Hf Eutectic Alloy

Acta Metall Sin

2004, Vol. 40

Issue (1): 57-61 DOI:

Research Articles

Current Issue | Archive | Adv Search

Influence Of High Temperature Heat Treatment On Microstructure And Microhardness Of (Ds)Nial--Cr(Mo)—Hf Eutectic Alloy

XU Chunmei; GUO Jianting

Institute of Metal Research; The Chinese Academy of Sciences

Cite this article:

XU Chunmei; GUO Jianting. Influence Of High Temperature Heat Treatment On Microstructure And Microhardness Of (Ds)Nial--Cr(Mo)—Hf Eutectic Alloy. Acta Metall Sin, 2004, 40(1): 57-61 .

Download:

PDF(590KB)
Export: BibTeX | EndNote (RIS)

Abstract The influence of high temperature heat treatment on microstructure and microhardness of (DS)NiAl--Cr(Mo)--Hf eutectic alloy fabricated with directional solidification under high temperature gradient was investigated. The results indicate that there is little change in the morphology of NiAl and Cr(Mo) phases after high temperature heat treatment. But the semicontinuous Heusler phase which is originally located on the grain boundaries is partially reduced and fine Heusler particles re--precipitated within NiAl matrix. Furthermore, NiAl precipitates coarsen in the Cr(Mo) phase and dislocation appears in the Cr(Mo) phase. Microhardness of as--fabricated (DS)NiAl--28Cr--5Mo--1Hf alloy is much higher than that of (DS)NiAl--28Cr--6Mo and basically unchanged after heat treatment

Key words: NiAl directionally solidification

Received: 08 March 2003

ZTFLH:	TG113.1
	TG15

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	XU Chunmei
	GUO Jianting

URL:

https://www.ams.org.cn/EN/ OR https://www.ams.org.cn/EN/Y2004/V40/I1/57

[1] Walter J L, Cline H E. Metall Trans, 1970; 1:1221
[2] Cline H E, Waiter J L. Metall Trans, 1970; 1:2907
[3] Heredia F E, He M Y, Lucas G E, Evans A G, Deve H E, Konitzer D. Acta Metall Mater, 1993; 41:505
[4] Johnson D R, Chen X F, Oliver B F, Noebe R D, Whit tenberger J D. Intermetalics, 1995; 3:99
[5] Polvani R S, Tzeng W S, Strutt P R. Metall Trans, 1976; 7A: 33
[6] Bowman R R, Noebe R D, Raj S V, Locci I E. Metall Trans, 1992; 23A: 1493
[7] Chen R S, Guo J T, Zhou J Y. Mater Lett, 2000; 42:80
[8] Cui C Y, GUO J T. Acta Metall Sin, 1999; 35:477(崔传勇,郭建亭.金属学报,1999;35:477)
[9] Qi Y H, Guo J T, Cui C Y, Li G S. Mater Eng, 2001; 7: 15(齐义辉,郭建亭,崔传勇,李谷松.材料工程,2001;7:15)
[10] Yang J M, Jeng S M, Bain K, Amato R A. Acta Mater, 1997; 45:295
[11] Cui C Y, Guo J T, Qi Y H, Ye H Q. Intermetallics, 2002; 10:1001
[12] Cui C Y, Chen Y X, Guo J T, Qi Y H, Ye H Q. Mater Sci Eng, 2002; A325:186
[13] Chen X F, Johnson D R, Noebe R D, Oliver B F. J Mater Res, 1995; 10:1159
[14] Jiang D T, Guo J T. Mater Lett, 1998; 36:33

[1]	LIU Ze, NING Hanwei, LIN Zhangqian, WANG Dongjun. Influence of Spark Plasma Sintering Parameters on the Microstructure and Room-Temperature Mechanical Properties of NiAl-28Cr-5.5Mo-0.5Zr Alloy[J]. 金属学报, 2021, 57(12): 1579-1587.
[2]	Jianxue LIU, Wenjun XI, Neng LI, Shujie LI. Effect of Interfacial Energy on Distribution of Nanoparticle in the Melt During the Preparation of Fe-Based ODS Alloys by Thermite Reaction[J]. 金属学报, 2017, 53(8): 1011-1017.
[3]	Likui NING,Jian TONG,Enze LIU,Zheng TAN,Huisi JI,Zhi ZHENG. Effect of Ru on the Solidification Microstructure of a Ni-Based Single Crystal Superalloy with High Cr Content[J]. 金属学报, 2017, 53(4): 423-432.
[4]	Qin SHEN,Xiaojiao WANG,Anyu ZHAO,Yifeng HE,Xulei FANG,Jiarong MA,Wenqing LIU. EFFECTS OF Mn ON MULTI-PRECIPITATES EVOLUTION OF Cu-RICH AND NiAl PHASE IN STEELS[J]. 金属学报, 2016, 52(5): 513-518.
[5]	Liyuan SHENG,Jianting GUO,Chen LAI,Tingfei XI. EFFECT OF Zr ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl/Cr(Mo) BASE EUTECTIC ALLOY[J]. 金属学报, 2015, 51(7): 828-834.
[6]	WANG Xing, XI Wenjun, CUI Yue, LI Shujie. MICROSTRUCTURE EVOLUTION MECHANISM AND MECHANICAL PROPERTIES OF FeNiCrAl ALLOY REINFORCED BY COHERENT NiAl SYNTHE- SIZED BY THERMITE PROCESS[J]. 金属学报, 2015, 51(4): 483-491.
[7]	YUAN Chao, ZHOU Lanzhang, LI Gusong, GUO Jianting. CHARACTERISTICS OF A NiAl EUTECTIC ALLOY JJ—3 WITH EXCELLENT PROPERTIES[J]. 金属学报, 2013, 49(11): 1347-1355.
[8]	SHENG Liyuan, ZHANG Wei, LAI Chen, GUO Jianting,XI Tingfei, YE Hengqiang. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LAVES PHASE STRENGTHENING NiAl BASE COMPOSITE FABRICATED BY RAPID SOLIDIFICATION[J]. 金属学报, 2013, 49(11): 1318-1324.
[9]	WANG Zhensheng, ZHANG Meng'en, YANG Shuangshuang, GUO Jianting, ZHOU Lanzhang, CHEN Zhigang. MICROSTRUCTURE, MECHANICAL, FRICTION AND WEAR PROPERTIES OF NiAl－2.5Ta－7.5Cr－1B ALLOY[J]. 金属学报, 2013, 49(11): 1325-1332.
[10]	HOU Jieshan, ZHOU Lanzhang, GUO Jianting, YUAN Chao. APPLICATION OF ARTIFICIAL NEURAL NETWORK FOR PREDICTION OF SUPERPLASTIC BEHAVIOUR IN NiAl ALLOYS[J]. 金属学报, 2013, 49(11): 1333-1338.
[11]	XIAO Xuan XIE Yi GUO Jianting. MICROSTRUCTURES AND MECHANICAL PROPERTIES OF DIRECTIONALLY SOLIDIFIED NiAl–Cr(Mo)–Hf(Ho) EUTECTIC ALLOY[J]. 金属学报, 2010, 46(6): 701-707.
[12]	LIANG Yongchun GUO Jianting; SHENG Liyuan; ZHOU Lanzhang. EFFECTS OF RARE EARTH ELEMENT Gd ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl-Cr(Mo)-Hf EUTECTIC ALLOY[J]. 金属学报, 2010, 46(5): 528-532.
[13]	SHENG Liyuan GUO Jianting ZHANG Wei XIE Yi ZHOU Lanzhang YE Hengqiang. EFFECTS OF HIP AND HEAT TREATMENT ON MICROSTRUCTURE AND COMPRESSIVE PROPERTIES OF RAPIDLY SOLIDIFIED NiAl-Cr(Mo)-Hf EUTECTIC ALLOY[J]. 金属学报, 2009, 45(9): 1025-1029.
[14]	HU Jing LIN Dongliang WANG Yan. EBSD ANALYSES OF THE MICROSTRUCTURAL EVOLUTION AND CSL CHARACTERISTIC GRAIN BOUNDARY OF COARSE--GRAINED NiAl ALLOY DURING PLASTIC DEFORMATION[J]. 金属学报, 2009, 45(6): 652-656.
[15]	WANG Zhensheng GUO Jianting ZHOU Lanzhang SHENG Liyuan HU Zhuangqi. HIGH TEMPERATURE WEAR BEHAVIOR OF NiAl--Cr(Mo)--Ho--Hf EUTECTIC ALLOY[J]. 金属学报, 2009, 45(3): 297-301.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed