Acta Metall Sin  1998, Vol. 34 Issue (4): 373-377    DOI:

Current Issue | Archive | Adv Search |

HYDROGEN INDUCING AMORPHIZATION OF Ti-Fe SYSTEM IN MECHANICAL ALLOYING

REN Shan; HONG Lan; ZHANG Jinxiu (Department of Physics; Zhongshan University; Guangzhou 510275)LU Manqi; HU Zhuangqi (State Key Lab of RSA; Institute of Metal Research; Shenyang 110015)

REN Shan; HONG Lan; ZHANG Jinxiu (Department of Physics; Zhongshan University; Guangzhou 510275)LU Manqi; HU Zhuangqi (State Key Lab of RSA; Institute of Metal Research; Shenyang 110015). HYDROGEN INDUCING AMORPHIZATION OF Ti-Fe SYSTEM IN MECHANICAL ALLOYING. Acta Metall Sin, 1998, 34(4): 373-377.

Abstract References Related Articles Recommended Metrics Download:  PDF(428KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The solid reactions and structures of Ti+Fe and Ti+Fe+TiH2 during mechanical alloying were studied by using XRD, DSC etc. The results show that hydrogen can induce amorphization of TiFe in MA. The characteristic temperatures of amorphous TiFe(H) phase, such as structure relaxation and crystallization temperatures, are lower than that of the amorphousTiFe phase synthesized by mechanical alloying. Key words:  hydrogen inducing amorphization      mechanical alloying      hydride      Ti-Fe      Received:  18 April 1998      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.ams.org.cn/EN/     OR     https://www.ams.org.cn/EN/Y1998/V34/I4/373 1 Yeh X L, Samwer K, Johnson W L. Appl Phys Lett, 1983; 42: 242 2 Chung V In, Kim Yong-Gyoo, Lee Jai-Young. Philos Mag, 1991; 63B: 1119 3 Aoki K, Memezawas A, Masumoto T. J Mater Res, 1994; 9: 39 4 Aoki K, Itoh Y, Masumoto T. Scr Metall Mater, 1994; 31: 1271 5 Ivison P K, Cowlam N. Mater Sci Eng, 1991; 134A: 859 6 Barricl M, Batlerzzati L. J Non-Cryst Solid, 1993; 156-158: 527 7 任山, 吕曼祺, 胡壮麒. 功能材料, 1998; 29: 35(Ren Shan, Lh Manqi, Hu Zhuangqi. Funct Mater, 1998; 29: 35) 8 Liang G X, Li Z M, Wang E D. Mater Sci Technol, 1995; 11: 347 9 Scott M G. ln: Bever M B ed, Encycl Mater Sci Eng, Oxford: Pergamon Press, 1986: 2968 10 Buschow K H J. J Phys, 1984; 14: 593 11 Sumiyama K, Hashimoto Y. Trans Jpn Inst Met, 1983; 24: 61 12 Yavari A R. Desre P J. Phys Rev Lett, 1990; 65: 2571 13 Nakajima H, Koiwa M. ISIJ Int, 1991; 31: 757 14 Meng W J, Nieh W W, Johnson W L. J Appl Phys, 1987; 51: 1963 15 Highmore R J, Greer A L. Mater Lett, 1988; 6: 401 [1] Muqin LI, Haitao YAO, Fanghong WEI, Mingda LIU, Zan WANG, Shuhao PENG. The Microstructure and in Vivo and in Vitro Property of Multi-Component Composite Films on the Biomedical Pure Magnesium Surface[J]. 金属学报, 2017, 53(10): 1337-1346. [2] Wei XU,Xin LU,Yanxia DU,Qingyu MENG,Ming LI,Xuanhui QU. Corrosion Resistance of Ti-Fe Binary Alloys Fabricated by Powder Metallurgy[J]. 金属学报, 2017, 53(1): 38-46. [3] Min ZHU, Zhongchen LU, Renzong HU, Liuzhang OUYANG. DIELECTRIC BARRIER DISCHARGE PLASMA ASSISTED BALL MILLING TECHNOLOGY AND ITS APPLICATIONS IN MATERIALS FABRICATION[J]. 金属学报, 2016, 52(10): 1239-1248. [4] HU Na, XUE Lihong, GU Jian, LI Heping, YAN Youwei. OPTIMIZATION OF GRADING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al13Fe4/Al COM- POSITES IN SITU SYNTHESIZED BY MECHANICAL ALLOYING AND SPARK PLASMA SINTERING[J]. 金属学报, 2015, 51(2): 216-222. [5] YANG Xiaodan, JIANG Chunhai, YANG Zhenming, ZHANG Jinsong. PREPARATION AND CATALYTIC PROPERTIES OF SiC FOAM SUPPORTED Co-BASED STRUCTURED CATALYSTS[J]. 金属学报, 2014, 50(6): 762-768. [6] GU Jian, GU Sasa, XUE Lihong, WU Shusen, YAN Youwei. MICROSTRUCTURE EVOLUTION OF Al－Fe ALLOYS PREPARED BY MECHANICAL ALLOYING AND SPARK PLASMA SINTERING[J]. 金属学报, 2013, 29(4): 435-442. [7] WANG Man, ZHOU Zhangjian, YAN Zhigang, YU Pengfei, SUN Hongying. TEM CHARACTERIZATION OF DISPERSOIDS AND MICROSTRUCTURE OF ODS-316 AUSTENITIC STEEL[J]. 金属学报, 2013, 49(2): 153-158. [8] LU Zheng, LU Chenyang, ZHANG Shouhui, XIE Rui, Liu Chunming. PREPARATION AND CHARACTERIZATION OF NANO-STRUCTURED 14Cr-ODS FERRITIC STEEL[J]. 金属学报, 2012, 48(6): 649-653. [9] SUN Chao TAN Jun YING Shihao LI Cong PENG Qian ZHAO Suqiong. PREDICTION OF CRITICAL TEMPERATURE FOR DELAYED HYDRIDE CRACKING IN IRRADIATED N18 ZIRCONIUM ALLOY[J]. 金属学报, 2010, 46(7): 805-809. [10] SUN Chao TAN Jun YING Shihao LI Cong PENG Qian ZHAO Suqiong. STUDY OF THE CRITICAL TEMPERATURES FOR DELAYED HYDRIDE CRACKING IN N18 ZIRCONIUM ALLOY[J]. 金属学报, 2009, 45(5): 541-546. [11] JIAN Xiaoling. Investigations of Electronic Structures and Bond Characteristics of ZrMn2 Alloy and Its Hydride by First Principle[J]. 金属学报, 2006, 42(2): 123-128 . [12] ZHANG Laichang; SHEN Zhiqi; XU Jian. The Role of Sn Substitution for Si And B to Enhance the Amorphization of Mechanically-Milled Ti50Ni22Cu18Al4Si4B2 Alloy[J]. 金属学报, 2004, 40(9): 981-986 . [13] ZHANG Xiaoqiang; XU Jian. Formation of W Particles /La55Al25Cu10Ni5Co5 Glassy Alloy Matrix Composites By Mechanical Milling[J]. 金属学报, 2004, 40(6): 647-. [14] HANG Laichang; SHEN Zhiqi; XU Jian. MECHANICALLY--DRIVEN AMORPHIZATION IN A (Ti, Zr, Hf)--(Cu, Ni, Ag)--Al MULTICOMPONENT ALLOY SYSTEM[J]. 金属学报, 2004, 40(4): 421-428 . [15] CHEN Changqiang; LI Shouxin; LI Guangyi; AI Suhua. Microstructure of Cyclically Deformed Titanium with Low Hydrogen Concentration I.[J]. 金属学报, 2004, 40(3): 235-240 . No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed