|
|
FORMATION OF LAMELLAR FERRITEMARTENSITE DUAL-PHASE STRUCTURE |
YANG Dezhuang;SUN Shuming;CUI Yuexian;LEI Tingquan Harbin Institute of TechnologyDept.of Metals and technology Harbin Institute of Technology |
|
Cite this article:
YANG Dezhuang;SUN Shuming;CUI Yuexian;LEI Tingquan Harbin Institute of TechnologyDept.of Metals and technology Harbin Institute of Technology. FORMATION OF LAMELLAR FERRITEMARTENSITE DUAL-PHASE STRUCTURE. Acta Metall Sin, 1988, 24(3): 161-167.
|
Abstract The formation of the lamellar ferrite-martensite dual-phase structuredeveloped by prequenching and subcritical quenching in 09SiCrMnMoRE steel hasbeen studied. It is shown that during subcritical annealing, austenite pools are pref-erentially nucleated at prior austenite boundaries and martensite packet boundaries,and then austenite lamellae form at lath boundaries accompanied by cementite pre-cipitation and dissolution. The lamellar austenite growth along the lath and themartensite packet boundaries is beneficial to the decrease of both the interface andthe strain energies which are necessary for austenite formation. As a result, thelamellar ferrite-martensite dual-phase structure is developed after quenching.
|
Received: 18 March 1988
|
1 Speich G R. In: Kot R A, Bramfitt B L eds. Fundamentals of Dual-Phase Steels, New York: AIME, 1981: 3 2 沈显璞,碳素双相钢的强度规律及断裂行为的研究,哈尔滨工业大学,博士学仕论文,1985 3 LePera F S. Metallography, 1979; 12: 263 4 Koo J Y, Thomas G. In: Davenport A T ed. Formable HSLA and Dual-Phase Steels, New York: AIME, 1979: 40 5 渡辺征一,邦武立郎.铁钢,1975;61:96 |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|