COMPONENT SELECTION AND TECHNOLOGICAL OPTIMIZATION OF THICK WALL 1Cr13 TUBE USED AS CONTROL POLES IN NUCLEAR POWER STATION DRIVING MACHINES

doi:10.3724/SP.J.1037.2011.00209

Acta Metall Sin

2011, Vol. 47

Issue (9): 1155-1158 DOI: 10.3724/SP.J.1037.2011.00209

论文

Current Issue | Archive | Adv Search

COMPONENT SELECTION AND TECHNOLOGICAL OPTIMIZATION OF THICK WALL 1Cr13 TUBE USED AS CONTROL POLES IN NUCLEAR POWER STATION DRIVING MACHINES

DU Xiangyuan, SU Guoyue

Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016

Cite this article:

DU Xiangyuan SU Guoyue. COMPONENT SELECTION AND TECHNOLOGICAL OPTIMIZATION OF THICK WALL 1Cr13 TUBE USED AS CONTROL POLES IN NUCLEAR POWER STATION DRIVING MACHINES. Acta Metall Sin, 2011, 47(9): 1155-1158.

Download:

PDF(870KB)
Export: BibTeX | EndNote (RIS)

Abstract The control poles for driving machine in the built and building nuclear power station are made of thick wall 1Cr13 tubes which all depend on overseas importation. With the fast development of domestic nuclear power stations and the need with coming export, as one of the key parts of driving machines, the 1Cr13 tubes used as control poles should be finished in our country. By optimizing the contents of C, Ni, Cr, H, O and N etc., and adjusting the technology of cold rolling, the cracking problem of 1Cr13 tube as control poles during machining is avoided and favorable surface quality is also obtained. The mechanical properties of finished tubes reach the technical request after proper heat--treatment.

Key words: steel 1Cr13 tube cold rolling heat-treatment

Received: 06 April 2011

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	DU Xiang-Yuan
	SU Guo-Ti

URL:

https://www.ams.org.cn/EN/10.3724/SP.J.1037.2011.00209 OR https://www.ams.org.cn/EN/Y2011/V47/I9/1155

[1] Lu S Y, Zhang T K, Kang X F, Yang C Q, Wang X. Stainless Steel, Beijing: Atomic Energy Press, 1995: 23

(陆世英, 张廷凯, 康喜范, 杨长强, 王熙. 不锈钢. 北京: 原子能出版社, 1995: 23)

[2] Cui Z Q. Metal and Heat Treatment. Beijing: Mechanical Industry Press, 1988: 285

(崔忠圻. 金属学与热处理. 北京: 机械工业出版社, 1988: 285)

[3] Barid J D. Met Mater, 1971; 4: 1

[4] Bao J. Spec Steel Technol, 2006; 11(2): 20

(鲍进. 特钢技术, 2006; 11(2): 20)

[5] Li H S. Spec Steel Technol, 2006; 12(4): 25

(李海生. 特钢技术, 2006; 12(4): 25)

[6] Zhang Y T. Manual for Heat Treatment Technician. Beijing: Mechanical Industry Press, 2005: 89

(张玉庭. 热处理技师手册. 北京: 机械工业出版社, 2005: 89)

[7] Woodfine B C. J Iron Steel Inst, 1953; 173: 229

[1]	WANG Zhoutou, YUAN Qing, ZHANG Qingxiao, LIU Sheng, XU Guang. Microstructure and Mechanical Properties of a Cold Rolled Gradient Medium-Carbon Martensitic Steel[J]. 金属学报, 2023, 59(6): 821-828.
[2]	YU Shaoxia, WANG Qi, DENG Xiangtao, WANG Zhaodong. Preparation and Size Effect of GH3600 Nickel-Based Superalloy Ultra-Thin Strips[J]. 金属学报, 2023, 59(10): 1365-1375.
[3]	REN Ping, CHEN Xingpin, WANG Cunyu, YU Feng, CAO Wenquan. Effects of Pre-Strain and Two-Step Aging on Microstructure and Mechanical Properties of Fe-30Mn-11Al-1.2C Austenitic Low-Density Steel[J]. 金属学报, 2022, 58(6): 771-780.
[4]	LUO Wenze, HU Long, DENG Dean. Numerical Simulation and Development of Efficient Calculation Method for Residual Stress of SUS316 Saddle Tube-Pipe Joint[J]. 金属学报, 2022, 58(10): 1334-1348.
[5]	BI Sheng, LI Zechen, SUN Haixia, SONG Baoyong, LIU Zhenyu, XIAO Bolv, MA Zongyi. Microstructure and Mechanical Properties of Carbon Nanotubes-Reinforced 7055Al Composites Fabricated by High-Energy Ball Milling and Powder Metallurgy Processing[J]. 金属学报, 2021, 57(1): 71-81.
[6]	Ling LI,Shenglian YAO,Xiaoli ZHAO,Jiajia YANG,Yexi WANG,Luning WANG. Fabrication and Properties of Anodic Oxide Nanotubular Arrays on Zr-17Nb Alloy[J]. 金属学报, 2019, 55(8): 1008-1018.
[7]	Chunbo LAN,Jianeng LIANG,Yuanxia LAO,Dengfeng TAN,Chunyan HUANG,Xianzhong MO,Jinying PANG. Anomalous Thermal Expansion Behavior of Cold-RolledTi-35Nb-2Zr-0.3O Alloy[J]. 金属学报, 2019, 55(6): 701-708.
[8]	Bo LI,Zhonghua ZHANG,Huasong LIU,Ming LUO,Peng LAN,Haiyan TANG,Jiaquan ZHANG. Characteristics and Evolution of the Spot Segregations and Banded Defects in High Strength Corrosion Resistant Tube Steel[J]. 金属学报, 2019, 55(6): 762-772.
[9]	Houlong LIU,Mingyu MA,Lingling LIU,Liangliang WEI,Liqing CHEN. Effect of Hot Band Annealing Processes on Texture and Formability of 19Cr2Mo1W Ferritic Stainless Steel[J]. 金属学报, 2019, 55(5): 566-574.
[10]	Lina WANG, Ping YANG, Kai LI, Feng'e CUI, Weimin MAO. Phase Transformation and Texture Evolution During Cold Rolling and α'-M Reversion in High Manganese TRIP Steel[J]. 金属学报, 2018, 54(12): 1756-1766.
[11]	Zhonghai JI, Lili ZHANG, Daiming TANG, Chang LIU, Huiming CHENG. A Review on the Controlled Growth of Single-Wall Carbon Nanotubes from Metal Catalysts[J]. 金属学报, 2018, 54(11): 1665-1682.
[12]	Yanli LIN, Zhubin HE, Guannan CHU, Yongda YAN. A New Method for Directly Testing the Mechanical Properties of Anisotropic Materials in Bi-Axial Stress State by Tube Bulging Test[J]. 金属学报, 2017, 53(9): 1101-1109.
[13]	Jingsheng BAI,Qiuhong LU,Lei LU. DETWINNING BEHAVIOR INDUCED BY LOCAL SHEAR STRAIN IN NANOTWINNED Cu[J]. 金属学报, 2016, 52(4): 491-496.
[14]	Kunming PAN,Laiqi ZHANG,Shizhong WEI,Jiwen LI,Hao LI,Junpin LIN. STUDY ON THE PREPARATION PROCESS OF T2 ALLOY IN THE Mo-Si-B SYSTEM[J]. 金属学报, 2015, 51(11): 1377-1383.
[15]	MA Guangcai, FU Huameng, WANG Zheng, XU Qingliang, ZHANG Haifeng. STUDY ON FABRICATION AND PROPERTIES OF 304 STAINLESS STEEL CAPILLARY TUBES/Zr_53.5Cu_26.5Ni₅Al₁₂Ag₃ BULK METALLIC GLASS COMPOSITES[J]. 金属学报, 2014, 50(9): 1087-1094.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed