Influence of Pt-Al Coating on Hot Corrosion Resistance Behaviors of a Ni-Based Single-Crystal Superalloy

doi:10.11900/0412.1961.2020.00246

Acta Metall Sin

2021, Vol. 57

Issue (6): 780-790 DOI: 10.11900/0412.1961.2020.00246

Research paper

Current Issue | Archive | Adv Search

Influence of Pt-Al Coating on Hot Corrosion Resistance Behaviors of a Ni-Based Single-Crystal Superalloy

WANG Di¹^,²(

), WANG Dong², XIE Guang², WANG Li², DONG Jiasheng², CHEN Lijia¹

^1.School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China
^2.Shi -Changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China

Cite this article:

WANG Di, WANG Dong, XIE Guang, WANG Li, DONG Jiasheng, CHEN Lijia. Influence of Pt-Al Coating on Hot Corrosion Resistance Behaviors of a Ni-Based Single-Crystal Superalloy. Acta Metall Sin, 2021, 57(6): 780-790.

Download:

HTML

PDF(11233KB)
Export: BibTeX | EndNote (RIS)

Abstract

Pt-Al coating has been widely used in engine rotor blades because of its ability to improve the oxidation and hot corrosion resistance of Ni-based superalloys. However, the effect exerted by Pt on S and other refractory elements, as well as the rupture mechanisms, is under debate. To investigate the influence of Pt-Al coating on the corrosion resistance of single-crystal superalloy at high temperature, the hot corrosion test utilized Na₂SO₄ salt coated on the surface of the Pt-Al coating samples and the uncoated ones were carried out at 900^oC, respectively. Using several techniques, such as XRD, SEM, EDS, and EPMA, the influence of Pt-Al coating on the hot corrosion behaviors of a Ni-based single-crystal superalloy was analyzed. Moreover, the hot corrosion kinetics, hot corrosion products, and microstructure evolution during the process were analyzed. The results reveal that the hot corrosion resistance of the substrate alloy was enhanced by Pt-Al coating. The hot corrosion rate of the Pt-Al coating sample was lower than that of the uncoated one. Thus, it can be inferred that Pt-Al coating exhibited better hot corrosion resistance. Pt prevented the diffusion of S into the β-(Ni, Pt)Al phase. The S atom was present at the oxide-metal interface, which reduced the hot corrosion rate of the substrate alloy. The presence of Pt in the β-(Ni, Pt)Al obstructed the great mass of Ta in the inter diffusion zone, which led to the diffusion of only a small quantity of Ta atoms into the oxide, and reduced the formation of Ta₂O₅. Finally, Pt-Al coating was also found to restrain to some extent the void formation at the oxide-metal interface.

Key words: Pt-Al coating hot corrosion single-crystal superalloy Ni-based alloy

Received: 09 July 2020

ZTFLH:

TG174.31

Fund: National Key Research and Development Program of China(2016YFB0701403);National Science and Technology Major Project(2017-Ⅵ-0019-0091);National Natural Science Foundation of China(51771204)

About author: WANG Di, Tel: (024)23748876, E-mail: diwang@imr.ac.cn

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors
	Di WANG
	Dong WANG
	Guang XIE
	Li WANG
	Jiasheng DONG
	Lijia CHEN

URL:

https://www.ams.org.cn/EN/10.11900/0412.1961.2020.00246 OR https://www.ams.org.cn/EN/Y2021/V57/I6/780

Fig.1 BSE image of cross-sectional microstructure of Pt-Al coating (IDZ—inter diffusion zone)

Fig.2 Macroscopic surfaces of uncoated (a) and Pt-Al coating (b) samples in atmosphere furnace at 900^oC for 140 h hot corrosion test

Fig.3 Mass change curves of uncoated and Pt-Al coating samples in atmosphere furnace at 900^oC hot corrosion test

Fig.4 XRD spectra of surface of uncoated and Pt-Al coating samples in atmosphere furnace at 900^oC for 140 h hot corrosion test

Fig.5 BSE images of surface morphologies of uncoated (a) and Pt-Al coating (b) samples in atmosphere at 900^oC for 140 h hot corrosion test

Fig.6 BSE images of cross-sectional microstructures of uncoated (a) and Pt-Al coating (b) samples in atmosphere furnace at 900^oC for 140 h hot corrosion test (SRZ—secondary reaction zone)

Table 1 EDS results of different positions of uncoated and Pt-Al coating samples in Fig.6

Table 2 Statistics of thicknesses of cross-sectional structure of Pt-Al coating sample intial and after hot corrosion test

Fig.7 SEM images and EPMA element distributions of uncoated (a) and Pt-Al coating (b) samples cross-section in atmosphere furnace at 900^oC for 140 h hot corrosion test

Table 3 Changes in the standard Gibbs free energy (ΔG_f) for products at 827 and 927^oC^[28]

1	Swadźba R, Hetmańczyk M, Wiedermann J, et al. Microstructure degradation of simple, Pt- and Pt + Pd-modified aluminide coatings on CMSX-4 superalloy under cyclic oxidation conditions [J]. Surf. Coat. Technol., 2013, 215: 16
2	Rehman A, Bidabadi M H S, Liang Y, et al. Hot corrosion behaviour of yttrium and aluminium modified wear resistance coating alloy in mixed sulphate at 900^oC [J]. Corros. Sci., 2020, 165: 108369
3	Liu Y D, Sun J, Pei Z L, et al. Oxidation and hot corrosion behavior of NiCrAlYSi+NiAl/cBN abrasive coating [J]. Corros. Sci., 2020, 167: 108486
4	Montero X, Ishida A, Meißner T M, et al. Effect of surface treatment and crystal orientation on hot corrosion of a Ni-based single-crystal superalloy [J]. Corros. Sci., 2020, 166: 108472
5	Ye L Y, Chen H F, Yang G, et al. Oxidation behavior of Hf-modified platinum aluminide coatings during thermal cycling [J]. Prog. Nat. Sci.: Mater. Int., 2018, 28: 34
6	Jiang C Y, Yang Y F, Zhang Z Y, et al. A Zr-doped single-phase Pt-modified aluminide coating and the enhanced hot corrosion resistance [J]. Corros. Sci., 2018, 133: 406
7	Yang Y F, Liu Z L, Ren P, et al. Hot corrosion behavior of Pt+Hf co-modified NiAl coating in the mixed salt of Na₂SO₄-NaCl at 900^oC [J]. Corros. Sci., 2020, 167: 108527
8	Yang Y F, Jiang C Y, Zhang Z Y, et al. Hot corrosion behaviour of single-phase platinum-modified aluminide coatings: Effect of Pt content and pre-oxidation [J]. Corros. Sci., 2017, 127: 82
9	Li M S. High Temperature Corrosion of Metals [M]. Beijing: Metallurgical Industry Pressure, 2001: 1
	李美栓. 金属的高温腐蚀 [M]. 北京: 冶金工业出版社, 2001: 1
10	Simms N J, Encinas-Oropesa A, Nicholls J R. Hot corrosion of coated and uncoated single crystal gas turbine materials [J]. Mater. Corros., 2008, 59: 476
11	Goebel J A, Pettit F S. Na₂SO₄-induced accelerated oxidation (hot corrosion) of nickel [J]. Metall. Trans., 1970, 1: 1943
12	Potgieter J H, Maledi N B. High temperature corrosion resistance of Pt-based superalloys in 0.2% SO₂-N₂ Gas [J]. Open Mater. Sci. J., 2014, 8: 18
13	Zhang Y, Lee W Y, Haynes J A, et al. Synthesis and cyclic oxidation behavior of a (Ni, Pt)Al coating on a desulfurized Ni-base superalloy [J]. Metall. Mater. Trans., 1999, 30A: 2679
14	Lehnert G, Meinhardt H W. A new protective coating for nickel alloys [J]. Electrodeposit. Surf. Treat., 1973, 1: 189
15	Yu C T, Liu H, Ullah A, et al. High-temperature performance of (Ni, Pt)Al coatings on second-generation Ni-base single-crystal superalloy at 1100^oC: Effect of excess S impurities [J]. Corros. Sci., 2019, 159: 108115
16	Das D K. Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys [J]. Prog. Mater. Sci., 2013, 58: 151
17	Wang R L, Gong X Y, Peng H, et al. Interdiffusion behavior between NiAlHf coating and Ni-based single crystal superalloy with different crystal orientations [J]. Appl. Surf. Sci., 2015, 326: 124
18	Chang J X, Wang D, Liu T, et al. Role of tantalum in the hot corrosion of a Ni-base single crystal superalloy [J]. Corros. Sci., 2015, 98: 585
19	Chang J X, Wang D, Zhang G, et al. Interaction of Ta and Cr on Type-I hot corrosion resistance of single crystal Ni-base superalloys [J]. Corros. Sci., 2017, 117: 35
20	Zhu R Z, Zuo Y, Guo M J. An approach to mechanism of internal sulphidation-internal oxidation during hot corrosion of Ni-base alloy [J]. Acta Metall. Sin., 1985, 21: A451
	朱日彰, 左禹, 郭曼玖. 镍基高温合金热腐蚀过程中内硫化-内氧化机制的探讨 [J]. 金属学报, 1985, 21: A451
21	Haynes J A, Zhang Y, Lee Y W, et al. Effects of platinum additions and sulfur impurities on the microstructure and scale adhesion behavior of single-phase CVD aluminide bond coatings [A]. Elevated Temperature Coatings: Science and Technology Ⅲ [C]. Warrendale, PA: TMS, 1999: 185
22	Grabkee H J, Kurbatov G, Schmutzler H J. Segregation beneath oxide scales [J]. Oxid. Met., 1995, 43: 97
23	Hou P Y, Priimak K. Interfacial segregation, pore formation, and scale adhesion on NiAl alloys [J]. Oxid. Met., 2005, 63: 113
24	Hou P Y, Izumi T, Gleeson B. Sulfur segregation at Al₂O₃/γ-Ni+γ'-Ni₃Al interfaces: Effects of Pt, Cr and Hf additions [J]. Oxid. Met., 2009, 72: 109
25	Jiang C, Besser M F, Sordelet D J, et al. A combined first-principles and experimental study of the lattice site preference of Pt in B2 NiAl [J]. Acta Mater., 2005, 53: 2101
26	Hou P Y, McCarty K F. Surface and interface segregation in β-NiAl with and without Pt addition [J]. Scr. Mater., 2006, 54: 937
27	Rivoaland L, Maurice V, Josso P, et al. The effect of sulfur segregation on the adherence of the thermally-grown oxide on NiAl—I: Sulfur segregation on the metallic surface of NiAl(001) single-crystals and at NiAl(001)/Al₂O₃ interfaces [J]. Oxid. Met., 2003, 60: 137
28	Barin I, translated by Cheng N L, Niu S T, Xu G Y, et al. Thermochemical Data of Pure Substances [M]. Beijing: Science Press, 2003: 67
	Barin I著, 程乃良, 牛四通, 徐桂英等译. 纯物质热化学数据手册 [M]. 北京: 科学出版社, 2003: 67
29	Cadoret Y, Bacos M P, Josso P, et al. Effect of Pt additions on the sulfur segregation, void formation and oxide scale growth of cast nickel aluminides [J]. Mater. Sci. Forum, 2004, 461-464: 247
30	Gururajan M P, Abinandanan T A. Mean field theory of point defects in β-NiAl [J]. Intermetallics, 2000, 8: 759
31	Pint B A, Wright I G, Lee W Y, et al. Substrate and bond coat compositions: Factors affecting alumina scale adhesion [J]. Mater. Sci. Eng., 1998, A245: 201
32	Carling K M, Carter E A. Effects of segregating elements on the adhesive strength and structure of the α-Al₂O₃/β-NiAl interface [J]. Acta Mater., 2007, 55: 2791
33	Dickey E C, Pint B A, Alexander K B, et al. Oxidation behavior of platinum-aluminum alloys and the effect of Zr doping [J]. J. Mater. Res., 1999, 14: 4531

[1]	WANG Di, HE Lili, WANG Dong, WANG Li, ZHANG Siqian, DONG Jiasheng, CHEN Lijia, ZHANG Jian. Influence of Pt-Al Coating on Tensile Properties of DD413 Alloy at High Temperatures[J]. 金属学报, 2023, 59(3): 424-434.
[2]	SU Zhenqi, ZHANG Congjiang, YUAN Xiaotan, HU Xingjin, LU Keke, REN Weili, DING Biao, ZHENG Tianxiang, SHEN Zhe, ZHONG Yunbo, WANG Hui, WANG Qiuliang. Formation and Evolution of Stray Grains on Remelted Interface in the Seed Crystal During the Directional Solidification of Single-Crystal Superalloys Assisted by Vertical Static Magnetic Field[J]. 金属学报, 2023, 59(12): 1568-1580.
[3]	LI Wenwen, CHEN Bo, XIONG Huaping, SHANG Yonglai, MAO Wei, CHENG Yaoyong. Microstructure and Mechanical Property of the Second- Generation Single-Crystal Superalloy DD6 Joint[J]. 金属学报, 2021, 57(8): 959-966.
[4]	XU Jinghui, LI Longfei, LIU Xingang, LI Hui, FENG Qiang. Thermal-Stress Coupling Effect on Microstructure Evolution of a Fourth-Generation Nickel-Based Single-Crystal Superalloy at 1100^oC[J]. 金属学报, 2021, 57(2): 205-214.
[5]	YU Lei, CAO Rui. Welding Crack of Ni-Based Alloys: A Review[J]. 金属学报, 2021, 57(1): 16-28.
[6]	Yimin LIAO, Min FENG, Minghui CHEN, Zhe GENG, Yang LIU, Fuhui WANG, Shenglong ZHU. Comparative Study of Hot Corrosion Behavior of theEnamel Based Composite Coatings and the ArcIon Plating NiCrAlY on TiAl Alloy[J]. 金属学报, 2019, 55(2): 229-237.
[7]	GAO Bo, WANG Lei, SONG Xiu, LIU Yang, YANG Shuyu, CHIBA Akihiko. Effect of Pre-Oxidation on High Temperature Oxidation and Corrosion Behavior of Co-Al-W-Based Superalloy[J]. 金属学报, 2019, 55(10): 1273-1281.
[8]	Yu ZHANG, Qing WANG, Honggang DONG, Chuang DONG, Hongyu ZHANG, Xiaofeng SUN. Nickel-Based Single-Crystal Superalloys (Ni, Co)-Al-(Ta, Ti)-(Cr, Mo, W) Designed by Cluster-Plus-Glue-Atom Model and Their 1000 h Long-Term Ageing Behavior at 900 ℃[J]. 金属学报, 2018, 54(4): 591-602.
[9]	Chengyang JIANG, Yingfei YANG, Zhengyi ZHANG, Zebin BAO, Shenglong ZHU, Fuhui WANG. Preparation and Enhanced Hot Corrosion Resistance of aZr-Doped PtAl₂+(Ni, Pt)Al Dual-Phase Coating[J]. 金属学报, 2018, 54(4): 581-590.
[10]	Xin PENG, Sumeng JIANG, Xudong SUN, Jun GONG, Chao SUN. CYCLIC OXIDATION AND HOT CORROSION BEHAVIORS OF A GRADIENT NiCoCrAlYSi COATING[J]. 金属学报, 2016, 52(5): 625-631.
[11]	Yumin WANG,Shuangming LI,Hong ZHONG,Hengzhi FU. EVALUATION OF THE UNIFORM DISTRIBUTION OF DENDRITIC MICROSTRUCTURE IN DIRECTIONALLY SOLIDIFIED SINGLE-CRYSTAL DD6 SUPERALLOY[J]. 金属学报, 2015, 51(9): 1038-1048.
[12]	Qing ZHAO,Shuang XIA,Bangxin ZHOU,Qin BAI,Cheng SU,Baoshun WANG,Zhigang CAI. EFFECT OF DEFORMATION AND THERMOMECHA- NICAL PROCESSING ON GRAIN BOUNDARY CHARACTER DISTRIBUTION OF ALLOY 825 TUBES[J]. 金属学报, 2015, 51(12): 1465-1471.
[13]	LIU Quan, YANG Yingfei, BAO Zebin, ZHU Shenglong, WANG Fuhui. OXIDATION PROPERTY AND FAILURE MECHANISM OF A SINGLE PHASE PtAl₂ COATING[J]. 金属学报, 2014, 50(9): 1102-1108.
[14]	JING Yanhong, LIU Enze, ZHENG Zhi, TONG Jian, Ning Likui, HE Ping. HOT CORROSION RESISTANCE OF FILLER ALLOY BCo46[J]. 金属学报, 2014, 50(1): 79-87.
[15]	XIE Jun, TIAN Sugui, LIU Jiao, ZHOU Xiaoming, SU Yong. FORMATION AND ANALYSIS OF DISLOCATION NETWORK OF FGH95 POWDER METALLURGY Ni-BASED SUPERALLOY DURING CREEP[J]. 金属学报, 2013, 49(7): 838-844.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed